Perseverance & Patience

Steady on, it's not that bad.  I shall persevere!

The never ending tale of Concours carburetors continues.  My most recent attempt was to check the fuel amounts in each bowl and then reinstall and test (I'm getting very quick at this).

Once again the old Connie coughs and backfires and dies on throttle application.  The removals and re-installations have upset the old connectors between the carbs, which have developed a gas leak, so the whole thing came off (again) and is now apart on the work bench (again).


I contacted the local Kawasaki dealer for

The plastic bits that connect the carbs have
become brittle and leaky.

parts last weekend, but they've been radio silent.  The parts I need were easy enough to find, but maybe 22 year old carb bits aren't sexy enough to warrant a timely reply.  Maybe I should have ordered them online, in spite of a number of magazines lamenting people's lack of support for local motorcycle dealers.  Had I ordered them online they'd probably have been here by now.  Instead I'm left wondering if I can even get these parts.

The goal now is to take each carb apart, double check float depths and ensure all the internal jets and such are properly installed, then it'll all go back together again with new connecting pieces and go back on the bike (again).  With any luck I'll get some sort of clue that I'm moving in the right direction.  That's been the most frustrating part of this process.  I make changes and there is no change when I fire it up.  Whatever the problem is, I haven't come close to touching it yet.  At least a fuel leak is an obvious and easy fix.

Any day now...

Ninja Blues

This has been many weeks in the making.  I began de-blacking the '07 Kawasaki Ninja 650r (my first bike) in May.  Last weekend I took another big run at it.  This weekend I finally got it to the point where I can live with it.  I think I'll do the rest once the riding season is over in Canada, but in the meantime, I've got a Ninja that looks a lot better than it did.


I've blued the front end and the fairings down to the air intake.  I'll eventually do the entire bike, but those fairing are big and it takes a long time to strip the flat black off them (I'm using graffiti remover in small areas at a time).

At the moment the tank, front end and rear end are completely covered, but the fairings are only half blue.  I've faded the metallic blue into the existing flat black and it doesn't look half bad.

The more interesting bit is the frame.  I wanted a burnt orange, but every orange on the shelf was a pylon orange.  I was all set to mix a yellow and dark red to a burnt orange, but the mixing didn't go well, it ended up looking an angry pink.  It eventually settled into a darker orange, but I still wasn't happy with it, it looked muddy..


I had greater success getting the orange I wanted by doing a base coat of pylon orange spray with a cover of candy apple red metallic.  The result is the sparkling burnt orange I was looking for.  The plastic drop sheets and cardboard I was using to shield the rest of the bike looked like they'd come out of a volcano when I was done.  I'm not entirely thrilled with the finish, but now that I have some sense of how to mix the colours (orange based, mix in light layers of red while the orange is still wet), I'm ready to experiment more.

Orange base, light candy apple
red metallic over top
while still wet

I think I'll eventually make the entire frame that burnt metallic orange. It's also rust paint, so it'll seal up the frame nicely.


I got a different gloss this time, thinking they are all pretty much the same,
they aren't.

You want the one on the
right; AWESOME clear coat

The ultra-cover 2x (the blue and white can), gives you what looks like a factory clear coat finish.  The lacquer makes a foggy mess.  I'll only use the Ultra Cover in
future applications.
















The angry young man's flat black Ninja:

A truer, bluer Ninja:

One heck of a lot more visible, and it sparkles in the sun.

When I get the fairings finally done I'll giver her a real photo shoot.




















I'm now thinking about Kanji-ing up the front end... Ninja Kingfisher...