Saturday 18 September 2021

2021 Toronto Motorcycle Film Festival

TMFF kicks off this weekend and, after a year of only fully remote streamed films they're also doing live showings in theatres again. Back in 2019 in the glorious ignorance of the pre-pandemic we went down to Hamilton to watch a live screening of some of that year's top films.  It was a great night out in a theatre full of russling motorcycle gear (pretty much everyone in the audience rode to the theatre).  I'd like to go for a ride to see films live but with my government turning me into Typhoid Mary I don't think it prudent to share my burst pandemic bubble with others.  Fortunately, TMFF is still doing home-streaming and they're showing one I've been looking forward to by Leaving Home Funktion's:  972 Breakdowns:  On the Landway to New York:
 

The technical setup is straightforward and they even shared a test-your-connection link this week so I know it won't be frustrating when I sit down to enjoy this adventure.

The list of films this year is long and distinguished.  If you're in Ontario you can watch them in the theatre if you've been missing that, but if you're still in a defensive posture with COVID you can also just stream to your home.

In a year where I'm missing extended riding trips and feeling very much trapped by my circumstances, the chance to follow Leaving Home Funktion on their adventure across the world will feel like a much needed breath of fresh air.



Saturday 11 September 2021

Old Bikes Have Soul: A ride out to Ross Hergott Vintage Cycle in Wellesley

This caught the eye of Alanna a few weeks ago and we rode out to Wellesley, Ontario to Ross Hergott Vintage Cycle today to have a look:

We're both still in recovery from week one of year two of pandemic school, but we finally got ourselves into motion after noon and made our way through some fierce winds to Wellesley, which is one of those places that's only 45 minutes away but I've never been too.

The goal was this all day vintage motorcycle ride-in and we saw old bikes on the road coming and going.  While we were there at least a dozen riders were hanging about, chatting and looking over what Ross had on display along with what they'd ridden over on.

Ross has a fanastic shop - the kind of place that looks like it has grown out of the ground with layers upon layers of collectables, tools and bikes that could only look like it does because he's been there for decades.

We had a chat with a guy who rode a 125cc 1950 BSA Bantam over to the meet.  The tiny bike had been in his family for generations and he knew a lot about its history and restoration.  Old bikes like these tell a story simply because they are survivors.  Of the tens of thousands of BSA Bantams churned out in the 50s and 60s, only a handful remain, and to see one of them in fine fettle at this meet was a real treat.

My trouble-making pillion suggested the kid with the chopper pit bike take on the Bantam in a race.  It wouldn't be much of a race (they didn't exceed the speed limit at any time because they couldn't), but it was fun to watch the kid stall out and the old BSA putter off down the road to victory:


There were a couple of well looked after 70s Triumphs for sale at this meet.  Going for about five grand, they put the lie to that Tiger I'd been looking at online in a previous post.  I'm still hoping I can find a reasonably complete older British bike that I can rebuild from the inside out for a couple of grand and then bring it back to working order.  I'd thought that project would be a Triumph but after seeing some of the lovely BSAs at this meet (I'm a sucker for a polished alloy tank) I'm starting to think that perhaps something from Birmingham Small Arms might be in my future.  I'm hoping for a simple, light-weight, air-cooled machine that lets me get analogue in a deeply mechanical way.  A twin would be ok but a thumper would be even more on point, and BSA made some wonderful thumpers...

That blue BSA back there scratches an itch!

I'd feared it would be a Harley Davidson snooze fest but there was an interesting mix of old British bikes in addition to the HDs on hand - no Indians though, which was a shame.  Harleys always make me think of mennonites (Wellesley is in the middle of mennonite country so they were on my mind).  At one point Harleys were state of the art machines but they suddenly decided to stop evolving and just push out variations on the same theme for decades.  The motor company's recent bikes show a rejuvinated interest in modernizing their designs.  From Charlie and Ewan's latest Long Way Up on electic HDs to their Pan American adventure bike and newest Sportsers, HD is flexing some engineering muscle and suddenly considering them doesn't seem as absurd to me.  I hope this new forward-thinking approach pays off for them.  I want to be a fan.

We had lunch at the Nith River Chop House (great food, but don't be in a rush, they won't be) and then rode over to a Eco Cafe on the Connestogo River in St. Jacobs for a nice coffee on the patio overlooking the river.  There we ran into an old fella named Albert who must be closing in on 100 years old.  He's dealing with terminal bone cancer but told us some amazing stories about the decades he spent farming in South Western Ontario as the world evolved around him.  I'm feeling old and this guy had over 40 years on me.

I don't often head into farm-world to the west of us (lots of bugs due to the livestock and tedious, straight roads), but this ride out to Wellesley had me looking at the landscape in a new way, and knowing there's an interesting classic/custom shop out that way means I'll be keeping it in mind for future rides.  If nothing else, the chance to ride on roads I haven't been round and round on during this past year of pandemic lockdown felt like a breath of fresh air.  The chance to see old bikes was the cherry on top.




HD have always had an eye for style - this modern art inspired badge is lovely, then they stuck it on with a couple of philips screws, which casts a light on the other side of Harley ownership.


I get the urge to customize but at some point throwing away a bike's ability to handle for looks ceases to make sense to me, though you've got to appreciate the effort, I just don't share it.  I like a bike that prefers corners to straight lines.


A 1971 Triumph TR6 650.  This fifty year old survivor was also in excellent shape, and only five grand!





If you love chrome, HD have you covered.

I can't say Nortons have ever lit my fire, though I can appreciate the brand's historical significance.  Having said that, this 750 Commando is a lovely thing!  Look at those pipes!


1970 Triumph Daytona, Seven-Thousand, five hundred of your finest Canadian Dollars!  Restored in 2014, it's been sitting in someone's recroom ever since!  A close-up look revealed a lovingly looked after old machine.

Birmingham Small Arms Bantam - and one of the smalled, simplest carburetors you'll ever lay eyes on!



If any of these get your motor humming and your wallet out, get in touch with Ross, he might be able to help you out:  Ross Hergott Vintage Cycle.

Monday 6 September 2021

Winter Project Wishes in Absurdist Ontario

Trawling online advertising for a next level winter project and I've come across an interesting option, but then I remembered where I am. 

1968 Triumph Tiger 

An old Tiger built the year before I was born?  You have my attention.

This is a brown Tiger with a hundred sixty plus K on it?  They say it runs and it's stock but it needs work - that might be the understatement of the year.

Either that 163,908kms isn't accurate or this thing has been run into the ground.  If that's the case, it's not stopping them for asking four and a half grand, FOUR AND A HALF GRAND (!!!) for it.

Canadian prices for bikes, even old ones that look like piles of shit, never cease to amaze me.


Just for giggles I set FB Marketplace to the UK and had a look at what's on offer back home.  Here's a lovely, well restored and ready to ride 1961 Triumph Tiger with less than 2000 miles on it for £2100 ($3645).  Luckily I live in Ontario where a steaming pile of pooh will cost me a thousand bucks more before I then have to pour that much into it again to make it work.  I live in an absurd place.

The other nice thing about the UK is that they tend to honour their history and keep things going.  Canada has a much more use-it-and-chuck-it-in-the-bin approach.  There are some lovely pre-war bikes kicking around on UK's bike marketplace.  If my novel took off and I was minted, a pre-war Triumph Tiger like the one my hero rides in the book would be on my wishlist.

Here's just such a thing!  A 1938 Triumph Tiger 80.  It's meticulously looked after and I'd greatly enjoy being the steward of this piece of history before passing it on to someone else who would keep it rolling into the future.

It ain't cheap (dream machines never are).  They're asking £12,000 ($20,828) for it, but it'd only go up in value, unlike a new Honda Civic (they cost about the same).  It's been on sale for a month.  Bet I could get a bit off.  It wouldn't be a daily rider, but on the days I did ride it, oh baby!  The project would be keeping it going and learning the maintenance and repair on it.

In Ontario this bike doesn't exist.  If it did exist, some berk would want half a million dollars for it.

Sunday 29 August 2021

A Ride To Watch a Blue Horizon


 





270km round trip up to Georgian Bay to meditate on the big water.



Flesherton to Highland Grounds for a locally owned (and one of the best) Americano you can get in South Western Ontario.








Beaver Valley has some beautiful views and winding roads.


Graham Hill is worth going off pavement for, as long as the bike's up to it.




After a winding ride down Beaver Valley to Thornbury Harbour I found the Bay growling in the wind.  It was 10 degrees cooler on the water.









After a sit by the water I headed back into the inland heat and tackled the Grey Bruce Highlands around Glen Huron.









After a rehydration stop on the Noisy River near Creemore I tracked back through the flat, straight, tedious farming desert back home to Elora.


270kms in intense heat - the 18 year old Tiger was flawless.

Thursday 19 August 2021

Kawasaki Concours14/GTR1400 Kawasaki Foot Peg Ergonomics

Taking bend out of the bike: the
changes pegs and bar risers
have made so far.
The Concours 14 is an excellent long distance weapon, but it's built for someone much smaller than me.  When you're tackling motorcycle ergonomics you can't just slide a seat back, you've got to physically change parts, and the Concours parts aren't fit for my intentions with it.  I sold a Honda Fireblade to get this bike and it wasn't a like for like replacement.  If I'd wanted (or been able to use) a full on sports bike I'd have kept the 'Blade, so I'm not trying to pretend the Kawasaki is anything like the Honda.  The side of the C14 I'm interested in is the long distance/two up riding bit.

With that in mind this otherwise stock, low mileage 2010 Kawasaki Concours felt like it was trying too hard to be a sports bike when it simply isn't one.  The Honda only gave up 15 horsepower to the Kwak but was over 100kgs lighter!  After one 2+ hour ride the steering, while quite touring in appearance with long bars sweeping back from the headstock, are way too far forward and low for what I want to use the bike for.  At 6'3" and 250lbs I'm also clearly not the average rider Kawasaki was aiming at with the rider ergonomics.  To solve the lean I put in Murph's Kits bar risers which bring the grips 3/4 of an inch back and 1-3/8 inch up toward the rider.  This resulted in a 3% less lean and they installed very neatly, looking stock.

I could live with the pegs but my knees were feeling it on longer rides and my big feet meant I was sitting pigeon toed while trying to keep my feet off the rear brake and shifter.  What sold me on Murph's Kits rider pegs was the promise of no more awkward, pigeon toed foot positioning thanks to the angle in them.  They were straightforward and quick to install (10 mins?) and reduced knee angle a couple of degrees while also allowing me to rest my big wamps on the pegs instead of having to hold my feet off them awkwardly.  A nice bonus is if I hook my boot heels on the new pegs they drop into the windflow under the bike and feel great in vented boots on a hot day; no regrets with that choice either.

But none of this has helped my passenger feel comfortable on the bike, which was a major reason I pitched the Fireblade for a sports tourer.  WIth the panniers on the Connie leaves no room for passengers with big western feet.  The passenger pegs are also set very high, so high you'd have to be seriously into yoga to look comfortable on them.

Unfortunately, Murph ran out of gas after the rider pegs and doesn't offer any passenger peg alternatives.  A bit of lurking on message boards uncovered VicRay Custom Performance who machine a set of passenger pegs for the Concours 14.  Vic sends these kits out himself and it took a few weeks longer than Murph's deliveries (don't sweat Canadian deliveries if you're dealing with Murph, he's got them down!).  Vic's passenger pegs finally arrived this week and I installed them this afternoon.

The instructions were hand written but the installation was well explained and straightforward.  The quality of the machining is excellent and the extension of the pegs means we should have no more passenger ergonomic headaches while riding with panniers.  The rubber isolation and width of the alternate passenger peg also promises greater comfort.  We've been busy with work (contrary to popular belief, teachers work in the summer), but I'm optimistic about this choice too.  The new passenger pegs fold up neatly and suit the look of the bike.  If you didn't know they weren't stock you'd just assume they are.

The last piece of the puzzle is the seat.  The C14 seat is narrow and gets to be quite miserable on longer rides with an awful lot of pressure on your, um, parts.  Alanna described it as, 'hard on the vagina.", so it's uncomfortable for both rider and passenger.

The last time a poor OEM seat made me sad a Corbin saddle solved the puzzle.  I'd have gone for a used one but they retain their value and the used ones I could find were within a hundred bucks of getting my own custom designed seat.

Pre-pandemic my Tiger seat showed up in a surprisingly quick four weeks.  I'm five weeks into having ordered this time but I fear COVIDtime will strike again and the saddle won't show up for some weeks yet.

The pegs relax the legs and the bar risers ease the crouch.  Big Blue is more comfortable than it has ever been and is starting to show the promise of the touring/sports/muscle bike I was aiming for.  Once that Corbin lands it'll be ready to ironbutt on.