Pretty Things

I was at the local dealer yesterday getting parts (just not all the right parts).

There were pretty things in the show room:

The new Yamaha FZ-10. Some don't like the look, but anything inspired by anime mech is mega in my books!
It's arresting in person.

The old school Yamaha yellow & black block looks spectacular on the R1...

Like this...  Kawasaki's awe inspiring H2 supercharged missile.

Kawasaki's Z125pro monkey bike, what a hoot that would be (I'd look like a circus bear on a trike on it)

Logo & strakes on a ZX-14.

There is something about a sexy Italian in a bikini (fairing) that fixates me.

Moto Guzzi V7

Lessons Learned From Rims, Tires & DIY

So, the rims are back from Fireball Coatings.  They look fantastic, but I'm a bit baffled by the process.  Mark, the owner, suggested getting candy coated gold, though I'd initially said I'd just go for the plain gold.  After being convinced of the upgrade the process took longer than expected (about 20 days instead of a week) because he was out of the product needed to do it.  Communication wasn't a strong point during this wait.

I was worried about tolerances changing on the inside of the rims, but I was assured that they  would be masked off.  The end result has a fair bit of over-spray, which isn't easy to clean up (which I guess bodes well for the rims themselves in regular wear and tear use).  With a Dremel I've been able to clean up the over-spray and I've begun to rebuild the rims for re-installation.

The final bafflement came when Mark said that black bits dropped into the process and there are minor imperfections as a result.  They are barely visible, but his explanation was that no one does gold candy coat on rims.  This begs the question, why up-sell me on them then?  All the strangeness aside, they do look fantastic, and I'm looking forward to seeing them back on the bike again.  The final cost to coat two rims was just over $300 Canadian taxes in (or about a dollar fifty US).

I'm not sure what I'd do differently next time as I don't have much experience with industrial coatings.  I think I'll give Fireball another go in the future though, just not if I'm on a tight timeline.  I imagine less finicky (ie: rims without a shaft drive hub on them) parts would be less of a headache.  They had a coated motorcycle frame on the floor at the shop that looked spectacular.  Mark figures he can coat all the basic parts of a bike (frame, swing arm, exposed bits and pieces) for about $1000.

Buy 'em online and you're looking at a lot of money for tires
unseen and possible long on the rack.

The tire portion of the process was handled by Two Wheel Motorsport just north of Guelph on Highway 6.  It's my first time doing motorcycle tires (everything previous was well rubbered when I got it and sold safetied as is).  What I've learned is that motorcycle tires are expensive!  And evidently wear out much sooner than car tires (odd considering how they are supporting much less weight on lower mileage).

The tires from the dealer were about forty bucks more per tire than online, but you're buying them on the internet sight unseen, and they might be cheap because they're stale.

I got the benefit of very experienced Concours owners in the parts department helping with tire choices rather than depending on the generic tire size finder online.  No one seems to support the OEM Dunlops that originally came with the bike twenty two years ago, so selecting ZG1000 tires is about preferences rather than manufacturer's recommendations.

The tire pricelist from the Toronto
Motorcycle Show - 2 Wheel was
cheaper, and could get the weird
size for my Concourse.

I was going to go with Bridgestones, but when a guy with over a million miles ridden (!) suggests the Michelins if you want good handling and amazing mileage, I didn't ignore him. 

All was well until I got the $600 bill... for two tires!  I think my last car change was 4 Yokohamas for the Mazda2, and it cost $650 and included balancing and installation.  Like I said, bike tires are expensive!  It was $35 to install each tire - ninety nine and change for the work.  I think I got charged for tire disposal even though the rims were bare, and even though I asked for a 90° valve stem on the back I didn't get one (though I don't think I was charged for it).

I thought maybe buying tires at the Bike Show would save money, but the prices listed weren't as good as the sale prices offered over the desk at Two Wheel, and they didn't have the weird sizes I need for the Concours anyway, so that isn't a way out.

I used to be a tire guy at Canadian Tire when I'd just gotten out of high school.  I know my way around the tools involved.  In the future I think I'm going to try and get tires and bits and pieces online and then do the install myself.  I'm going to install balancing beads on my current tires.  If they work as well as advertised, balancing (the only part that requires expensive machinery) won't be necessary.  When I do the tires on the XS1100 I'll do them in-house and see how it goes.

Speaking of in-house, the last frustration was removing the bearings.  I took them in to school figuring that the autoshop had a press and could take them out easily.  They sat there for a week before I finally took them home and knocked out the bearings in ten minutes.  While there for the week they managed to lose my bearing retaining clips and the front bearing spacer as well, so I'm having to spend another $20 at the dealer replacing parts they lost.  The moral of this story?  Do the work yourself.  You learn more by doing it, and you're less likely to lose parts you need to put the thing back together again.

The missing bits and pieces should be in this week, I should have the bike back on its feet by this weekend.  I'm looking forward to seeing how it looks with its new kicks on.


Parts Costing

                      TIRES                            Online      Dealership   Difference
Michelin Commander II 150/80/16       $174.45        $213.79        $39.34
Michelin Commander II 130/70/18       $208.00        $244.54        $36.54
                                                                                                 --------
                                                      money saved buying online   $75.88
                                                      + gas & time going to and from the dealer (online delivery is free)

Dealer parts total:  $458.33+$4 (shop supplies) = $462.33 (don't see any charge for the valves)
Online order total: $442.61 (including a 90° rear valve & a front valve)

Labour Costing

Dealership installation of two tires (with new valve stems, no balancing, no disposal - though they charged me for that anyway):  $99

How to change your own tires.

The Motorcycle not-so Super Show

A not-so-super Saturday morning.  After driving through thick fog for almost two hours we're told to line up to get in
the parking lot, then line up to get in the door, then line up again to get into the show - it was over an hour wait to
get to the single guy with a ticket scanner.

After a long slog through pea-soup fog we arrived at the International Centre in Mississauga on Saturday morning.  This was my third go at the North American International Supershow, and it's probably my last.  My first go was a bit of culture shock with the girls girls girls and men dressed like pirates thing knocking me for a bit of a loop.  Our second go impressed upon me the real focus of this show:  limited choice but cheap gear if you're lucky.  Our third go was long lineups, dodgy websites, and crowds, though the odd deal was found.

Once again, the only thing we bought was from my local motorcycle shop, Two Wheel Motorsport.  Once again I bumped into Steve who ran the course at Conestoga that got me going on two wheels and got a fantastic discount, this time on a Shark Raw helmet.  $150 for the lid, taxes in (less than half what it's retailing for).

The website the show put out (when it loaded at all)
was insecure.  Management & organization is an issue.

What would be nice would be having access to show specials at my local.  I'd happily spend the hundred odd dollars I spend getting to and into this show and apply it to purchases at Two Wheel.  If that's a possibility I'll save a Saturday next January and avoid the lines, crowds and other nonsense.  I'm going to contact Two Wheel and see if show specials might be available for customers on that weekend at their shop.  Their new digs are twice as nice as the International Centre and it doesn't take you an hour of lining up to get in the door.

The other reason to attend a show is to touch base with your favourite motorcycle media.  I did have a nice chat with Glenn from Motorcycle Mojo but couldn't find Graeme at Inside Motorcycles, though I can see my favourite motorbike magazines at the Toronto Motorcycle Show in February which feels like a much more professionally organized, industry driven event.  I can also take my wife to that one without her rolling her eyes at all the strippers on display.

As far as other people I'd want to chat with, the CoG guys were too busy but I had a good talk with the Widow's Sons.  Even in the cases of these obvious connections I'm a bad joiner.  It doesn't occur to me to contact CoG or the Widow's Sons to go for a ride, I'd rather just go out on my own.  Riding in a group feels like a needless restriction to me.

I'll stick to complaining about the poor organization both online and at the venue, but the show itself is what it is. I'm an odd-duck in motorcycling.  I prefer to ride alone.  I go riding to find solitude and in that solitude delve more deeply into the craft of motorcycling.  Riding to feel a part of a crowd, 'show my colours' or just show off isn't my bag.  I don't ride to be seen or make a statement, I ride because I love riding.

To the dress-alike leather pirates and many other social riders this show must feel like coming home.  Next year I think that's where I'll be.

Coulda skipped that...

Woulda happily have skipped that (this is the passageway you get funnelled into
after getting out of the big passageway)...

Coulda done this at Two Wheel...

Coulda done that at Two Wheel...

Two Wheel's Mega-Edifice

Two Wheel always had a Bartertown/Beyond the Thunderdome/
post-apocalyptic kind of feel to it, but it's all gone now!

My son Max and I went for one of those perfect rides today.  We headed down to Guelph in sunny, room temperature air with no wind.  It was glorious.

After a few stops and lunch we headed back north and swung into Two Wheel Motorsport's new digs.  The building looks impressive from the outside but the insides are something else!  Two Wheel used to have a kind of organic, bigger than where it was situated/post apocalyptic vibe to it, the new place is enormous, modern and shows off their stock like a bike show.

With walls of glass and an open concept, if you've never been to Two Wheel before, it's worth a trip north of Guelph on 6 - you can't miss riding past this motorcycle Mecca now.

Shock & Awe when you walk in the front door of the new building!

Not only can you actually sit on the bikes now (they used to be piled on top of each other so you couldn't get a leg over),
but there is so much space the stock on hand feels more like a bike show than a dealer!

They even had examples of modern art on display!

I could happily walk in to Two Wheel Motorsport and drop fifty grand.  My local dealer has gone pro.  I can't wait to see how they evolve into their new space.

The only downside was having to dual sport my way across the unpaved parking lot on a Concours with a passenger.  Hopefully the drive will be paved soon and then this place will become a beacon for bikers all over the area.  It's worth a ride over to see what they've done.

Around the Bay: Part 4, the kit

900 kms in a day and a half led me to some consideration of the kit involved in this trip:

THE BIKE

First up would be the bike, in this case a Connie I picked up in a field late last summer for eight hundred bucks.

After a winter of repairs, it safetied in April and I've since put on almost two thousand miles with nary a complaint.  It starts at the touch of a button and feels much more substantial than the 650 Ninja I had before.  It also continues to surprise me with its athleticism.


As a long distance bike its comfortable seat and upright riding position (greatly aided by risers on the handle bars installed by the previous owner) make long rides very doable.  It'll manage about 40mpg in regular use and gets up into the mid-forties on the highway at a brisk pace, giving you well over 200 miles to a tank.

I miss the lightness of the Ninja (the Conours weighs over two hundred pounds more than the Ninja did), especially when I do something stupid like ride the Concours into deep sand, but it handles two up riding with ease and still wants to play on winding roads.  As a compromise it's a great piece of engineering that still has soul.  

RIDING GEAR

The Helmet

I picked up a Bell Revolver Evo Warp (!) helmet during the winter.  I tried it on my first trip of the year and it was AGONIZINGLY PAINFUL!  Since then I've had at the inside of it, removing the snap buttons from the padding around the temples.  Without the hard buttons pressing through the padding into the sides of my head like a torture device this helmet has suddenly become very wearable for long trips.  It managed the Georgian Bay run with no pain, though it is heavy and noisy wind-wise.  It looks a treat though.

The perfect helmet? Full face when
you need it, open when you don't.

I'm still looking for the perfect lid.  I enjoy the view and lack of claustrophobia in an open faced helmet, and the better ones seem to offer good wind protection too.  Weather-wise, a full face lid is usually quieter and keeps you warmer when needed.  What would be ideal is a helmet that converts from one to the other.

Jo Sinnott wears just such a helmet in Wild Camping, but those Roof Helmets are impossible to find on this side of the world.

The Jacket

I picked up a Teknic Motorcycle jacket at the North American Motorcycle Show in January from Two Wheel Motorsport.  My first jacket was a discount deal, the first thing that looked like it would do the job.

This Teknic jacket is next level in every way.  It breaths well in warm weather and keeps me remarkably warm when it isn't.  It was able to handle the twenty degree swing in temperatures on this trip with ease.  It's a bit disco, but I like it, and with my initials on it, I couldn't say no.

Too bad Teknic seems to have gone under.

The Gloves

I brought a long a pair of colder weather gloves but never used them.  Between the Concours' wind protection and the multiple talents of the gloves I brought, I never used them.

These leather mits from Leatherup.ca have far exceded any expectations.  They breath well, are warm in the cold and feel both sturdy and protective.  Other than some tired velcro on the wrists that still work, these gloves have been flawless.  I need a red pair to go with the new colour scheme.

The Boots

Another second generation purchase, these Alpinestars MX-1 boots were a second season buy to replace the discount boots I purchased to attend riding school.  Like the gloves, they manage a wide range of temperatures, especially on the well equipped Concours.

Unlike the cheap boots, I sometimes forget to change out of these when I get to work, they're that comfortable.  They did the whole Georgian Bay trip flawlessly.  The only time I'd worry about them is in rain, which I didn't face - they are vented.

The Pants

I brought along a pair of motorbike-specific jeans, but never used them (I intend to pack much lighter next time around).  The Macna pants I got last year but got too fat to fit into fit much better now, and I never took them off.

They look a bit spacey, but I like that.  They breath like shorts and still manage to provide excellent wind protection and remarkable warmth behind the Concours' fairing.  Best pants ever?  Maybe!  The armoured jeans stayed in the panier all weekend wasting space.  These Macna pants are one of the few pieces of kit I can offer no improvements on, they are ace!

The Luggage

The Concours comes equipped with a pair of panniers from the factory which I used for tools and tech on one side and rain gear and clothes on the other.  I generally never had to go into either.

When I first got the bike I got a Givi Blade B47 tail box.  In general use it stays on the back and is used to hold helmets and bits and pieces when I commute to work.  Like my previous Givi it has performed flawlessly.

New for this trip I picked up an Oxford X30 magnetic tank bag for less than half price thanks to Royal Distributing's tent sale in the spring.  What a fine piece of luggage this bag is!  On the ferry to Manitoulin I consolidated the book and camera bags I brought along into it and put them away in the panniers never to appear again (I plan to pack much more lightly next time around).

The Oxford worked as a backpack, camera bag and laptop case.  Fully expanded it carried all of those things and more with room to spare.  It was also nice to lay on when bombing down the highway when I wanted to get a couple of minutes out of the wind.  I'd highly recommend it.

***

Good kit can make all the difference, and what I had for this trip did the job so well I didn't need any of the backup I'd brought along.  After you've done a few trips I imagine you refine the kit until you've narrowed it down to just what you need and nothing more.

I'm still looking for the helmet I fall in love with.  I must have an oddly shaped head, but I live in hope.  I'm going to have to commit to a top tier helmet, but not until I'm sure it fits, and it can do everything I need it to.

Complete Connie

Thanks to the kindness of CoG, some much needed bits and pieces from Murphs Kits, parts from my local Kawi dealer Two Wheel Motorsport and an awesome Givi box and windshield from A Vicious Cycle, the Connie is finally back on her feet!

The parts I needed consisted of your basic filters and fluids, some clutch lever bits, a number of rusty connectors, a speedo gear housing (the cable got replaced too), and replacement levers for the rusted out old ones.  At a CoG suggestion I looked at Murph's and found a full set of stainless replacement fasteners.  The bike was missing a number of them and the rest were in various states of disrepair.  I now have a pile of spares and new ones on the bike.  They look great and the whole deluxe set was less than seventy bucks.  Murph also had stainless replacement clutch and brake levers for only twenty bucks each, so I picked those up too.

The nicest surprise was the Concours Owners Group (best membership fee I've ever paid for!).  When asking about aftermarket options for the master cylinder covers I broke getting rusted bolts out, one of the moderators offered to mail me up a spare set from Florida in exchange for an adult beverage at some future time.  If you own a Connie, COG is a must do.  I get the sense that even if you don't have a Concours, COG is still something special.

With everything back together she hummed around our cul-de-sac in fine form.  No leaks, controls feel sharp, I think she's ready for a run at a safety.  If she passes I'm going to semi-retire the Ninja and put it up for sale and spend the rest of the season seeing what the Connie can do.  Once the snow closes in I'll break it down again and do the body work so next spring it looks as good as it runs.

Getting Connie Back On Her Feet

The front wheel is off to replace
the speedometer gear housing.

So far the cost in parts has been only about $85 for a new speedometer gear from my local Kawi dealer: Two Wheel Motorsport.  Other than that it's been a matter of checking connections and adjusting some poorly run throttle cables.

The gas gauge (reading low/inaccurately) was a loose electrical connection under the tank, cleaned up and connected properly it took about five minutes.  The temperature gauge was similar, just cleaning connections at the sensor (on the left side of the radiator) resolved that.

The speedo was a bit of a puzzle.  I got a new cable assuming the old one has seized (only about ten bucks), but it didn't resolve the issue.  Putting a drill on the cable had the speedometer showing 70km/hr accurately.  The odometer and trip meter both register too, so it wasn't an issue with the gauges.  I looked at the speedo gear housing in the front hub and it didn't spin even when the wheel was.  Robert on the Two Wheel parts desk said these seize up if not lubricated well - they also seize up if the bike wasn't run for a while (as mine wasn't).  He said to make sure I grease the end well when I install the new one.

Well lubed and routed properly, the
throttle cable snaps back perfectly.

The new part should be here Friday.  The local dealer cost about five bucks more than online, but didn't charge me thirty plus bucks in shipping and customs costs, so that's a clear win for buying OEM parts from your local dealer.

The sticking throttle was a matter of taking the cable ends apart at the handlebar and lubing and re-routing them properly - the return cable didn't look like it was installed properly on the higher-rise custom bars on the bike.  After lubing the cables and cleaning the handlebar mechanism I routed the return cable in the proper spot behind the pull cable.  It was tricky getting it all back together again, but once it was done up the throttle was tight, smooth and snapped back like a champ.

I'm hoping to have the speedo done in the next couple of days and then put the bike together for a safety next week.

Demo Daze

Kawasaki Canada's Demo-Day, if there is one in
your neighborhood, I highly recommend heading
out for a day of diverse riding experience.

There aren't many opportunities to ride motorcycles when you first start out.  If you're a new rider buying even a second hand bike generally happens without a test ride.  Based on very loose ideas of what fits and the advice of others, you wind up on a machine with little or no idea of how it might work with you.  I purchased my Ninja 650 without test riding it and I often wonder if I would have had I a chance to ride other bikes.

This past Saturday I spent most of the day at Two Wheel Motorsport in Guelph riding a variety of bikes from Kawasaki Canada.  Kawasaki's demo-days lets you sign up to ride your choice of pretty much their full range of bikes, and it only costs you a donation to the Canadian Cancer Society.




The demo-day setup is a well oiled machine with a Kawasaki trailer set up along with tents to cover the bikes.  After a briefing on what to do if separated and the expected 'don't ride like a fool' safety talk, you're ready to go.  The ride is 20-30 minutes and took us through country roads, small towns and offered some twisty bits as well as opportunities to open up the bikes.  One of the safety tips before we began was to not grab a handful of brakes if you're coming off an older bike.  The more athletic machines have such good brakes that you might launch yourself if you grab them too hard.


After the ride you get a debrief and chat with the Kawasaki people there who are very responsive to rider feedback, often taking notes on what people are saying.  Apart from the opportunity to ride all of these new machines, it's also nice to see a company so interested in getting ground-level rider feedback.

The people at the demo-rides ranged from early twenties to seniors and on some of the rides there were as many female riders as male.  Some people went out on the same kind of bike that they rode in on, others were obviously looking to try something specific, and then there were the few ding-dongs like me who just wanted to try as many different bikes as they could.

I ended up riding everything from a Z1000 naked sport bike to the all rounder Versys and even a little Ninja 300.  I'll go into details on subsequent posts, but I'll end this one saying, if there is a demo-day going on in your area, head out for a couple of three hours of riding that will expand your appreciation of just how different motorbikes can be.  If they're all run as well as Kawasaki's was, I'll be heading out to others at earliest opportunity!

A sea of green... a chance to ride everything from a KLR650 to a ZX-14r or a Vulcan!

Fighting The Urge for Sensible Compromise

I picked up my sprockets & chains today from Two Wheel Motorsport.  I then had a chat with Craig, who works there and was the head instructor on my motorcycle course at Conestoga College last year.  He mentioned the used bikes upstairs (TWM goes on and on, be sure to wander around if you go there).  I was interested in a Kawasaki Concours they had on sale because it's a sensible touring bike.  Craig mentioned 'upstairs' when I was asking about used bikes.  I didn't know they had an upstairs.  After getting my parts I went up and found a couple of dozen bikes and no one around.  Since I was looking for a sensible touring bike I immediately found this and took this:

I'm really bad at trying to be sensible.  I ended up buying my current Ninja because of the way it made me feel rather than the sensible KLR I was going to get.  When it comes to buying an appliance like a car I'll be sensible, but a motorbike isn't about being sensible and I don't want to waste my riding time on bland compromise.

I met John the salesman and we finally found the Concours out back.  It's not as big as some other touring bikes, but my knees are still pretty bent on it.  Short of getting some sky-scraper adventure bike I'm going to be bent legged on a motorbike, especially if it's as road-centric as I want it to be.

I suspect the answer still lies in not trying to find a bike for all things, they don't exist.  Instead, a couple of really focused bikes that do different things would do the trick.  Instead of trying to find an athletic road bike that two-ups my son easily, get a machine that caters to time with him and another for solo forays.

The other day a guy road by on a Triumph with a Rocket Sidecar.  I've still got a thing for sidecars.  Uralling or Royal Enfielding up would cover the vintage bike itch as well as the weird sidecar itch in addition to creating a very friendly shared riding experience with my son.  The other bike could be some kind of bat-shit crazy single seater that focuses entirely on me alone on the road (or track).  Or a café racer...

I'm glad that Concours made a big wet noise in my imagination when I saw it with its C.H.i.P.s style windshield and acres of plastic.  A sudden, irrational urge to own it didn't follow.  What it did do is clear up an important point:  don't compromise on what you want a bike to do for you, you'll only end up disappointed.

John the salesman told me the story of a kid who missed the bike he fell in love with by twenty minutes and ended up with tears in his eyes over it.  If I'm going to move on to another bike, it's got to be a tear jerker.  I didn't get into motorcycling for sensible, I got into it for an emotional connection to my machine.  Fortunately, that bonkers bike choice isn't crazy expensive.  An '06 bike with only 2400kms on it costs less than $7000 from Two-Wheel.

For another $7k I could pick up an almost new Versys and go about getting it kitted out with a cool sidecar from Old Vintage Cranks.  It'd be one of a kind on its way to being a multipurpose outfit that I could customize indefinitely.  For $14k I'd be into one of the most powerful two wheelers ever made and a truly unique go-anywhere 3-wheeler.