March Break

The dream March Break trip? Load the Tiger into the back of the trusty Ford Transit Van and head south to a place where the weather won't suck all week; it will here. While snow is flying during the most pointless school break in Ontario, I'd be driving one thousand kilometres south to Virginia to chase the waterfalls my cousin suggested in January. 

The drive down has us doing an eleven hour slog to Roanoke, Virginia on some back roads through the Allegheny Forest and down through the Adirondacks into the Appalachian Mountains before finally landing at the Hampton Inn off Interstate 81 just outside of Roanoke.

Once in Roanoke we'd put our feet up for the night and then take one of three routes over the next three days.

The weather is lovely: mid-high teens all week, rather than the zero degree snow we've got going on here all week.

Yeah, it'd be cool, but it wouldn't be painful, and the roads would be salt free and winding through the mountains.  To top it all off those waterfalls would be plump from all the run off.  It'd be a photography and media making dream.  The mountains would be blooming in early spring and I'd have the cameras on hand to catch that moment on two wheels.

Each day we'd loop back to Roanoke before heading out in a different direction the next day.  Thanks to all the mountain roads there would be virtually no overlap between loops with each offering unique sites.  Having the same base camp also means the bike will be light on gear and ready to explore the mountains.

Leaving on a Monday morning, we'd be in Roanoke Monday night and ready for a Tuesday-Wednesday-Thursday of motorcycle riding from waterfall to waterfall before making the ride back north into the snow and darkness on Friday.

It's not a crazy expensive week.  Under five hundred bucks for hotel then gas and food money.  Two long distance highway days would be all about gas and quick food stops. $200 would feed the van, another $60 would cover the bike.  Five days of food on the road could probably be done for $250.  All in that's a thousand dollar holiday.   The three days in Virginia would be all about slow lunches and dinners and riding between photogenic waterfalls.

Of course, the ongoing issue is not having the bike delivery system.  Mid-winter isn't the worst time to be a motorcyclist in Canada.  The worst time is the end of the off season when the snow is fading but the winter weather hangs on week after week, prolonging the caged life.

Sourcing Parts and Kawasaki Master Brake Cylinders

The rear brake light I ordered on Amazon in December decided to show up today.   I'm going to pass it on to Jeff's BMW cafe racer project and I think I'm done with four month delivery times from Amazon.  Time to source my parts elsewhere I think.  I'm curious to see how soon the rear brake light I got instead from eBay takes.  I have a feeling it's going to make the Amazon Marketplace delivery times look sketchy.

Meanwhile, a coolant overflow tank and master brake cylinder kit arrived for the Concours in a timely fashion from Fortnine.  I wish they'd start stocking customization pieces like those all in one LED lighting systems.

The tank looks like it'll fit nicely on the battery case.  It isn't as big as the stock one, but the stock one isn't that big anyway.  I've routed the coolant overflow tube and it fits nicely down the spine of the bike.  Where it's placed means the overflow pipe can stick out the side and not dump in the path of the rear tire.

The master brake cylinder kit took a bit of work to get into.  Getting it off the bike was easy enough, but getting the compression ring out took some fiddling.  I've replaced the rubbers on the cylinder and I'm ready to put it back together again, but the kit came with 2 copper rings that don't seem to be on the original, so I'm going to figure out where they go before I reassemble.

Brake handle and electronic switch removal was straightforward.  The only tricky bit was the snap ring that holds in the master cylinder.  Compressing the cylinder while getting a pair of compression pliers in there
to squeeze the ring into the groove on the cylinder is swear worthy.

The old outer gasket was in pieces before I even started pulling it out.  Rubbers don't typically last 24 years.
Fancy people pay for that kinda patina - mine comes virtue of the bike being 23 years old and Canadian.

The old gaskets and spring on the cylinder

New gaskets and springs ready to install - as soon as I figure out where the copper rings go.

I don't see copper rings on there anywhere.  I'm still not sure why the
All Balls Racing master cylinder kit has them, but have them it does.

Triumph Tiger Motorcycle Digital Art

Mechanical Satisfaction

The Concours carburetors weren't snapping back when I released the throttle. Everything worked, but they wouldn't close on their own as they should. I removed the carbs, reset the butterflies so they all closed properly and replaced a bent spring. With everything lubed up and working freely, I reinstalled the carbs and ran the throttle cables over and along the top of the frame rather than around the side, trying to have the throttle cables address the carbs as perpendicularly as possible.  With the cables properly tightened, the carbs snap shut when the throttle is released, as they should.

My to-do list on the Concours is down to a rebuild of the master break cylinder.  The part isn't expensive.  I'd purchased a set and did it on the Yamaha XS1100 I had before, so the Concours should be pretty straightforward.

I also have to sort out a rear light and body panels for the back end.  I'd asked if they could be done at school in the metal shop, but asking for work to get done there seems to result in it disappearing down a hole.  I'd rather do the work myself anyway.  The plan is to form the panels for the back end and find a rear brake light with indicators built in and wire it in to the back end.

The last job is going to be reworking the radiator reservoir to somewhere around the battery box.  With that done, in theory, the Connie will be ready to begin test riding the kinks out.

Follow-up:  rear brake lights were found on ebay - let's hope they arrive this time.

If they do then ebay is a more dependable shipper than the Amazon Marketplace, which seems pretty bizarre, but there you are.

Really Annoying: Talent Show - Funny 2017 Kia Forte TV Commercial

I'd describe this as not funny at all.  This ad is all over TV at the moment and it makes me grind my teeth every time I see it.  KIA isn't the only company pushing the "don't worry if you're useless, we've made a car that puts you on the road anyway!" sub-text.

From a motorcyclist's perspective, especially one in you-can't-lane-split Ontario where I'm expected to wait in a lane as clueless drivers imagining they are on reality TV approach me at killing speed from behind, do these systems work on something as small as a motorbike?  This article by Consumer Reports suggests that pedestrian aware systems are distinct from vehicle aware systems.  "...Some newer systems can also detect bicyclists."  That's heart warming.

How long will it be before people, already willing to take my life in their incompetent hands while they take selfies and answer texts that just can't wait, figure that they don't need to be competent at driving at all?  We're already close.

I haven't seen anything in motorcycle media about this, but this is turning into a life or death situation for people on two wheels.  Someone with more resources than I needs to see just how big the blind spots are on these systems and then tell motorcyclists how best to be seen by them.  Our lives increasingly depend on it.

"Motorcycles are the biggest problem, with systems detecting them a full 26% later than other vehicle types, and this with motorcycles already being the hardest motor vehicles on the road to see..."  http://www.carbuzz.com/news/2014/12/12/AAA-Issues-Warning-Against-Fully-Trusting-Collision-Avoidance-Systems-After-Study-Finds-Serious-Flaws-7724196/