Saturday 25 February 2017

A Ride Stolen From Winter

February isn't a giving month for motorcyclists in Canada.  Last year, with the twenty three year old Kawasaki in pieces, I was unable to get the thing out on the warm weekend we had in December, and couldn't even get it going when the snow finally cleared in March.

Since the Tiger was only getting regular maintenance done, it was turn-key ready when we suddenly had a warm break in February.  With snow melt running across the road and the temperature a heady 7°C, I enjoyed a foggy ride in to work, and a slightly warmer ride the long way around home in the afternoon:


Music by Shannon Rose & The Thorns: Seasons is a brilliant album, you should get it!

Once home I power washed the sand and salt off the Tiger and parked it up again.  A single day on the bike blew off the cobwebs and renewed the promise of things to come.

Sunday 19 February 2017

Chasing Virginia Waterfalls



My cousin in law shared this and I thought it would make for a nice, twisty ride.  It got to double digits yesterday and my throttle hand is getting itchy event though we're still knee deep in snow.



It's a 271 mile ride through the Virginia Appalachian Mountains connecting nine waterfalls.  It might be a bit much to try and manage in a day, but over a couple of days it'd be a two nearly 300km days of twisty road riding with a lot of waterfall watching in between.  If two days of mountain roads and waterfalls don't cure what ails you, nothing will.




I'd previously thought about doing a ride down the Appalachians to Deal's Gap as the full solar eclipse is passing over there in mid-August this year.  This is about two thirds of the way down from Ontario.  It'd make a nice break from the drive back north to spend a couple of days chasing waterfalls along winding mountain roads.

Tuesday 7 February 2017

Honda Getaway

Asking $5577+GST.
I'd offer six grand all in.
It barely has 1000kms on it.
A comfortable fit on a small bike,
even for a big guy like me.
This lovely little Honda CB500x popped up on Kijiij.  As an icestorm approaches I'm dreaming of being elsewhere, as I often do during the off-season.

Two grand looks like it'll get the bike air freighted from Toronto to Ecuador.  The South American tour would take me south down the Andes and then finally to Ushuaia before working my way up the Atlantic side to Rio de Janeiro.

Just over 16,000 kms - a nice 3 month jaunt.
By the time I worked my way back up to Rio on the little Honda, it would have done tens of thousands of kilometres across some pretty rough terrain on not the greatest gas.  I'm sure I could find a happy rider in Rio to hand it off to.

Averaging 250kms per day, it's a 60 day trek.  With some wiggle room, this would be a nice three month jaunt, mid-February to mid-May.  The MotoGP circus passes through Argentina in April, so that'd be a nice thing to be able to ride to as well.

Saturday 4 February 2017

Winter Motorcycle Diaries

I'm waiting on an above freezing day to do the coolant flush on the Tiger (it needs to run to circulate coolant and doing that in a closed garage in freezing temperatures isn't a good idea).  After that I'll be able to put it all back together and aim it at the door for the first possible ride when the snow eventually clears.

In the meantime, Jeff's airhead adventures continue.  The old BMW is in pieces and this week we took the biggest lump over to a local metal shop to get it bead blasted down to the metal.  I'm curious to see what this industrial process does for the BMW engine which looks like a piece of industrial art to begin with.  DK Custom Welding is run by former graduates of the high school we work at.  Their shop out in Salem is a magical place.

The air cooled lump prior to an industrial quality cleanup.

They have a full service metal shop at DK Custom Welding out in Salem.  

Lots of interesting lines and asymmetrical details on the old air head.

A wide variety of classics were getting restored in the shop - they'd done a lovely welding job on a new floor pan on one 60s muscle car.
In other motorcycle news, Triumph Canada had a fantastic sale on some of their clothing, so I jumped on it.  Sturgis Cycle delivered it wicked quick and it's some really quality clothing.  At the price I feel like I stole it!

It's the depths of winter, probably about as far from a ride as I get, but MotoGP is testing in Sepang and their winter programming is always interesting.  Last week I saw their video on Öhlins and how motorcycle suspensions work, which was very insightful.  The amount of punishment a motorcycle shock takes in a single lap when ridden in anger is astonishing.  I'd rather be punishing the new fork oil in my own shocks, but at this time of year I'll take what I can get.

Sunday 29 January 2017

Dakar Dreams

I just finished this year's Dakar and it always starts the itch.  As a bucket list item it's well beyond my ken, but I still sometimes think about it.  The cost is in 1%er territory and a school teacher from Ontario isn't likely to find support from advertisers that would allow him to compete.  But hey, what's mid-life for if not your last chance to do the impossible?  The other day a buddy said, "you don't want to be sitting around when you're old wondering what you might have done."  Even an attempt at a Dakar would be special.  Finishing one would be a crown jewel in a life well lived.

In an interview during Charlie Boorman's Race to Dakar, one of the competitors says he does it because it's two weeks of singularly focusing on one thing, which he found relaxing.  Simon Pavey, Charlie's teammate, said he does it just so he doesn't have to do dishes for two weeks.  I get the angle.  Being able to singularly focus on something is a luxury few of us can afford.  Life is a series of compromises and multiple demands on our time.

I've been watching The Dakar long enough to not harbor any illusions about winning it or even placing well, but I would certainly hope to finish.  Having a Dakar finishers medal puts you in a very small circle of excellence, and toughness.  The people who know what it is would have mad respect when they saw it.

To get there you need to take on the almost religious piety of a professional athlete.  I'd give myself two years to get the experience and fitness levels I'd need to give it an honest try.  I know I wouldn't stop unless circumstances stopped me (I'm perverse like that), so it would simply be a matter of preparing as well as I could for it.  I turn 48 this spring, so I'd be doing a Dakar in 2019, the year I turn 50.  My goal would be to complete a Dakar and document as much of it as I could in the process.  From the beginning to the end I'd be making notes that would eventually turn into a book:  Mad Dogs & Englishmen: A Middle Aged Man's Dakar.


A Zero electrically driven Dakar Rally bike?  Yes please!
Maybe by then there would be an electric motorcycle that could manage the stages with quick battery swaps at the stops.  Maybe I should be asking Zero if they'd like to consider a Dakar run.  Being the first electric bike to finish a Dakar would be something.  Electric cars are getting there now.

Finding sponsorship with companies I already have a relationship with would be a nice way to make this attempt a more personal one.  Everybody runs KTMs, Hondas and Yamahas, but I'd love to ride a rally prepped Kawasaki, Triumph or maybe a CCM; all companies who have had an impact on my motorcycling career.  Getting some degree of factory and dealer support in that would be fantastic.

A lot of riders gopro their experiences from within the Dakar itself, but I think it would be cool to get some next level media out of the event.  Running a 360 degree camera would be a goal.  Having a small, agile, media production crew along who could capture drone footage and support the 360 footage from inside the race could eventually lead to an immersive video of the event that gives some idea of how it feels to be in the Dakar; an everyman's view of the race.  Dreamracer does a good job of this.  I'd try to emulate that approach with newer technology.  Since not a lot of Canadians participate in the rally, I might be able to drum up local support that other rally riders could not.

Deep winter, mid-life dreams about doing something impossible... all I'd need is an opportunity.

LINKS


Where to find your rally kit:  Rebel X SportsNeduro


Sample Dakar budget, another sample budget

A 2017 Dakar how-to video series by Manuel Lucchese

What Dakar riders wear article


Dakar advice on putting together an entry:

Before setting off in an active search for sponsors, it is important to define your project clearly by

answering the following questions:

Why am I taking part in the Dakar?
What are my motivations?
What are my objectives?
What are my assets in achieving those objectives?
What sort of crew do I want to set up?
What resources do I need to achieve this?
It is important to detail the various cost items in order to have a clear idea of your expenses (Vehicle preparation – Registration – Trip – Visas and passports – assistance vehicle(s) – mechanics registrations…) After this stage, you must have answers to the following four questions:

What is my budget?
How should I present it to my potential partners/sponsors?
What are my available funds?
How much should I ask for from my potential sponsors?
Your potential sponsors must be targeted : better to count on your relational, personal, professional or regional fabric rather than “major sponsors” who may be less inclined to support you. Make a list of your potential partners and characterise them:

What do they do?
Why would they be likely to help me?
What specific arguments should I put forward?
What funds do they have available?
Which companies should I see as a priority?
“Do not make mistakes in what you say or who you target”. There is no point in talking about your potential sporting achievements if you are taking part in your first Dakar! Your aim is to finish, not to be placed! So, assess what you say and in particular your media exposure: amateurs will be the subject of one-off reports, they are frequently mentioned in the local and regional media but do not promise the TV news or a daily sports newspaper!

Prepare a personalised dossier to present your project. This presentation must be clear, concise, persuasive and imaginative; it must make them dream of the rally but also convince them of your personal qualities.

You need to highlight your special features, your motivation :

What is original about your entry?
Why are you passionate about motor sports (and cross country rallies in particular)?
What previous experience do you have?
Consider presenting your sporting profile: draw inspiration from statistics on Dakar 2015. Put yourself into the rally: in terms of age, type of vehicle, number of entries, status (professional or amateur). Stress your nationality and your region! Identify potential media spin-off: media statistics can help you identify press, radio or even TV spin-off in your region.

Regional media are frequently looking for a potted history of amateur competitors; so do not hesitate to contact them and suggest an interview, your potential sponsors will only be more impressed!

Present your arguments to justify sponsorship:

To give out a good image of the company at local, regional or national level thanks to media spin-off. The company’s name (and/or one of its brands) is associated with your entry and the adventure of the rally.
To change or strengthen the company’s image internally. To advertise the company’s main values, the directors can use event sponsorship to motivate employees and/or associate the company with values such as courage, surpassing oneself, competition, human adventure,… which characterise the Dakar.
To build a relationship with their suppliers/customers. Sponsorship may be a way for one of your suppliers/customers to build strong links before or after the conclusion of a partnership.
To involve your sponsors indirectly in the adventure. The Dakar is a mythical trial in which everyone who is interested in motor or extreme sports will want to take part one day… These fans, potential sponsors, will be all the more inclined to help you in this challenge if they can live the adventure by proxy.
To enable the partner company to enjoy tax relief. Depending on the country, sponsorship offers tax breaks. Consider putting forward a small sales pitch to demonstrate these tax breaks according to the legislation in your country.

Highlight the benefits of financial support or support in kind :

Visibility of their brand/company name on your vehicle, your clothing, your helmet, your Leatt-Brace, your trunk, your assistance vehicles…
A free trip on a rest day or on arrival: for the most generous sponsors, a day at the rally is a weighty argument for those who want to taste the atmosphere of the Dakar!
Event organisation: exhibiting the vehicle before or after the rally, or a photo exhibition…
Finally, do not forget to…
Keep them up to date with your exploits during/after the rally (sell IRITRACK!)
Give them a DVD collection of Dakar articles, or a detailed press review, or a photo album to thank them.

Sunday 22 January 2017

Changing Motorcycle Fork Oil

A three legged Tiger.
Changing fork oil turned out to be pretty straightforward.  The most time consuming part is removing any niggly body panels so you can get at the forks themselves.   Make sure you loosen the top fork plug before you remove the forks as you need the forks firmly held while you do that and the clamps on the bike are designed to do just that.  Once you're there, undoing the clamps that hold the forks means they'll slide right out, so be ready for that.

The spring on the Tiger is a
progressive rate unit - it is
sprung tighter the lower it
goes.
Once on the work bench it was a matter of taking off the rubber fork protectors and cleaning up the unit.  I then slowly removed the top of the fork using a 22mm ratchet while keeping pressure on.  The book said the cap is under 'considerable' pressure from the spring, but with the fork fully extended it released quite gently.  With the cap off I removed a spacer, a washer and the spring slowly as the fork is full of oil.  Pulling the spring out quickly means you're pulling oil out and making a mess.  With the parts out I inverted the shock assembly and poured the old oil out into a measured container to see how much was in there and what condition is was in.

The oil came out looking pretty dark - the new stuff was completely transparent.  Since the previous owner didn't appear to change the oil in the engine, I doubt fork oil ever got looked at; this stuff has probably been in there a while.  There was no corrosion in or on the forks themselves or on the internal components, so after a cleanup I poured 710ml of new fork oil into the fully compressed fork.  I had to raise the fork to install the spring, washer and spacer and then put the cap back on snug.  I later tightened it to torque specs when it was reinstalled on the bike.

Spring number two gave me about 660ml of oil after a good emptying.  The first one was at about 650ml.  It got refilled to 710mm of heavier 15 weight fork oil to reduce the floatiness of the front fork and deal with my weight better.  I'm looking forward to feeling the difference when the snows clear.
If you've got a bike with fairings I'd guess a fork oil change would take you an easy afternoon of work.  If you've got a naked bike then this is a matter of removing the front wheel and brake calipers, loosening the top cap, loosening two clamp bolts on the triple tree and handlebar clamps and sliding the fork out.  Removing the cap and internal components and emptying the old oil would only take about ten minutes per fork.  Refilling a compressed, empty fork with the required amount of fork oil and putting it all back together another ten minutes.  Once you were familiar with the process on your naked bike it wouldn't take more than an hour to do a fork oil change - longer if you have a lot of finicky fairings to remove.

The left photo is of the fork assembly off the bike prior to removing the rubber fork gaiter (which cleaned up nicely with warm soap water and then some Armourall).  On the right:  all back together again.  The front wheel got regreased and cleaned up.  The speedo housing was especially mucky.

LINK to the specs research I did on fork oil changes on this particular Triumph Tiger.


The other fork had about 650ml in it - pretty black considering it was clear when it went in.


Sunday 15 January 2017

Replacing Plastic Fuel Fittings: that was a pain in the ass

Well, that was a pain in the ass.  It began well enough.  Removing the metal clips from the plastic fittings was pretty straightforward.  Push the pin in and then gently tease them apart and you don't have springs flying everywhere.  I'm a bit confused as to why I needed to save the bits as the new fittings come with clips, but I'll hang on to them anyway.

Following the directions online, I next took out the lower plastic fuel fitting in about thirty seconds.  The upper one (that leaks) immediately broke (I suspect it already was) and proceeded to spectacularly fall apart.  I spent the next two hours with a hot pick pulling bits of brittle plastic out of the metal fuel tank threads.  It turned into tedious dental surgery rather than a quick repair.

With the plate now clear of detritus, I should be able to install the new metal fittings and resolve my leaking fuel tank once and for all.  Since I have to remove the tank to pretty much do any engine maintenance at all, this fix will make the Tiger maintainable again.

With the fuel tank fittings sorted I'll next be doing the fork oil (never done that before), change the plugs and do a coolant flush (which requires multiple fuel tank removals).  The Tiger will be fit should spring ever arrive.

Online Notes on Fuel Fitting thread sealant:
What to use for fuel fitting thread sealant:
https://www.jamestowndistributors.com/userportal/document.do?docId=563
Don't use teflon tape for fuel fittings!
http://www.jalopyjournal.com/forum/threads/teflon-tape-vs-gasoline-question.264585/
These guys make it:
https://www.permatex.com/products/thread-compounds/thread-sealants/permatex-high-performance-thread-sealant/
It's available locally:
http://www.canadiantire.ca/en/pdp/permatex-high-temperature-thread-sealant-6-ml-0383777p.html#srp

The metal plate the fuel pump is connected to on the gas tank has a couple of plastic fuel fittings screwed into it.  The top one is leaking and was a pain in the ass to get out, the bottom one came right out easily.
The plastic male ends go into plastic female ends in a metal fuel pump plate.  Shortly it'll all be stainless steel.
Getting it that clean took some patience.
The big, orange Triumph Tiger in maintenance mode - the battery pack is on the back to raise the front wheel off the ground for the coming fork oil change.
Finished it up the next day.  Got the thread sealer from Canadian Tire and they went back together nicely: