Moments From My First Season On Two Wheels

From a new (to me) Ninja with 8100 miles  to 11,410 miles by the end of my first season, April to October, 3,310 miles, ... 5296kms.

2013: Out and about on 2 wheels!

The first time I looked at that map I wondered why I didn't go further afield, but I did make some longer sorties.  Next year I'll make a point of doing some overnight riding trips

Here are some moments from my first year in the saddle:

The first time I changed gears without consciously thinking about it was probably about a month into riding.  I then immediately became aware of the fact that I'd just changed gears without thinking it all through and had to focus on the road again before I rode off it.

In that first month I kept pushing further away from home.  The first time I went on our local (rural) highway I had a lot on my mind.  I found a left hand turn and got myself into the turning lane.  In a gap in traffic I began to make the turn and gave it (way) too much throttle, my first wheelie while turning left on my first ride on a highway!  I leaned into the bike and got the front wheel down in time to make the corner.  The kid in the Cavalier waiting to pull on to the highway got all excited by my wheelie and did a huge burnout onto the highway.  I had to laugh, I'd scared the shit out of myself and he thought I was showing off.

First time I was on a major (ie: limited access) highway, I'm riding up toward Waterloo through Kitchener and the new slab of tarmac I'm on begins to taper out.  It's the kind of thing you wouldn't think twice about in a car, but I couldn't cut across this.  The new pavement began to peter out and I ended up slipping three inches down onto the old pavement, sideways, doing about 90km/hr.  The clench factor was high, it felt like the bike just fell out from under me.  That was the first time I really realized how little is around me on a bike, and the first time I had trouble understanding what it was doing under me.

The lightning is to remind 348
drivers that it's fast... for a car

Early on I was out on local back roads getting used to the Ninja.  I pulled up to a light and a red Ferrari 348 pulled up next to me with a very smug looking boomer at the wheel.  He started blipping the throttle.  I'd never really even gone into the top half of the rev range on the Ninja, I only knew what it might be capable of from stories online.  The light changed and I twisted the throttle harder than I ever had before (which probably meant about 75% rather than 50%).  I didn't know where the Ferrari was but it wasn't next to me.  The Ninja is quick in the lower part of its rev range, more than able to stay ahead of the traffic around it.  In the upper half of its rev range something entirely different happens... it lunges.  I made a clean shift into second even while registering astonishment at what my little 649cc parallel twin could do when that second cam came on.  Second gear lasted for about a second before I had to do it again for third.  I eased off and sat up to look over my shoulder, the Ferrari was many car lengths back.  My little thirty five hundred dollar mid-sized Ninja could eat Ferraris for breakfast.  I've owned some fast cars in my time, this thing was something else entirely.

On the long ride back from Bobcaygeon I was within half an hour of home when I was trundling along behind a greige (grey/beige - featureless and soulless) mini-van at 75km/hr.  By this point I'm getting comfortable on the bike and have a sense of how it can pass and brake (astonishingly well!).  In my helmet I suddenly ask myself, "why are you following this clown?  If you had bought a Lamborghini would you be driving along in the row behind this P.O.S.?"  I passed the mini-van on the next broken line (easily) and, in that moment, adjusted my riding style to suit the vehicle I'm on.  Everything is still by the book (indicators, shoulder checks, passing on broken lines), but I don't wait for BDCs to begin paying attention to what they are doing, I just put them behind me.

Speaking of which, I'm riding in Guelph in the summer on the Hanlon highway and the old guy in a Toyota appliance (it was even the same colour as a fridge) pulls right into where I was, no indicator, no shoulder check... at least he wasn't on a phone.  I had the radar on and could see what he was going to do before he did it.  Being on a bike I was able to brake and swing over onto the curb in order to avoid getting mashed; my first experience of being invisible on a bike.  I had to look down to find the horn, I'd never used it before.  He studiously ignored me.  What is it about people in cars not feeling responsible for what they are doing?

The commute to Milton and back was a big part of my first season.  It began after I got back from my longest trip to Bobcaygeon over the Canada Day weekend.  I quickly had to get rain gear sorted out after deciding to take the bike every day rain or shine.  In those three weeks I rode 400 series highways, big city streets and miles of country road.  Temperatures ranged from 8 degree fog to 36 degree sun beating down.

One morning I left torrential rain and rode the whole way through fog, rain and spray.  Another day coming home the sky in front of me turned green and purple, real end of the world stuff.  I stopped and got the rain gear on and rode into what felt like a solid curtain of water only thirty seconds later.  As the wind came up and the rain went sideways I remember thinking, "OK, if you see a funnel cloud just hang on to the bike, you're heavier with it than without."  The bike's narrow tires cut down to the pavement even as the wind was trying to send me into the trees.  I eventually rode out of that darkness and decided that if a bike can track through that it can handle any rain.  The commute also contained the first time I didn't think twice about riding through a busy city.  Riding day in and day out on the bike gets you comfortable with it quickly.

My first tentative steps onto the 401 (staying in the inside lane for the whole 13kms) quickly turned into opening up the bike and syncing with traffic in the left hand lane.  I think a lot of that had to do with coming to trust what the bike can do, and what it can do is quite astonishing.

River Road out of Horning's Mills

My last big fall ride before the end of the season had me doing one of my biggest rides down some of the best roads within a hundred kilometres of where I live.  The bike was humming, it was cold until the sun came out, then it was perfect.  A last perfect ride before the snow fell.

It was a great first season, and I got some miles in and really enjoyed the bike.  I'm now torn whether to get rid of it an get something else, or stick with it for another season.  Either way, first time we see the sun and some clear pavement again I'll be out.

My Ninja and I in the fall on the Forks of the Credit

Motorcycle Things: Winter '17 Wishlist

A motorcycle wish list circa 2017:

Jon Campbell on Google+ shared updated colours on the Aerostich line of motorcycle clothing.  I've always loved the look of Aerostich kit.  Unfortunately, a Roadcrafter suit costs more than most of the motorcycles I've purchased.  

One of these days I'll get the coin together and spring for an Aerostich one piece suit.  By all accounts it'll be the last time I need to.  

They have lots of custom options so I should be able to find a long in the body, regular inseam that fits me properly.  With colour choices aplenty, making an original looking suit that fits is an ongoing pastime.

***

Keeping with the orange kit theme, I'm also wishing for a go with the updated Desmo RO32 transformable helmet.  Quieter, more comfortable and more spacious, it's my go-to Desmo helmet evolved.  Short of buying one from overseas untried, I'm stuck.  If we end up in France this summer, a trip to Roof might be in the cards through.

***

With the Tiger's winter maintenance done, I'm hoping to return focus to the Concours ZG1000 Fury streetfighter I've got half finished.  

On the to-do list is getting a rear light and indicators.  I'd ordered them through Amazon but the dodgy Chinese company that makes them never evidently sent it, though they charged me for it.  The Amazon marketplace seems to be increasingly filled with overseas companies that have a very slow delivery time, assuming they ship at all.

It'd be nice to get this running smoothly by the summer for some blistering solo rides where I finally get to find out what those new Michelin tires feel like.  In a perfect world I'd enjoy the summer on it, ride it to the Distinguished Gentleman's Ride in Toronto next September where someone offers to buy it for what it cost me to make it.  I could then role that over into next winter's project.

***

A couple of road trips this summer would be nice.  I've had a trip around Lake Superior in mind for a while now.  It's about 2000kms around from Manitoulin Island and back again, and another couple of hundred kilometres and a ferry ride home.

Launching from Little Current at the north end of Manitoulin, I'd go the Ontario side first just to avoid the misery that is the border crossing into Michigan at The Sault.  After sitting at that for almost two hours last year, I'll go backwards around Superior just to avoid it.  Doing 350km/days on average, we'd get around Superior in about six days.  If we wanted a day off, we could push for a couple of days to get a day of rest.  A day up to Manitoulin and a day back at the end means eight days on the road.


A trip down the Appalachians to see the full solar eclipse this summer is also on the short list.  Doing this one for ten days means we'd have a couple of days to explore areas on the way down and on the way back instead of making miles every day.

From just over the border in New York state all the way down to Tennessee, this is motorcycle nirvana with mile after mile of twisting mountain roads.

***

Racer5 is running their introduction to track riding again this year.  A May long weekend getting familiar with the racing dynamics of a motorcycle would be pretty wicked.  By the end of the course I'd be qualified to race.  The next step would be getting myself into the VRRA for some vintage racing.

***

I never get bored of imagining throwing a few grand down on some motorcycle racing gear.  My two pairs of Alpinestar boots have been excellent, so I'd probably base a lot of the racing gear on what they offer.  I'd read reviews of the Handroid Knox racing gloves and they sound totally next level.  An Arai helmet has always been a long term, top end motorcycle helmet wishlist item, and they have a nice Isle of Man special out this year.

***

A track-day specialist bike would also be nice to have tucked away, only to be trailered to the track for hard work.   This '99 CBR600 F4 is well cared for and going for about three grand.   I'd strip it down to bare essentials and put a carbon single seat cowling on the back.  After wearing out the tires on it, I'd go to racing tires and continue to evolve the bike into a track specialist.

***

Guy Martin did a race in his Ford Transit van last year where he averaged well over 100mph for an extended length of time.  I wouldn't spend much time in one the other side of 100mph, but having a van would sure be handy.  From transporting my own bikes out of the snow for a cheap ride in the winter, to taking the race bike to the track, having a bike transport system would be mega.  With taxes, a new one nicely spec-ed out is just north of fifty thousand of your finest Canadian dollars.

***

Some top shelf gear, getting race ready and having the custom Kawasaki on the road... if I came into cash in 2017, that's what I'd be spending it on.

Pigeon Forge Motorcycle Base Camp Trip Planning

The Smokey Mountains are a motorcycle Mecca for a reason.

Using a combination of motorcycleroads.com and Furkot.com I've been planning day trips from Pigeon Forge, which seems a sensible place to explore the Smokey Mountains from.  The process can serve as escapism on a foggy, freezing drizzle Boxing Day, or it could be  pre-planning for an inevitable trip.

I've variously daydreamed about driving the Tiger down in a van over the Christmas break to New Orleans and Key West, as well as riding down to The Tail of the Dragon next August for a complete solar eclipse.  There are a lot of good reasons to figure out possible rides for when I'm eventually in the area.

Pigeon Forge is located just south east of Knoxville and offers a great launching point into the Smokey Mountains.  The area around there is covered in desirable roads:



The only trick with a winter trip is changeable weather.  It looks like next week in Pigeon Forge would have been a bit challenging:



It's a roll of the dice going south in the winter but the summer's a sure thing.  Maybe I'll find myself in the Smokey Mountains next summer when the moon hides the sun.

200 KM East Loop

230KM Pigeon Forge low land loop

Pigeon Forge 300km South Smokey Mtn loop

240 KM loopback Dragon's Tail

Reading The Trails

We loaded up our wee mini-van and spent 48 hours out in the woods near Bobcaygeon.  Into the back I packed some helmets and the tiny Yamaha.

The cottage we were at is an ideal base for off-roading.  It's at the end of a long gravel fire road deep in the woods, and it's surrounded by off road snowmobile trails.  You couldn't ask for a better place to practice the art of riding off road on two wheels.

I really need to get my mits on an off road bike so I can go on those trails with my boy on his bike.

While I was lamenting my lack of a dual sport I went out on one of the ATVs and rode some trails with an eye for how a bike might make its way through three foot deep puddles and up rocky washed out trails.  The ATV is like a tank, bashing its way through with brute force and massive wheels.  You've got no chance of falling off and you pretty much knock your way through on a hugely over-square, balanced machine.  A bike would be like a scalpel after using a butcher's cleaver.


The inherent lack of balance on a bike means pounding through those massive puddles would be a tricky proposition.  I can't wait to try it.  Since I started riding I've realized how many different ways there are to learn motorcycle dynamics, and off-roading will push those boundaries far more cheaply than track racing might.

I'm hoping to nail down an off road focused dual sport and some kit in the next couple of weeks and then I intend to spend a lot of time up on the trails around the cottage, falling off a lot and learning things I'd never get to learn on the road.

A lovely little Yamaha came up in Orangeville for sale.  I'm hoping it's still available.  It's a light weight, air cooled XT350, the grandchild of the venerable XT500.  It'd also look good with with my son's PW80.  Just two guys out on their Yamahas.

Here's hoping it's still waiting for me.

Bike Bucket List

Tim's bike-hole, once a storage place for unused furniture,
now an insulated work space with two Kawis in it.

Season 1 ended with me getting my license, my first bike and getting over 5000kms of riding in, including a full month of long commutes.  The original bike bucket list included getting the license and first bike.

As season two began I was looking to expand.  Bike bucket list 2.0:

• build a garage worthy of the name (almost done!)
• have a bike holiday on some less-Ontario-ish roads (done!)
• ride more different bikes, done and done! (and that second one even got my wife scooter curious)
• work on my bike-craft (done & ongoing!)
• buy a fixer-upper (done!)
• do an overnight bike trip (didn't manage it... but the season isn't over yet!)

Here's the bucket-list 3.0.  Some of these might take a bit longer to complete:

• build a bike from scratch
• do the double ton on a bike:  200mph (I just read BIKE's Hayabusa story)
• do a track day
• get a race license
• compete in a season (with a van!)
• do a Viking Biking tour
• do one lap of Japan
• around the world with Max
• coast to coast to coast in Canada
• publish an article in a moto-magazine
• publish photography in a moto-magazine
• do the 1000 mile Iron Butt
• attend a MotoGP race weekend
• expand the stable:
• a bike to dance with one on one (light, single seater, lower displacement)
• a distance bike (get the Concours up to snuff)
• live the 3-wheel dream, get an all-purpose outfit for Max & I
• take Max to an off road school
• then do an off road riding school with him
• get off-road bikes for the cottage
• attend the Intermot Bike show in Cologne, Germany in October.

Some of these are well beyond what I can pull off at the moment, but you never know when circumstances might change.  Besides, if you're gonna dream, might as well dream big!  If I'm going to do that, retiring into my own little shop would be awesome!  Custom mechanical, digital parts fabrication and finishing!

Money To Burn Wish List

Another wish list... we were talking about what we'd do with a lotto win while camping last weekend.  I'd be aiming to expand into road racing and off road riding.  Here's what my cost-no-object-moto-summer would look like.

LOGISTICS

I've been thinking about a Ford Transit van, Guy Martin style, but now I'm thinking about a trailer.  Stealth Trailers make an aluminium bike trailer that is pretty awesome.  It weighs about 1200lbs and carries another 1700lbs, so something with a three thousand pound towing capacity would manage it.  Fortunately, the Jeep Cherokee I'm currently fixated on can tow 4500lbs.


Trailer: ~$6000
Jeep:    ~$36500
----------------------
~$42,500

I'd also pick up a custom pop up tent with Mechanical Sympathy printed on it.  They look like they go for about a thousand bucks plus whatever the custom screening costs.  Setup off the back of the trailer I'd have an instant pit stand.


Tent ~$1500

ROAD RACING

Track Bike (newer)

Kawasaki ZX-6R if I wanted to keep it Kawi as I have thus far.

Other short listed bikes would be the Honda CBR600RR or the Triumph Daytona 675R.  All three are mid-displacement bikes that would allow for an engrossing track experience.  A litre bike is a bit much for track day riding, unless you're either an ex-professional or compensating for something.

Price range (new) : $12,500 (Honda) to $14,500 (Triumph) with the Kawi in between.  I'd pick the one that fits best.  Rather than a new one I'd probably find a used one and then strip it down to race.  I could find a lightly used one of these for about six grand and spend another four to get it race ready.
~$10,000

Track Training & Track Days

 Racer5: The three day intro-weekend would do the trick giving me the basics on a rented Honda.

$1000

Getting in some laps at Grand Bend...
$100 a pop x 5 a summer = $500

Pro6 Cycle track days at Calabogie
$350 a pop x3 a summer (x2 meet up with Jason) = $2100

Vintage Racer

Join the VRRA and take their racing school.
$475

A mid-80s Honda Interceptor would be my classic bike of choice.  I couldn't care less how competitive it might be, this is an exercise in nostalgia.

You can find well kept ones for a couple of thousand dollars online.  Converting it to a race bike would cost that much again.
$4000

Road racing ain't cheap...

--------------------------
~$18,000 + race costs (tires, etc)

OFF ROAD

Suzuki DR-Z400S x2
Build out a couple of Suzukis, do some training, complete some multi-day enduro events.
~$7000 each + maintenance and upgrades

Join OFTR
~$65

Trail Tours Dual Sport Training
$250

Smart Adventures All Day Training
$260

$2000 competition budget
--------------
$16,575


Forty-two, eighteen and sixteen and a half thousand (~$76k) and I'd be having a very busy summer expanding my motorbiking repertoire both on and off road.  That's only a two thirds of the price of a new Range Rover!  What a deal!

Riding Through an Oil Painting

 After a long day at work I found myself watching the sky change colours and jumped on the Tiger for a ride down the river.  It felt like riding through a Van Gogh...

All photos taken with a Ricoh 360 camera mounted on the windshield, autofiring every 8 seconds.

West Montrose Covered Bridge: one of these times I'm going to ride through and find myself in 1881!

Photos are in reverse chronological order.  Sunset was at 8:30pm - I was on the road from about 8:10 to 8:50pm.

If you want a breakdown of how to get on-bike 360 photos like this, check THIS out!  If you really want to digitally flex, you can create a 360 'tiny planet' stop motion film out of this kind of photography:

Related Links:  How to capture 360-degree photos while riding your motorbike (Adventure Bike Rider Magazine)

Brake System Maintenance on a C14 Kawasaki Concours

 I'm busy in the garage these days with the on-going 50 year old Triumph Bonneville restoration project.  It's a big project that will take some time to sort out, but it's -20°C outside with snow squall warnings of 20cm of snow coming, which means it's also regular maintenance time on the two running bikes in the stable.

Tiger's back in hibernation after last week's sprockets & chain maintenance, waiting for a break in another never-ending winter of COVID for a chance to ride.

Last week the Tiger got new chain and sprockets.  I hadn't done the sprockets on it since getting it over 5 years and 40k ago, so I figured it was time when I noticed the latest chain had stretch in it that made it impossible to set the sag properly.  This week it's all about the Concours.

I got the Connie last spring in the middle of the second lockdown.  My son and I rented a van and drove down to The Beaches in Toronto and picked it up from its second owner who hadn't been riding it for several years.  It's a very low mileage bike (under 30k when I picked it up), but I like to cover all the basic maintenance so I can set a 'zero point' for future work.

As you would expect from Kawasaki Heavy Industries, the brakes on the GTR1400/C14 Concours are superbly engineered Nissin calipers.  I'd picked up the pads last summer but they hung on the wall until now because I was putting miles on the thing.  I did find the brakes were squeaking a bit, suggesting the calipers weren't releasing properly - something that can happen in a bike that sits for several seasons.  Like I said before, I don't like riding a bike where I'm not sure of the maintenance, especially on brakes, so it was due.

Doing the pads on the Concours is remarkably easy.  You don't need to remove any body panels and everything is very accessible.  Undo the pin that holds the pads and spring that holds them in and then everything comes apart in your hands.  The pins were rough and there was some odd gunk stuck in the front right caliper.  I cleaned everything up and lubed it and then slotted the new pads into place with the now lubed pins (I think it's a #5 hex head that does the trick).  All very logical.

If you're looking for torque settings for the
brakes on a Kawasaki GTR1400/Concours
C14, here they are.

The rears are just as easy and a similar design with the same pin and caliper bolt sizes (everything is hex metric).  The back was as mucky as the front and I went to lengths to clean up the pressurized caliper slider and lube the pins and areas where the pads move.  The action immediately felt better afterwards.

Last spring when I got the bike I had to sort out a leak in the hydraulic clutch which resulted in entirely new DOT 4 brake fluid (what the Connie uses in both clutch and brakes).  Changing up your brake fluid removes impurities and moisture that can eventually cause real corrosion headaches in your brake system, so after doing the pads I changed up the brakes fluid on both front and rear systems.  The only fluid change left now on the Concours is the antifreeze.  I'll do that at the end of next season.  When I tested it the fluid it was still bright green, looked new and showed good temperature range.

Getting all the air out of the hydraulic clutch so that it felt tight and had positive action was a real pain in the ass last spring.  The good new is that this air-line powered vacuum system did the trick then (it's not crazy expensive) and takes the headache out of bleeding anything with steady, controllable suction.

In the case of the brake system, I set up the vacuum bleeder and then kept adding fluid in the reservoir at the top until it came out clear (the used stuff was darker and cloudier - it looked almost like water once the new stuff made an appearance.

Just a note:  don't keep brake fluid laying around open.  It collects moisture and goes off pretty quickly.  As with all brake fluid changes, I opened the bottle and then immediately used it this time.

The front brakes took less than 10 minutes to completely bleed of old fluid and the rears even less.  If you're doing your own brake/hydraulic fluid maintenance with any kind of regularity, let that hand-pump go and get one of these things (assuming you have an air compressor of course).

With the brakes sorted on the Concours and the sprockets and chain on the Tiger, both are waiting for a break in the weather for a cheeky winter ride to kick off the 2022 season.  As long as I'm not trying to navigate ice on the road, I'm good to go.  An above zero day and some dry pavement is all I need

Now that the regular movers (I was going to call them new but the Tiger is almost 20 years old and the Connie turned ten last year) are sorted out maintenance wise, it's back to the old Bonneville project.  Next up I'm rebuilding the two Amal carbs, then it's rebuilding the ignition system and then (hopefully) hearing the old thing bark for the first time in decades.

Sometimes the Bonneville can feel like it's too big to manage, it needs so much, but with two other working machines I'm never going to be angry with it not being ready, though I would love to have it running in time for The Distinguished Gentleman's Ride on May 22nd.  A '71 Bonneville with some early 70s retro style would be a blast.