Snow's A Fallin'

It's accumulating outside.  While that's happening, I'm in the garage busy stripping the Concours down to its underskirts.

Once that's done I'll give it a final cleanup before getting into the brakes and bearings.  While the wheels are off I'm going to look into getting them refinished.  Fireball Performance in Erin does wheels, so I'll see if I can drop off the rims while they're off the bike.  I'm curious to see just how magical a transformation that can be, and what it costs.

The partially stripped Concours.  It made me wonder what a stipped Connie would look like... pretty fantastic as it happens:

Strange that I've been through the Yamaha's carbs in detail, but never the Connies...

With her skirts off, the Concours still looks good for a 21 year old motorbike that spent too much time outside.  A drop of
coolant on the back of the block has me in full suspicion mode - I'm hoping it's a bit of overflow splash, but mechanic's
skepticism tells me it'll be a leaking water jacked and a lot of gasket work - the coolant reservoir isn't low...

IIHTM (If I Had The Money): September in Spain & Then The Long Way Home

This is why it's good to be friends with Austin Vince on Facebook, it makes you daydream.

What would I do if I were free of money and the time constraints it demands?  I'd be planning a month in Spain next year!

The week of the 19th to the 23rd (Monday to Friday) would be doing the Pyrenees with Austin and crew on my Triumph Tiger Explorer.

The Aragón round of MotoGP happens on the next weekend!

I'd aim to get in country with my bike in the first week of September and then have the  a couple of weeks toodling about before a week in the Pyranees with Austin Vince!  After the Austin week I'd be straight over to Aragon for the MotoGP weekend.  After a couple of days of getting organized, the long trek home would begin... the long way round!

A week riding the Pyranees with Austin Vince, and then a weekend at MotoGP Aragon!

Spain to Tokyo via Southern Europe, India, South East Asia and China, would be one hell of a ride.  A flight to L.A. would have me riding through the southern States before heading north and home in the spring.

Bike shipping to Europe?  about ~ $1000
http://canadamotoguide.com/2015/03/03/air-canadas-new-motorcycle-cargo-options/

http://www.thethinkbox.ca/2012/11/18/how-to-fly-and-store-your-motorcycle-overseas-for-touring-without-using-a-shipping-company-cheaply/

http://www.ridedot.com/faq/  

http://www.horizonsunlimited.com/get-ready/shipping-the-bike

I couldn't find anything off-hand, but I'd guess about $2000 to fly the bike back into North America.  I could always ask Austin how he did it.


Timing of a fall Spain to Japan trip?

Southern Europe: September/October
India/South East Asia: November/December
China/Japan: January/February
Southern US:  March/April



This route is about 29,000kms with 3 air cargo bits and one hell of a ferry ride:
Toronto to Madrid
Turkey to India
Shanghai to Osaka Ferry https://www.shanghai-ferry.co.jp/english/unkou.htm
Tokyo to Los Angeles

Stolen November Days

I'm stealing a lot of extra scenes in a November that doesn't usually encourage riding up here in the frozen north...

The end is nigh

Last year the bike was hibernating by the end of October.  This year we're getting a run of warm weather that has me still out on two wheels more than halfway through November.  We're supposed to get snow accumulation this weekend, which means sand and salt on the roads.  When that happens I'll hang up my helmet.  I'd end up spending as much time cleaning the bike as I did riding it once the salt goes down.

First ride on a newly safetied and
roadworthy Concours last March

This season started in mid-March once the roads were dry and the salt and sand cleaned off by a couple of rains.  The snow as still thick on the shoulders though.  This late finish to the year means only about four months of down time before I can get out there again.

Today I'm down to Guelph for periodontal work.  I figured I'd be stuck in a car, but it's a dozen degrees and partially sunny out there!  One last ride then!



In the meantime, we've been commuting on two wheels every change we get...

Riding in the land of ice and snow

 Frosts in the morning.  It was -3°C when the Kawasaki first coughed to life.

There is no bad weather, only bad clothes.  With big gloves and a lined leather jacket, the five mile ride to work is still quite doable.

I might get off the bike with cold fingers, but there is still no better way to commute in the morning.

Soon enough the snows will come and salt will make the roads a caged misery.  In the meantime...

Big black S&M gloves!  That's alotta leather!

Sense of Satisfaction!

After all the Maker talk this week at a conference I attended, I was keen to spend some quality time in the garage working on the 35 year old XS1100 basket case.  It's easier to walk the walk than talk the talk when it comes to Making.  Unlike the education approach infused with collaboration for your own good, I did it the way I always do: alone in a garage.  It's wonderfully cathartic to get something broken working again, and meditative when I don't have to explain everything I'm doing.

How do you get a 35 year old motorcycle left outside for several years unattended working again?  Very carefully!

The front brakes were seized, the throttle body was seized, the rear brake is still seized, as are other things I haven't found yet.  Motorcycles aren't like cars, when they're left in the world they don't have a shell protecting the mechanicals from the weather.  Restoring a car tends to be more mechanically salvageable as a result.

Yamaha XS1100 Mikuni Carburetor by timking17 on Sketchfab

I ended up having to take the end carburetor off the rack of four Mikunis that line the back of the Yamaha engine.  It was the most carboned up and filthy one, and the grit had seized the throttle body rod.  A complete dismantle, cleaning and reinstall has the carb working again (before this you couldn't move the throttle body without great effort and a nasty creaking sound...

It took a couple of hours to break it down, find the problem and rebuild it.

It was pretty before, but the Mikunis are even prettier now that they work!