Showing posts sorted by relevance for query Haliburton. Sort by date Show all posts
Showing posts sorted by relevance for query Haliburton. Sort by date Show all posts

Thursday, 25 May 2017

Astonishing Haliburton & Algonquin Roads, in the rain, with a fever!

Almost three hours into an interminable visit to the local walk-in clinic last Friday night I'm told that I'm over a hundred degrees, in terrible shape, but it's just a virus and I have to suffer through it.  I should go home, rest and feel better, except I can't because this is the Haliburton Birthday Weekend.  We're on the hook for a hotel that won't cancel a long weekend booking, even under a doctor's advice.

I go home, sleep poorly and take lots of pills.  The next morning I'm shaky and either sweating or freezing cold, so a perfect day to go for a three hundred plus kilometer ride across the province.  The original plan was to leave early and take my time picking off must-ride roads in the south end of the Haliburton Highlands before finally arriving at our hotel near the town of Haliburton.  That didn't happen.  Instead, I followed my wife and son in the car on the shortest possible route.  We stopped frequently and a sunny, relatively warm day meant it wasn't as miserable as it could have been.  We all fell into our room after five o'clock and collapsed.

I could have driven up in the car, but the whole point of the weekend was to ride the Highlands, so bike it was.  Sunday morning dawned overcast with heavy clouds.  The rain held off until I saddled up after a late but brilliant breakfast at the Mill Pond in Canarvon.  I was doped up on fever and flu medication and as good as I was going to get.  The plan was to wind up Highway 35 to 60 and then into Algonquin Park.  If the weather was atrocious or I fell apart physically I could always turn around, but if I'm going to do it, I'm going to do it; turning around isn't in my nature.

I'd originally planned to stop often and use the new camera, but needs must and I was on a mission to complete that fucking loop.  The backup plan was to use the Ricoh Theta 360 camera on the fly.  It's a push button affair that is easier to use than a satnav.  Hit power, press the shutter button, put it away.  The tank bag that came with the Tiger has a handy little pouch at the front that fits the camera perfectly.  I'd never tried using the Ricoh by hand like that before, but it seemed like a good idea when my time on task was at a premium.  Since it takes in everything at once you don't need to worry about aiming or focusing it either.


Heading north out of Canarvon the rain closed in immediately.   On the upside, it was chasing away a lot of the holiday traffic, though this is Canada, so what you're looking at above was pretty typical for this ride... on a long weekend.


Highway 35 dodges and weaves around lakes and Canadian shield as it works its way up to meet 60.  If you're not blasting through the dynamited, rocky skeleton of Canadian Shield, you're winding your way around muskeg, never ending trees or scenic lake shores.  And it does all of this while being a bendy roller-coaster of a road.

The gas station in Canarvon was shut down, so I suddenly found myself running onto empty as I powered north into the big Canadian empty.  Fortunately, I came across a Shell station at the intersection with 60 and filled up.


By that point the rain was more steady than not, so I stepped into the rain suit and wove my way into Algonquin Park.  Suddenly the roads were full of people with GTA tagged SUVs all driving around aimlessly looking confounded by all the trees.  Throughout the entire loop Algonquin was the only time I was stuck in traffic.  I pulled in to the Visitor's Centre and had a coffee, stretched my legs and soaked up the ambience.  The lady at the counter was nice enough to give me ten cents off on my coffee because I didn't have change.


Fifteen minutes of crying babies and screaming kids and I was longing for the wind and silence of the road again.  The Visitor's Centre was near the half way point in the loop, and with a coffee in me (my first caffeine in days) I was ready to go all the way.  The weather was occasional spotty rain, so it wasn't as terrible as it could have been.  I was warm and dry in the rain suit and the drugs had beaten back the fever, so on I went.


I'd never been out the East Gate though I've been to Algonquin since I was a relatively new, ten year old immigrant to Canada.  It feels older than the West Gate, looking more like a toll booth than an art deco entrance to one of the biggest and most famous parks in the country.  Once out of the park traffic evaporated and I was once again alone in the woods.   I'd originally planned to head all the way over to the 523 for a wiggly ride south, but 127 cut off some kilometers and I was already feeling the hours in the saddle.  It was an empty trek down the 127 to Maynooth, albeit with some pretty scenery.


The rain came and went and I got so used to riding on twisty roads that it became second nature.  What would have been a ride to road where I live was just another road in Haliburton.  The Tiger spent very little time on the crown of its new Michelins.  I pulled up in Maynooth for a stretch before starting the final leg of the loop back over to Haliburton Village.


Strangely, and for the first time since the trip began, the roads dried up and the sun started poking through.  Up until now I'd been on local highways; fast, sweeping roads that, while curvy, were designed for higher speeds.  Out of Maynooth I took Peterson Road and got to enjoy my first local road with lots of technical, tight radius turns and elevation changes.  Peterson and Elephant Lake Roads were dry and a lovely change from the wet highways I'd been on before.

On a short straight between the twists on Peterson Road out of Maynooth.
Those 41 winding kilometres to
Pusey flash past in no time!
The local traffic was apparently very familiar with bikers making time through the area with several trucks pulling over and waving me through; some country hospitality on a long ride.  

The pavement continued to dry and the Tiger got friskier and friskier as I rode on to Pusey and then Wilberforce.  I was lucky to see another vehicle in either direction on this busy long weekend - just my kind of road trip.  No matter how sick I'm feeling there is nothing like a winding road and a motorbike to put a spring in my step.  For the first time on this ride I wasn't carefully monitoring my health and the weather, I was just enjoying being out in the world on two wheels.


The sun battled with clouds all the way under Algonquin Park and I soon found myself lining up for an approach back toward Haliburton, this time from the east.  Once again I elected to cut some extra miles out, forgoing a ride to Gooderham for the joys of the 118.


Swooping through the lake of the woods while leaning the ever eager Tiger around lakes, trees and rocky outcroppings had me in nirvana; it was like riding through a Group of Seven painting.  



By this point the drugs were wearing off, I'm starting to wilt and the deed is almost done.  The last few miles into Haliburton turn ominous as dark clouds fill the horizon and  the temperature drops.  I steel myself for the final push.



As the sky fills in and the rain starts to fall again, my goal is in sight.  I pass through the small town of Haliburton like a ghost and pull up just as house keeping has cleaned our room (the family is out at the pool).  Ten minutes later I've taken another round of drugs and I'm in a whirlpool tub getting the heat back into me.

The logic I followed doing this was:  any day on a motorcycle is a good day.  Even with a fever and a nasty virus I had a great ride and a real sense of satisfaction in completing my birthday loop of the Haliburton Highlands.  It would have been nice to do it without feeling like I'd been turned inside out, but hey, any day on a motorcycle is a good day.


The ride:  a 270 km loop through Algonquin Park and back around to the town of Haliburton.  All told I was on the road for about four and half hours, including a gas stop, a coffee at the Algonquin Visitor's Centre and a leg stretch in Maynooth.



The camera: a Ricoh Theta SC.  It takes two hemispherical photos in both directions and then stitches them together, which makes the camera disappear in any photos it takes - which is pretty freaky.  

Having all hardware buttons, you don't have to futz around with a smartphone to interface with it like you do with the Fly360.  As a camera to use while photographing a motorcycle ride it doesn't come much easier than this.  It'll do video and save it in 360 format so you can look around in the video on a smartphone.  It does the same thing with photos.  

The photos in this piece were opened in the Ricoh software and then screen captured.  That's how I cropped images to show various things.   The original, unedited photos are pretty funky (see below), but look good with some judicious cropping.



Where we stayed:  The Pinestone Resort just south of Haliburton.  The prices are reasonable and you get a nice room.  The facilities are good with golf on site (if you care about that sort of thing) and a salt water pool and sauna.  The onsite restaurant had us waiting 90 minutes (in my case for a French onion soup and salad) and isn't cheap.  Eating elsewhere might be a good idea, especially on a busy weekend, but anything else is at least a ten minute drive away in town.  We stayed there last summer on our ride back from The Thousand Islands and it was good - they seemed to have trouble handling the traffic on a long weekend this time around though.
Standing on the side of the road
futzing with a smartphone interface.

360Fly:   The one benefit of the Fly is it's more weather proof than the Theta, so I set it up on the tachometer of the Tiger in light rain and left it recording a time lapse video of the ride from Maynooth to Haliburton - it's about an hour or riding compressed into 20 seconds.  The much fiddlier smartphone connected Fly wasn't ideal for a ride like this, unless I was going to set it and forget it, like I did.  It also doesn't take a full 360 video, it only has one eye unlike the two on the Theta.

Friday, 6 July 2018

Kawartha Highlands Circumnavigation


A July ride in the Haliburton Highlands:  the plan is to take a few days at the end of next week and head up to the in-law's cottage.  It's just outside Bobcaygeon, Ontario and makes a great base for riding into the Canadian Shield in Haliburton.

The way into the lake is a fire road. all gravel and twisty like a rally stage.  I'm actually looking forward to it now that I've done the SMART training; time to see if I can apply some of those off road skills so that the whole way in isn't a nervous ride on a loose surface.

The next day I'll take the Tiger out for a lap around the Kawartha Highlands Provincial Park.  I did the Haliburton Highlands last spring on a birthday ride.  Weaving through Canadian Shield lakes, woods and massive rock outcroppings is never a bad thing.  Because of all those geographical features, Haliburton is one of the few places in Ontario where the roads have some character; you spend very little time on the crown of your tire.

If I'm finding the ride going by quickly there are a lot of alternative routes built in.  The 504 looks like it would be fun to ride both ways.

10 North off the 648 up by Tory Hill also looks like it would be a good two way ride.  It'd be easy to add some additional pieces on the day if time permits.





One thing's for sure, that night around the campfire at the cottage is going to feel good...




The short route - 261kms. The longer route (318kms below) also covers the twisty 10 north of Highland Grove...


With that done and after a couple of days in the woods, it's off to the Atlak Tour meeting in Torrance, Ontario at the Clear Water Brewery.  It's only a couple of hours along more twisty Haliburton Highlands roads before a 2pm start, so I even get to sleep in.

I'll bring my fifteen year old/seventy-thousand kilometre old Tiger up there and see what the new ones have to offer.  One thing I think they're missing are the striking style of my '03 model.  At some point Triumph went BMW GS with their adventure bikes and started chasing the military look.  My whimsical Tiger strikes up all sorts of conversations wherever I go, I'm not sure that the newer models have the same curb-side appeal, but I'll find out soon enough.



It's two hours out to the Triumph event and then two and a half hours home afterwards, but on a Saturday evening on a summer weekend it'll be an empty highway that meets me; I can get home in less than two and a half hours.

It's a busy few days, but on these kinds of roads they'll be anything but dull.




Thursday, 18 May 2017

Halliburton Highlands Birthday Holiday


A birthday long weekend riding holiday... based out of the Pinestone Resort in Haliburton (so easy access to the Haliburton Highlands Riding Roads).


The Ride Out:
https://goo.gl/maps/CL8SAjzNZTH2
356kms



Haliburton Highlands Research:
http://ridethehighlands.ca

The Dynamite Loop:
https://drive.google.com/open?id=1lNb6sb91J-eFxYk0P9Mhxr-1emQ&usp=sharing



Possible Sunday Loop:

https://goo.gl/maps/ER7BEX68bC12
287kms





The Ride Home:
https://goo.gl/maps/c624FERhJYM2
283kms with a stop at The Millpond Restaurant for breakfast.

Total kilometres:  926 over three days






The weather:

Sunday's going to make for some nice, rainy photographic opportunities.

Monday, 16 July 2018

Kawartha Highlands Loop

On Friday, July 13th, while thousands of people lined up to get into Port Dover, I left the cottage early (just before 7am) and headed out on my planned circumnavigation of the Kawartha Highlands Park.  It was already well into the twenties Celsius and humid when I left.  The fire roads into the cottage are a roller coaster rally stage of gravel over muskeg and Canadian Shield with tough, weedy firs and birch trees growing in the cracks.  It's fun in a car but a bit nerve wracking on a bike.

It's tourist season in the Haliburton Highlands and on the weekends the roads actually have some traffic (like, a few vehicles: Canadian country traffic), but on this Friday morning it was quiet.  I was lucky to see another vehicle pass me in any five minute span when I set out and the cottage road was just me and the bears.




I was out to Lovesick Lake Restaurant just before 8am for breakfast, only to discover it doesn't open until 9am... for breakfast... in the middle of the summer.  Having not eaten and already on the road for an hour, I was disinclined to hang around for seventy odd minutes.  Fortunately, a couple of years ago we did a family Thanksgiving at the Viamede Resort just across Upper Stony Lake so I figured I'd give them a try.  

I pulled in just as the breakfast buffet was underway.  It was twenty bucks for breakfast all in, but it was all you can drink quality coffee and real juices along with a buffet all you can eat hot breakfast with fruit and all the other odds and ends you'd expect from a high end resort.  If you've got the time and you're up that way, Viamede is a nice way to start a day of riding, and you're looked after by a fantastic staff while eating a great breakfast in a beautiful environment.  It's probably cheaper than a lousy hot dog at Port Dover and no line up.

When I came back outside it was heating up but I was full of beans (literally and figuratively) and percolating on that freshly pressed coffee.  Northeys Bay Road east out of Viamede was a roller coaster, weaving through outcroppings of rocky Shield as it worked its way around the end of Upper Stoney Lake.  At one point I came down into a valley only to discover a rafter of wild turkeys the size of sheep standing on a rock outcropping eying me as I went by; it was like riding through a herd of dinosaurs.  Northeys Bay turned onto County Road Six, which took a less sinuous and more  severe route through the woods.  From Six I was onto Forty-Four and the twists were back on again until I got to 46, but even the bigger roads were still constantly weaving, just with fewer gear changes.

With the slower, technical roads around Stoney Lake behind me, I struck north, deeper into the Shield.  46 and the 504 were both full of fast sweepers that seldom had me on the crown of my tires.  I pulled into Coe Hill Cafe about 10:30am.  After three hours on the bike my knees needed a rest, so it was coffee time.  It was me and four tables of retirees all talking politics and telling 'in my day' stories (they'd all owned bikes at some point).

A couple of cups of coffee and I was ready to tackle Lower Faraday Road.  This little road out of Coe Hill is twisty, turny thing.  Last time on it two years ago I was disappointed at just how rough it was, but sections of it have been resurfaced since my last attempt and this time I could exercise the sides of the tires a bit.  The top end of it was still rough, but that's one of the many benefits of riding a 'big trailee' adventure bike:  they can handle Ontario's terrible pavement when it gets rough.

Out the top of Faraday I pushed on up to the 648 'Loop" road through Highland Grove, Pusey and Wilberforce.  I was initially thinking about extending the loop through Bird's Creek and Maynooth, but it was touching forty degrees with the humidity and a swim in the lake that afternoon held more appeal.

I wasn't on the 118 for long, but once again I was reminded what a lovely thing it is.  If you like fast, sweeping corners through beautiful scenery on well finished roads, the 118 won't disappoint.  I think I prefer that kind of road to the super tight, technical, twisty roads that get all the attention and usually have lousy surfaces.

From Tory Hill I was dropping south along the western side of The Kawartha Highlands Provincial Park, once again on near empty roads.  The Tiger had burned off most of a tank of gas and was light and eager, and after six hot hours in the saddle, I was looking forward to a swim in the lake.  Like that post breakfast section around the end of Upper Stoney Lake, this road felt weightless and easy.  I get to the end of sections of road like that and realize I'd forgotten where I end and the bike begins.

I was back at Nogie's Creek before I knew it and riding the seventeen odd kilometres down increasingly small and twisty gravel fire roads into the lake...


I did the SMART off road training course a couple of weeks ago and was looking forward to seeing how my usually white knuckle approach to riding on gravel had changed.  I was in and out of the cottage a total of six times over the four days there and never once got a hand cramp.  In most cases I was resting my open hands on the bars and letting the throttle sort out any wobbles.  If you're anxious about riding on loose surfaces something like the SMART program is a great way to acclimate yourself to it and lose your fear of it.

I was back at the cottage by 2pm and in the lake shortly thereafter.  Once again the Haliburton Highlands had impressed, offering an assortment of interesting roads that are vanishingly rare in the table-top flat South West where I live.  The Tiger was once again a rock star, prompting discussions wherever we went and starting at the touch of a button.  It carried me and two panniers full of tools and rain gear around the Kawartha Highlands while soaking up bumps on some truly awful pavement and feeling like an eager sports bike when the going got smooth and twisty.  Best of all, we managed it on near empty roads with no delays and some spectacular scenery.

Best Friday the thirteenth ride yet!  About three hundred kilometres on near empty roads through picture postcard scenery and not a crowd or line up in sight.  That's my idea of what a motorcycling celebration should look like.  I'll leave the dressing up like a pirate and lining up to look at other pirates to the people think that is motorcycling.  I prefer to actually go for a technically challenging and picturesque ride, and boy do the Haliburton Highlands deliver.

Early morning map check after my first breakfast destination proved unserviceable...





Here are some full 360° images from the ride:
The cottage fire road out of Bass Lake. - Spherical Image - RICOH THETA


The twists and turns of the Haliburton Highlands. - Spherical Image - RICOH THETA


Lakes, woods and Canadian Shield. - Spherical Image - RICOH THETA

The on-bike 360 footage was captured by a Ricoh Theta set to auto shoot every 30 seconds, so you can set and forget it.  The images are screen grabs from out of the 360 panoramas.  You can lean how to do this yourself (it's easy!) here.

Sunday, 21 July 2024

Haliburton School of Art & Design: Blacksmithing


 I've been wanting to refamiliarize myself with metal work for some time.  I don't like farming out work that I'm capable of doing myself and there was a point early in my working life when I was welding weekly as part of my millwright apprenticeship, but I haven't joined metal in over three decades. It's amazing how the time flies when quantum cyber research gets in the way.

Finding opportunities to develop these DIY technical skills in Canada where people don't like to DIY is a challenge. The only welding courses I could find were full-bore certificate courses for professionals, but then my wife found the Haliburton School of Art & Design. HSAD takes place in Haliburton, which you'll have heard about on TMD before because it's one of my favourite places to go for a ride in Ontario. It's also only about three hours from home.

HSAD offers piles of course options ranging from visual arts to technical crafts. If you're reading this you'll probably be interested in the blacksmithing course, not necessarily for the smithing but because it offers you access to expert metal workers in a fully tooled shop that will make you hands-on familiar with not only the hot forging of metal but also various other related technologies such as welding, grinding, polishing and plasma cutting. The three of us went up for the week with me doing the smithing, my son glass blowing and my wife water colour painting.

We were asked to bring a project, but what you really need to do for this is to start amassing ideas so when you're in the forge you've got a list to go after, that way you're not wasting time in front of a hot forge wondering what to do next. I showed up with my copy of the Rudge Book of the Road and an idea to build a metal sculpture of the line art in the front of the book.



My blacksmithing experience consists of an afternoon, so I thought this would take me the week, but by the end of day one I'd already worked out the rider in hot steel and started worrying that I'd run out of project.


I figured getting handy with welding would take a some time, but I forgot to take into account technological progression. Back in the day (in the late 1980s) when I was learning how to weld it was all stick (and no MIG carrot). It took about 15 minutes for Amie to talk me through the MIG process and ten minutes later I was tacking pieces together to get my layout right. No sparking a rod to see where you are either with modern instantly darkening welding helmets. Early efforts at joining pieces were messy but by Thursday I was knocking together pieces at will with clean welds. It's now just a  matter of practice to get back to a point where my joins are a point of pride.

Monday was a real hot-box with temps in the mid-thirties. In the forge it was well into the forties and I was drenched when I left. I should have shown up with better heat management methods and was very dehydrated when I left. I recovered as best I could overnight. The next morning I was still not feeling well but got myself in, got a handle on welding and put the rest of the design together.
I woke up Wednesday properly sick with the mother of all summer colds, but the only thing I needed to do to finish was the rider's scarf. With a bit more hot forming of steel and welding I had my 1920s art deco styled Rudge metalwork sculpture done.

On a side note - the propane forges aren't very big and don't work for long, complicated pieces, but the shop had dual coal forges with four working sides in the back room that let you heat longer pieces. The only trick with the coal forge is that it can get so hot it'll burn the steel (which looks like sparklers when it goes). The propane forges are set to not get that hot, but the coal forge can, so in addition to feeding the beast you also have to be careful it doesn't burn your steel. I ended up leaving the scarf in too long and it burned through at the back, but that wasn't necessarily a bad thing as I wasn't able to create the creases I was looking for in the ends. After burning it in half I was able to make the creases and weld the two sides back together, making it better than it would have been otherwise.
  
Old school, but it does offer some advantages along with some challenges...

I then got a primer on how the grinding room worked. The temperatures were dropping from Monday but when you're wearing face protection, a leather apron, long trousers, steel toe boots, leather gloves and a respirator, it's hot anyway. Even with all that and feeling right rotten I enjoyed getting a feel for grinding and cleaning up finished pieces. I get the sense that grinding is another one of those hands-on skills that can go surprisingly deep.


The end result was hung outside and I got given a spray on chemical that would prevent it from rusting while showing off the ground metal finish.


The finished piece looked so nice I got a clean image of it and then updated the logo on the site with it, and began the process of moving away from TMD logos focused on what I'm riding at the moment.


 


Amie Botelho was our instructor and she is all about hands-on learning. Most mornings we
did a 15-20 minute demo of tools and techniques that you could immediately find a use for. Any time you needed other equipment you'd do one on one safety and how-to training and be let at it. On the forge (and everywhere else in the shop)  Amie is incredibly efficient and that teaches you all sorts of lessons if you watch closely.

It isn't about how hard you hit, it's about how efficiently you get get hot steel out of the forge and under the hammer. It's also about turning your project over and looking at it closely as you work it. Smithing isn't about brute force, it's about attention and precision, but watching a master smith do it is infinitely better than reading about it in a book or hearing someone drone on about it in in a lecture.

Every demo was immediately followed by the suggestion to 'just do it', complete with lots of support in a class of 16 from Amie and shop-tech John. But the best part is that most of the 'students' are actually experienced smiths themselves. The ones around me had all done the four month certificate program at Fleming, so you're surrounded with experienced metal workers who are very free with support and advice (if you want it - you're left to your own devices if that's your jam).

If you're looking to hone your metalworking skills, or want to jumpstart them from scratch, this is a great place to start. Just make sure you show up with lots of ideas if you don't want to be cranking out spoons and bottle openers all week (unless that's your jam) - they're totally open to whatever you want to tackle. We had students working on everything from building a barrel forge of their own involving big industrial pieces, to yard art metal work using the small stuff.  Those experienced smiths in many cases were churning out all the smithing they needed for the year. One told me he'd make the $700 fee for attending for the week every day in what he was producing, making it well worth the cost.

Why come at it like this? Canada being Canada makes it very difficult for you to do things like forging or doing metal work on your own property without hanging you out to dry with insurance and infinite municipal, provincial and federal paperwork. Coming at it this way gives you access to a full service metal shop with all the tech and consumables, and with the safety and insurance challenges all taken care of. The bonus is you also get to hang with an interesting group of like-minded DIYers for the week, which is worth the price of admission alone.


The bandsaws looked like they were older than I am, and I'm feeling old this week!




Once I had the Rudge line art metalwork done I had a go at plasma cutting. I was originally thinking of making a variation on the Isle of Man TT trophy, but symmetrical wings are well out of my wheelhouse without more practice, so I turned it into an absurd door stop with a vaguely Honda theme.
 
Not bad for my first go with a plasma cutter!

Spoons are properly hard work. I found the edge of my forging techniques there quickly!

True that.

The forge at work.

He was early for lunch... this takes place in Haliburton, there are (lots of) deer.

Yep, I did a bottle opener too.

The propane forge at work.