It's an Appliance

It's an appliance, you know, like a fridge...

I'm back at school this week and getting to know my new students.  In our grade nine introduction to computers class they're putting together tech-resumes so I can see what their background in tech is.  One of the nines has a prezi covered in pictures of Ferraris.  I asked him what that was all about and he said, "I love cars!"

I was surprised by my response, "they're appliances dude!"

Some of them even look like fridges!  Guess what the most
popular car colours are... just like appliances!

I've been a car-guy for a long time (since I got one when I was seventeen because my parents ponied up the difference between a car and the motorcycle I was going to get).  On the list of things I thought I'd never say, calling cars appliances is near the top, yet out it came.

Appliances are used to make domestic chores easier, things like commuting, or going shopping.  They keep you dry when it's wet, keep you cool when it's hot, and warm when it's cold, and they get you where you need to go.  They're so easy to operate that most people who use them have no idea how they work and don't care.  The vast majority of people on the road last focused on how to drive when they were getting their license, once they have it they simply operate their vehicles on habit for decades.  Cars are a necessary appliance for modern life, and that's how people use them.


Fetishizing cars is where I found an odd resonance.  As engineering and design efforts, I can still appreciate the mechanical and design elements some cars display (one of the reasons I still look forward to watching Top Gear who focus on those things), but when I see someone driving down the street in a pimped out Pontiac Sunfire I have to wonder what is wrong with them.  It's like putting a wing on an oven.

What kind of license do you need to drive a car?  In Ontario it's a G-general license, good for cars and light trucks.  Two-thirds of Canadians have a driver's license.  Older drivers who probably shouldn't be on the road keep general licenses active, we hand out automotive licenses to children before we allow them to vote.  Driving a car offers access to an appliance that the majority of people feel they need.

When I have to take a car to work it's for appliance like reasons (I need to pick up equipment or move stuff around), it's never an enjoyable experience in and of itself.  I want the car to work, to be efficient, and to last a long time... like any other appliance. 

I drive very well.  I've spent time and money improving my ability to handle a four wheeled vehicle in advanced driving schools and on the track and I've driven on both sides of the road on opposite sides of the world, but the thought of hauling tons of seats and dashboard around a track seems absurd to me now.  I'll make an exception for racing vehicles stripped to the essentials, but my interest there is mainly in the engineering rather than the driving.  The complex, raw interaction between rider and machine on two wheels is much more interesting to me now.

I have been drifting away from driving as a ecologically irresponsible means of recreation for a while, though the years I've spent getting familiar with internal combustion engines has made me a fan of their engineering.  The brutal minimalism and efficiency of a motorcycle allows me to keep that connection alive knowing that I'm burning as little gas as possible to carry the least amount of weight in the most entertaining fashion.

I'll leave the appliances to the masses.  They can get into their refrigerator white or silver vehicles and putter about in a distracted, isolated way, using way more of a diminishing natural resource and producing more waste to support a wasteful, simplistic, accessible means of transport that the majority of people can manage (poorly).  I think I'm at peace with what came out of my mouth in class, though it surprised me at the time.

appliance

[uh-plahy-uh ns]

1. an instrument, apparatus, or device for a particular purpose or use.

2. a piece of equipment, usually operated electrically, especially for use in the home or for performance of domestic chores, as a refrigerator, washing machine, or toaster.

Perfect Moments

Riding a motorcycle feels special every time I do it, but I had a couple of perfect zen moments on Wednesday that approached nirvana.  After dropping off my son at day care I was trundling down an empty country road in a golden, early morning fog on my way to work.  

You feel more connected to the world around you on a motorcycle because you're vulnerable and exposed to it, and in that moment the beauty of creation came flooding in.  Unimpeded by windshields or closed off in a box, the sights, smells and sounds of the world filled me with happiness.  The machine and I were a single thing, gliding through the golden morning mist.

I got to work with a smile on my face that wouldn't go away.

Later the same day I was riding home from a meeting after dark.  The half moon was so bright it lit the few scudding clouds in the sky, the rest was a dome of stars.  

Riding through the dark countryside I would drop down into pools of ground fog, my head just above the silver mist.

If you're on two wheels you feel like you're flying most of the time, but as I tore through that ground fog I felt like I was was truly learning to fly.

From the golden fog of sunrise to the moonlit night, it was a beautiful day to be out in the world, and my motorbike delivered it to me as only two wheels can.

Night Ninja
beneath a darkened sky
skimming through the dark
under a dome of stars

Retro Moto Wish-List

Some retro-moto bits that I've come across that sparked the I want urge...


Austin Vince Custom Vintage Overalls!
Custom made by the man himself!  Vintage overalls in the colours of your choice.  I'm thinking blue with red and white stripes...

www.austinvince.com

~$400Cdn

Bell Bullitt Retro-modern Helmet
If you've seen Rush then you know the look, and this modern remake of the classic Bell helmet catches it.

www.canadasmotorcycle.ca

$432

100mph t-shirt 'ton-tee'
Triumph looking logo but advertising the ton instead of a specific company... nice!

http://100mph.bigcartel.com/

$30

Vintage Race Fairing
I might be doing this a bit backwards, but I love old race faired bikes.  A 1970s Honda CB750 would get turned into a race replica and make an ideal vintage racing machine.  It all starts with a fairing!

https://www.denniskirk.com

~$200 (fairing)

Spartan Leather Vintage Race Suit

A tailored suit with race quality materials and armour.  As they say, less 'Ricky Racer' than your typical TRON styled current racing suits.  

www.spartanleathers.com

$950+$260 in armour upgrades

I'm enjoying my current Kawi garage a great deal.  Fixing up the Concours and riding the Ninja is a good time, but I suppose we're all rooted in the aesthetics of our youth.  As a child growing up in rural England watching the height of the British motorcycle industry roll by in the early nineteen seventies, I tend to return to that look and the associated nostalgia.

Keith Code's Twist of the Wrist

A must read if you're serious about
understanding motorcycle dynamics

Reading Keith Code's Twist of the Wrist 2 on Kindle last night and came across this!  The part I'm in right now goes over how motorcycles tend to be self correcting (unlike cars).

When I bike starts to slide at the back it pushes the front wheel in the direction you want to go (unlike a car that pivots on the front wheels and requires you to counter steer into a slide).

The worst thing you can do on a bike is attempt to force a counter steer into the handlebars.  When you do this you're creating huge torsional pressure between the front and back of the bike.  The bike resolves this by snapping back violently, launching the rider over the high side of the bike leaned into a corner.

Code keeps drilling in the point that the bike wants to self correct.  If you're loose, relaxed and gentle with the controls the bike will bring itself back into alignment, even if the back wheel is sliding.

Even backing off the throttle suddenly on a rear wheel slide can cause a high side (you suddenly dump all the bike's weight onto the front wheel causing it to snap back).  It might seem counter-intuitive, but in a slide maintaining throttle and letting the bike sort itself out will resolve most slides.  It's a rider's involuntary reaction due to fear and a lack of understanding of how motorcycle dynamics work that result in most corner related crashes.

I've been making a point of practicing throttle control in corners, using lower approach speeds but rolling the throttle on with a light hand as early as possible to balance the weight of the bike 60/40 over the back wheel.  I'm amazed at how settled in a corner the Ninja is now.

Motorcycle dynamics are a completely different beast from car dynamics.

Sense of Accomplishment!

It's alive.... ALIVE!!!

After fiddling with the speedometer gear housing I was told to make sure I have the line on the back of the suspension and the housing lined up.  I put it back together that way and still didn't get anything, so I took it apart again and tried putting it on 180° from before and bingo, the speedo began to spin.  If you're having trouble with speedo gear housings, try putting it on the other way and turning it to line up with the fork housing mark.

Love that red - the Connie will be getting panels refinished
over the cold months...

All the gauges on the Connie work now, so I'm going to begin to reassemble it after changing out the oil and filter.  I'm hoping to have it back together in the next week or so and then I can take an honest run at a safety and see how it does.  Everything else seems to be in good form.  It starts at a touch of the button and idles steadily after a moment on choke.  The throttle is clear, sharp and very responsive now.  The
brakes feel strong and sure.  After reassembly and a final cleanup, hopefully it'll fly through safety and then I'll have to make some hard decisions about the Ninja.  

It would be nice to get some miles on the Connie before the snows fall.

New speedo cable runs in behind the bottom of the front shock from the right.  It reads accurately and runs quietly.

Hard not to love that big one litre engine... it burst to life with a growl and revs with surprising eagerness.  Smooth as butter too...

Everything comes to life and reads accurately now...

Track Day Dreams Part 2

For a first trackday using an intermediary like Pro 6 Cycle gives you the support you'd need to ensure your bike is prepped well (they have tires, mechanics and other bits and pieces on hand).  Pro 6 runs track days at Calabogie Motorsports Park in Eastern Ontario.  It happens to be on the other side of some of the best riding roads in Ontario, and on the way to my buddy's house in Osgoode.

A couple of hours at speed on the highway and I'm up past
Gravenhurst and turning toward the Haliburton Highlands!

For me the trip is a Southern Ontario grind out and up the 400 before turning east to face some of the nicest roads in Ontario.  Giving three hours for the highway part, I'd aim to meet up with Jason somewhere in the highlands and then we could ride the twisties to Calabogie.

Day one would get me into the Highlands.  Day two would be riding twisties.  Day three would be the track day at Calabogie and Day four would be the return ride home.

To prep for the track day I'd swap out coolant for distilled water at home before the trip and practice stripping the bike down (covering and disconnecting lights, removing mirrors).  I'd also strip the bike back as light as possible, removing the passenger pegs for single pegs, the toolkit, any extra attachments at all.

I'd get a big duffle to carry my gear for the track day (I'd carry rain gear and clothes in a separate, smaller bag).  The track duffle would have to be big enough to carry track leathers, tools, a bike stand and the parts needed to prep the bike.  The idea would be to get to the track and be able to open up the bag and prep the bike quickly and efficiently.

The trackday bag would open up trackdays around Ontario, and once I'd experienced how the pros at Pro 6 Cycle do it, I'd be able to prep better for future days.

I'm a ways away from this at the moment.  Here's a wish list of needed bits and pieces:

A Vicious Cycle
Firstgear-Torrent waterproof duffel = 40l... should carry everything needed for a trackday...

$84

motorcyclesuperstore.ca
Alpinestars S-MX-5 Boots




$264

motorcyclesuperstore.ca
Alpinestars GP PRO one piece leather suit
Size 50 - this one's a bit tricky.  I'm everything from a 2-4x (tall, long in the body, shorter in the leg and triangle shaped)
$857 (on sale!)

A full body suit is going to be a tricky proposition off the rack.  There are some custom options out there, but you're buying from the other side of the world and I imagine returning a poorly done suit would be next to impossible.  That TopGearLeather site offers custom race suits for less than the off the rack retail suits (~$600), but caveat emptor (they may be awesome, I don't know).

motorcyclesuperstore.ca
Alpinestars GP PLUS gloves


$190

motorcyclesuperstore.ca
Schuberth SR1 Stealth Helmet



$950

motorcyclesuperstore.ca
Vortex V3 rear bike stand


$90 (+$70 wheel kit)






So I'm looking at about $2600 worth of riding kit before I even start considering the bike, and I'd want to consider the bike.  I'd start with the current Ninja 650r and build up experience and certifications, but I'd eventually like to get into The Vintage Road Racing Association.  The dream would be race prepping a 1980s Honda Interceptor (strip lights and extras, whittle it down the bare minimum, race prep the engine), and race it!

Racing ain't cheap.  I'd be dangerous if I had a lot of money and free time on my hands.  Since the summer's almost over and I'm back to the classroom, I'm hoping to put together (Kijiji, ebay, whatever cheap alternative I can find) the bits I need to get myself on a track next year.

If I can't arrange the equipment, I might (make a big) ask for the Racer5 3-stage introduction program.  It's one hell of a birthday present, but if supported track days cost you about $250 a pop anyway, paying an extra hundred to rent someone else's bike and get close instruction seems like one hell of a deal.

LINKS

• Respster Wears race suit (ebay)
• Leatherslink race suit (ebay)
• Leatherslink site
• Jackets4bikes (ebay)
• Spartan Leathers (I like this one, less, as they say, 'ricky racer')

FOLLOWUP

I tried on the Joe Rocket race suit at Royal Distributing the other day.  It was a 46.  It fit at the shoulders and waist/legs, but it was too short in the body.  If I were proportioned properly I'd be about 5'11", but with this long body I'm 6'3", my inseam is only 32".  I'm hoping a 48 is a bit longer in the body, and would be a loose fit everywhere else.  I wish there were more local places I could go try race suits on.  If RD gets a 48 in, that might end my quest for a suit for now.

Getting Connie Back On Her Feet

The front wheel is off to replace
the speedometer gear housing.

So far the cost in parts has been only about $85 for a new speedometer gear from my local Kawi dealer: Two Wheel Motorsport.  Other than that it's been a matter of checking connections and adjusting some poorly run throttle cables.

The gas gauge (reading low/inaccurately) was a loose electrical connection under the tank, cleaned up and connected properly it took about five minutes.  The temperature gauge was similar, just cleaning connections at the sensor (on the left side of the radiator) resolved that.

The speedo was a bit of a puzzle.  I got a new cable assuming the old one has seized (only about ten bucks), but it didn't resolve the issue.  Putting a drill on the cable had the speedometer showing 70km/hr accurately.  The odometer and trip meter both register too, so it wasn't an issue with the gauges.  I looked at the speedo gear housing in the front hub and it didn't spin even when the wheel was.  Robert on the Two Wheel parts desk said these seize up if not lubricated well - they also seize up if the bike wasn't run for a while (as mine wasn't).  He said to make sure I grease the end well when I install the new one.

Well lubed and routed properly, the
throttle cable snaps back perfectly.

The new part should be here Friday.  The local dealer cost about five bucks more than online, but didn't charge me thirty plus bucks in shipping and customs costs, so that's a clear win for buying OEM parts from your local dealer.

The sticking throttle was a matter of taking the cable ends apart at the handlebar and lubing and re-routing them properly - the return cable didn't look like it was installed properly on the higher-rise custom bars on the bike.  After lubing the cables and cleaning the handlebar mechanism I routed the return cable in the proper spot behind the pull cable.  It was tricky getting it all back together again, but once it was done up the throttle was tight, smooth and snapped back like a champ.

I'm hoping to have the speedo done in the next couple of days and then put the bike together for a safety next week.