Showing posts sorted by date for query ninja 650r. Sort by relevance Show all posts
Showing posts sorted by date for query ninja 650r. Sort by relevance Show all posts

Friday 11 July 2014

How to Break/Resize/Install a Master Link on a Motorcycle Chain

A 2007 Ninja 650R with its pants down (chain and front
sprocket cover removed)
If you've never done chains and sprockets on a motorcycle before, they are complicated.  Being an open part of the drive system, they offer a relatively easy way to modify your bike's performance.  With smaller (faster) sprockets you can produce a revvier, shorter geared engine.  With a shorter chain you can close up your wheel-base creating a bike more willing to change direction.  Chains and sprockets are a bike fettler's delight.

On top of sprockets, you also have a pile of chain choices.  O-ring chains are the cheaper, lower efficiency alternative, while X-ring chains offer more efficiency and less maintenance at a higher cost.  They also come in a rainbow of colours and a variety of sizes from little dirt bikes all the way up to thousand plus cc super-bikes.  


Chain sizes and dimensions
From little dirt bikes to bike motors.
Chain sizing is based on the width of the chain and the length between the pins in the chain.  You've got match all these up with the right sprockets or it won't all fit together.  With so many factors in play, it pays to get a handle on chain mechanics before you take a run at changing the chain on your motorbike.

Here's a primer on how to break a chain.  Some people say cutting a chain but you aren't cutting it, you're breaking it by popping the rivet out and dismantling the chain links.

How to Break a Chain:

  • If you're removing your old bike chain, find the master link (it should be the one that's different from all the rest)
  • Put a chain breaking tool on the chain and push the rivets out - do a bit on each side at a time until the chain 'breaks' open.  I did this with a bicycle chain breaker (see bottom) and it worked fine.
  • Once you've 'broken' apart the master link the chain will come apart and you can pull it through and free of the bike.

To reduce chain size on a motorcycle:
  • if you have a 520 or smaller chain and a good motorcycle specific chain link breaking tool you can simply push the rivet through (see the video at the bottom)
  • if you don't have specific tools, grind or file down the rivet and then tap it out with a hammer and punch pin.  If you grind down the rivet you can also use a bicycle weight chain breaker (see a pic at the bottom) to push out the worn down rivet.
  • triple check which link you want to pull and use something like Gearing Commander to make sure you've got the right number of links in your chain.  (This is what I'm kicking myself for not doing).
  • Using the bicycle chain puller on filed down pins, I pushed on side and then the other and then repeated the process and the rivet popped loose along with the outer chain links.  Since you're only filing down the outer link (which you'll chuck after) it doesn't matter if you file into it a bit.
  • With the chain dismantled you should now have two inner links ready for a new master link.
Installing a New Master Link:
  • Install the little rubber washers on the master link rivets and slide it onto the chain - do this on the sprockets as it's easier to do with some tension on the chain.
  • put the last two rubber washers on and the end plate and then use the chain tool or some other kind of clamp to press the side plate on.
  • if you've got a rivet type master link you need a light hand and some patience to press in the rivet ends.  If you're too heavy handed you'll bind the chain and swear a lot.
  • The more traditional type of master link is the kind I was familiar with from bicycles.  It comes with a slid on clip.
Don't freak out if you've got the rivet type master link, just make sure you have the right tool handy.  The rivet type link is very strong and performs pretty much like all the other links if installed properly, which is why you'll find it exclusively on high performance chains.  Check out the youtube video at the bottom for a good primer on how to do this.

If you take your time and work through it slowly, you'll have a new chain on in no time.  If you want to get into sprockets the rears are remarkably easy to do.  When you remove the rear wheel bolt the wheel drops down and the floating rear caliper on the Ninja 650r simply disengaged and I hung it on the frame.  You can then remove the wheel.  The rear sprocket is held on with your typical nuts and was easy to swap out.

This front sprocket is a f&#*er.
The front sprocket was in good shape, so I gave up on it.  Others online have said that they are pretty straightforward if you have an air gun, but even with a breaker bar I couldn't budge the damn thing and I can pick up a car by the fender.  You remove the front sprocket by bending back the holding washer, putting the bike in gear, stepping on the rear break to hold everything still and removing the nut (it's a good fit on a big 27mm bit).  If there's a trick to this (other than getting a compressor, air tank and air tools), I'd love to hear it.

Follow up with Chain And No Agony for how easily the new chain went on with the right tools.


SOME CHAIN & SPROCKET LINKS THAT MIGHT BE HANDY:

If you've only got a bicycle chain
breaker, file or grind down the rivets
first before you push them out.
If you've broken bicycle chains before you know the basics.  Motorcycle chains are much heavier duty so the process requires stronger tools capable of dealing with stronger rivets.  If you have a bicycle chain breaker you just have to take your time and file down the rivet you're going to push through first.  It took me a couple of minutes of filing to do this.  Lazy people on the internet say buy a Dremel.  If you're lazy, that's what you should do.

VIDEOS

A video on how to break a motorcycle chain (skip to 35sec when the mechanic comes in) in order to re-size it using a motorbike specific tool

A good primer on how to install a master link (and how the pressed, rivet type master links work)

How to measure a motorcycle chain

Hillbilly mechanics: how to do a master link without special tools.

LINKS

Gearing Commander - a handy webpage that lets you compare different sprocket and chain combinations
http://www.gearingcommander.com/

DID company chain guide:

http://www.didchain.com/chainSpecs.html

Motorcycle Chain primer on about.com

http://motorcycles.about.com/od/motorcyclemaintenanc1/ss/Chain_Maint.htm

Wikipedia's history and technically detailed chain description
http://en.wikipedia.org/wiki/Roller_chain

Layout of a roller chain: 1. Outer plate,
2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
An exhaustive history of chains!
ttp://chain-guide.com/applications/1-5-2-motorcycle-chain.html

How Motorcycles Work's awesome chain diagram:


Chain and Agony, or, the End of Local Parts Suppliers

I've got to admit I'm a bit pissed off.  After trying to wrap my head around chains and sprockets online I decided to buy locally and have a chat with the parts desk at my regional dealer.  Since it was my first time doing a chain/sprocket replacement I figured I'd pay the extra cost and get some face to face advice.

Trying to get details out of the parts-desk guy was like pulling teeth.  He seemed frustrated with my questions and didn't offer up much.  I guess the logic there was, 'just bring it in to service.'  I left paying over $300 taxes in for what would have cost me $240 online, but was none the wiser.  I was at least assured that these were the specific parts I needed.

After a series of confusing and frustrating situations, here is the advice I wish the parts guy at the dealer had given me:

The Ninja 650r uses a 114 link chain, he gave me a 120 link chain but told me this was the stock chain especially for my bike.  He's not wrong, but he didn't tell me I'd have to 'break' the chain.  Here is how I wish it'd gone down:


You're going to need one of
these to break and master
link up a motorcycle chain.
It isn't expensive (about
sixty bucks)
Parts guy: "I'm ordering you the chain size for your bike, but it comes with six extra links.  When it comes in I'll get one of the guys to break the chain so it fits your bike specifically.  If you want I'll even ask him to do it when you come to pick it up so you can see how he does it."

He could have sold me a $60 tool (probably for more) and I would have left knowing what I was getting into, instead all I got was the exasperated face.  

When I hung the chain on the bike it was way too long (it was a 120 link chain going on a 114 link bike, but I didn't know that at the time).  I had to go digging to find out why the chain 'specific to my bike' obviously didn't fit.

This experience asks a larger question about brick and mortar stores versus shopping online: why would I spend the gas and time driving there and then pay the extra 20% for the experience if I can pay less online?  If there is nothing value added in me bothering to buy at full retail locally, then why would I do it?

Second up, I wish he'd have offered me some pragmatic advice for doing my own chain work:

Parts guy: "Is this your first motorcycle chain?  It's pretty easy to mess it up.  I'd suggest going for a basic O-ring chain for your first go.  If you botch the job you're only out fifty bucks and you've learned something."

I ended up buying the bells and whistles X-ring chain on his advice, and then breaking it a link too short (after looking up how to do that on that paragon of customer support, the internet).  It's an expensive learning experience breaking a chain so that it doesn't fit my bike.  At least it's still over 110 links and a 520 sized chain, meaning it'll work on a lot of other bikes.  Now I've not got to decide whether to seal it up and wait for an ideal use or try and resell it (at a loss).

One way or another, I don't think I'll be driving down to the local dealer again for parts, I get my questions answered with more patience on the internet, which beggars belief.

Note:  a couple of days later I went online and picked up a basic O-link chain from the same Japanese chain manufacturer from
Canada's Motorcycle (35% cheaper than the equivalent chain from the dealer).  In a matter of moments the chain was on its way (free delivery).  It got here in the same amount of time it took the dealer to order it in (but I didn't have to drive down to the city twice).  I'm all for buying locally and helping out the area economy, but if local business don't realize how they can add value to a local buying experience they're going to kill it stone dead.

Note²:  maybe it's only a motorcycle dealership thing.  I went to RONA to make an order for deck parts and they couldn't have been more fantastic, same with Universal Rentals in Fergus, equally awesome customer service.  Are motorbike shops just too cool to care?

Note³: See the followup post on how to break/shorten/master link a new bike chain for how-tos. 

Wednesday 25 June 2014

Sprockets, Chains & Walls of Rain

I thought I could make it down to Guelph to order my sprockets and chain and back before the rain hit.  The weather radar said there wouldn't be rain for over an hour.  I left at 2:30 and grabbed some gas in Fergus before heading down Highway 6.  It sprinkled lightly as I went, but it was just enough to take the edge of some truly oppressive humidity.

I got the sprocket and chains sorted out at Two Wheel Motorsport.  The chain drives on motorcycles are one of the first places people play with their geometry.  If you go to look up sprockets and chains for a 2007 Ninja 650r you're buried alive in neon chains and sprockets designed to look like shuriken.  By messing with the length of chain and number of teeth in the sprocket you can essentially gear up your bike, giving it faster acceleration (though it would also be revving over 5000rpm at highway speeds).  

For my first go-around with motorcycle sprockets and chains I went with quality and longevity.  The steel sprockets I got were Afam sprockets designed and built in Europe, they are very high spec pieces.  I stayed away from anything that's neon.  If you're curious, a 2007 Kawasaki Ninja 650r takes a 15 tooth front sprocket and a 46 tooth rear sprocket (that isn't always obvious as people rush to over gear their bikes so they go 0-60 faster).  I also got an X link chain, which offers a number of advantages over an O link chain, though they are more expensive.  The high quality sprockets (front and back) and a high tensile strength chain cost me about $300 taxes in.  They should be in by the end of the week.


Something wicked this way comes!
After wandering around looking at new bikes in the showroom for a few minutes I jumped back on the Ninja and headed back north.  As I turned on to Elora Road the sky got menacing, then it turned positively apocalyptic.

I've ridden through rain a fair bit, especially last summer when I was commuting on the bike.  This one looked turbulent though.  I stopped to zip everything up and take that picture and then I drove into a wall of water.

One of the nice parts of being on a bike is how connected you are to the world.  As I rode toward the darkness I knew this was going to be more than a sprinkle.  The clouds were scalloped and black/green and the temperature dropped ten degrees as I rode under them.  Then the smell of ozone filled my helmet.  I could see across the valley ahead that cars had their headlights on and the wipers were going furiously, behind them the standing wall of rain advanced steadily.


Hosed but home.
As the first big drops hit me I hunkered down on the tank behind the windscreen.  The wind picked up and I had to lean into it to hold my line, and then I rode into the water wall.  I like riding in the rain.  The bike is surprisingly well planted and if you want your visor to clear just turn your head and watch the rain roll sideways across it.  Of course, I like it better when I'm in rain gear, which I wasn't this time.  In about 10 seconds at 80kms/hr in torrential rain I was soaked to the bone, but I was only 10 minutes from home so I could get wet.  Cars were pulling over, the end was nigh.  Trees were bent sideways and it was night-time dark.  I made it the 10 minutes up the highway and turned on to back streets.  I was in my driveway a minute later.

After getting the bike inside and towelling it off I peeled off soaked clothes.  It was the first time I wasn't hot and sweaty all day.  I love riding in the rain.

Saturday 7 June 2014

Sea to Sky and Back Again

My son and I are two up on a BMW F800ST on our way out of Sooke on Vancouver Island's south coast.  It's the last big stop before heading into the wild, and it's not that big a stop.  The road has met up with the rocky shoreline and I'm bending the bike left and right around constant corners, I'm seldom able to see more than a couple of hundred feet down the road.  From the steep hillside down to the Pacific Ocean a deer pops over the barrier onto the road right in front of us.  The BMW seamlessly comes to a stop five feet in front of the startled deer that tears off into the forest.  I wait for the inevitable follow up deer and see it next to the barrier watching us.  We pull away slowly and elect to ease off a bit and keep it under 80 kilometres per hour.  Even at speed limit speeds this road is something special.

I'm supposed to be in class, at work, instead I find myself over four thousand kilometres away from home on a cool and sunny Friday morning at the end of May with a rented motorcycle, beautiful weather and three hundred kilometres of astonishing roads in front of me, sometimes life offers up nice surprises.

I've only been riding on the road for just over a year.  I have my M2 license and I left an '07 Kawasaki Ninja 650R at home.  The BMW is only the second road bike I've ever ridden.  It's amazing how different two machines that do the same job can be.  The BMW is a bigger bike, with larger seats, it's much more comfortable according to my pillion.  The suspension is soft and supple compared to my Kawi, and the controls feel lighter.  The clutch take up is smooth and the brakes make me think I need to do the front pads and bleed my Ninja when I get home.  The BMW is a more mature bike in every sense.  The redline is a sane 8000 rpm, and with the soft suspension and big seat it's easy to ride for a long time.  Other than the weird left hand/right hand indicators it's an easy transition from the Ninja (one of the reasons I chose it).


The rider of this fine machine,
in his beaten up, old BMW
leathers was in his seventies!
We work our way down this increasingly empty coastal road until we stumble across the small town of Shirley and Shirley Delicious.  We'd been told by the technician at Cycle BC where we'd picked up the bike that the temperature can drop ten degrees on the coast, and he wasn't wrong.  After a hot coffee warm up and the best sausage roll I've ever had, we bump into another BMW rider who is in his seventies.  After some affable, Teutonic chat we are back on the long and winding road.




From Sooke to Port Renfrew,
endlessly entertaining
From Shirley we wind our way north west up the quiet coast of Vancouver Island.  The east coast faces Vancouver and is as busy as anywhere in Canada, but the west coast faces the endless Pacific and remains largely unpopulated.  From Shirley we saw only a couple of other vehicles as we chased the tail of this amazing road that clings to the side of mountains edged by ocean.  The switchbacks that lead down to single lane bridges over mountain rivers look more like Scandinavian fjords than Canadian back roads.

We stop and stretch about forty minutes into the ride at a scenic lookout, which along with many provincial parks, dot the route.  As we clear the straits between Vancouver Island and the mainland and begin to face the Pacific, tsunami warning signs and escape routes begin to appear.  You really get a sense of being on the edge of the world here.  The edge of North America, the edge of the former British Empire, facing half a world of ocean.



Port Renfrew is more an idea than an actual place; a few buildings scattered among the trees.  We pass through it in moments and find ourselves on a rough paved road into Juan de Fuca Provincial Park where we hope to find Botanical Beach.  We strip off the bike gear and stow it in the big Givi box on the back and head down the trail.  The tide is out and an amazing beach full of tidal pools awaits.


We warm up on the long walk down and soon find ourselves clambering over black stone jutting into the ocean.  The sea life is prodigious, with massive strings of clams, crabs and a million other things crawling on the rocks.  The smell of salt and sharp, clean air is magical. We're the only people we can see.


Jurassic Park has nothing on
Juan de Fuca!

We spend two hours wandering around the rocks, but I've only got the bike for the day and the sun is way past noon.  A quick uphill hike back to the bike has us both sweating.  I figure we should eat and the Coastal Kitchen on the way in looked like a good choice, but my son has a thing for chain restaurants and says he isn't hungry (though he was).  I don't get to the Coastal Kitchen, one of my few regrets on this trip.

I'm looking at my watch and wondering how I can possibly get back to Victoria since it's getting on for 2pm and we're not even halfway around our loop yet.  Lake Cowichan is halfway across the island.  It's only 63 kilometres away but this road is something else, you don't make time on it.  Around every corner (and there is always a corner) you find idyllic waterfalls, tumbling mountain rivers and absurdly beautiful alpine vistas.




Almost two thousand metres in elevation
changes, it's as uppy-downy as it's lefty-righty
The BMW is bending left and right over the patchwork surface of the road, the soft suspension soaking up the bumps.  I get into a rhythm and lose myself for a while chasing this road. 

Unlike the Ninja, I can barely feel Max back there until he uncharacteristically thumps into me as a I brake for a switchback.  He mumbles that he's ok, but we've been on the road since 9am, he's had no lunch and he's dopey, not a good combination.  I push on to Lake Cowichan, now more worried about him than enjoying the ride.  I really wish we'd eaten at the Coastal Kitchen before leaving Port Renfrew, we're not putting that to a vote next time.

We stop in Cowichan and eat lousy fast food at an A&W.  He perks right back up and we get back on the road quickly because it's getting on to 4pm and I've got less than two hours to return the F800.  But Cowichan marks the return to the populated side of the island and the highway out of it is the first 100 km/hr zone we've seen since leaving Victoria.  In a flash we're back to the Trans Canada in Duncan and, after a day spent virtually alone on twisting roads, we find ourselves in a traffic jam surrounded by box stores.  We wait our way through the worst timed traffic lights ever in Duncan and finally get moving south towards Victoria.


Even a commuter road like this makes most roads in Ontario look sad.  It's smooth (it barely snows here and frost heaves are all but nonexistent), and the asphalt constantly snakes over and around mountains.  Though very different from the west side wilderness, the highway ride back to Victoria was nice too.

At speed the BMW is surprisingly comfortable.  The tiny screen on the front had me doubting its high speed comfort, but now I understand how wind to the chest can keep your weight off your wrists.  At highway speeds you seem to lay on the wind, it's remarkably comfortable.  The minimalist aerodynamics on the F800ST do a surprisingly good job.

Once clear of Duncan we don't see another slowdown until entering Victoria, and it isn't a big slowdown.  By five o'clock we're pulling back into CycleBC's downtown shop, tired but elated.  The bike did the whole trip, over three hundred kilometres all told, on a single tank.  It also cast some perspective on my Ninja.

The BMW's suspension makes me want to look into the Kawi's, but a 650R is a very different kind of bike than an F800.  Given a choice though I'd take the BMW's buttery, compliant suspension over the teeth rattling shocks on my Kawi.  I thought the lack of a windshield would hurt the BMW but it was surprisingly good, and makes me question the turbulence I get off the aftermarket windshield on the Ninja.  The weird switch gear on the BMW wasn't convenient, but all of the controls were light and responsive, making the bike a joy to take down twisty roads.  It all sounds like a slam dunk for the BMW, but there is one place where the my older Kawasaki leaves the BMW behind.


It's pretty and capable,
but it has the heart of a tractor
After lugging that BMW engine around for a day I was happy to put it down.  At best it chugged down the road, but most of the time it sounded agricultural.  One of the reasons I fell for the Ninja was the sound of its engine, I've seldom heard anything happier.  Whereas the BMW goes about its business with conservative, grim faced determination, the Kawasaki is an eager accomplice, with a soprano's voice.  While the BMW is grumbling to its redline something magical is happening in the Kawasaki.  Happy up to 8000rpm, it dives to the 11,000 rpm redline with a euphoric banshee wail; the last half of the Ninja's rev range is something wonderful.  That it also manages to feel stronger than the BMW even though it's a much smaller lump is also telling.

I enjoyed riding the BMW, but it didn't move me.  The good news is I now have much higher standards for control feel, brakes and suspension, but without that all-singing engine I'm just not smitten.

As for the trip, it was unforgettable.  From sea to sky and back again, it was challenging, exhausting and completely worth it.  Were I to do it again, I think I'd get the bike for 24 hours instead of 8 and stay over in Cowichan before coming back the other way down the empty coast.  That road deserves two way attention, and I'd happily avoid the traffic in Duncan and the stress of trying to rush the bike back at the end of the day.  It also eat lunch at the Coastal Kitchen, damn it.  The days are long on Vancouver Island in the summer.  If you left at noon on one day, you could meander up to Cowichan enjoy a 10pm sunset and be on the road well after sunrise at 6am the next day looking forward to retracing those mad roads back to Victoria - you'd also miss rush hour on both sides.

CycleBC is located in downtown Victoria right under the conference centre attached to the Empress Hotel.  The staff are quick to get you on the road, know the area inside and out and offer up some great insider tips (why we ended up making a point of seeing Botanical Beach).  They offer a wide range of bikes from the F800ST I was on to a BMW GS, Suzuki Vstrom, Kawaski KLR, Triumph Bonneville and various cruiser options.  Everything looked to be in top form (they have an onsite technician), and the F800 was flawless for us.

If you get a chance to ride southern Vancouver Island, you won't be disappointed.  Next time I'm out there, I'm looking at a longer ride around more of the island.

Sunday 6 April 2014

Travelling Ninja




A Vicious Cycle got me the kit for the topbox mighty quick (the day before they said it would get here).  It was a quick fit and install.  With the topbox and backrest in place, my son has a much more comfortable pillion to sit on.  A Vicious Cycle makes it easy to get sorted with the right kit, letting you search by bike and get kit specific to your machine.




  
 
 The setup is very solid.  The Givi monolock seems very stable and the frame was all first rate.  There were no problems with installing it.

The 26l topbox might seem small, but for a svelt bike like a 650r Ninja, it's a well proportioned fit.

 $320 all in (including shipping & taxes) for the Kappa case, the Ninja specific mounting bracket and the Givi monolock base.


Thursday 3 April 2014

Finishing Touches

The snow is slowly receeding.  This week I was down in the city and saw someone buzz by on a bike and got all revved up.  Over the past couple of weeks I've put the Ninja back together.  It's about where I want it now in terms of looks.  It's gone from a debranded, flat black angry young man's bike to a colourful machine that knows what it is.


After it warmed up enough to get the paint sorted I sourced some stickers from The Sportbike Sticker Shop.  They arrived the day before they were supposed to in a plain envelope with cardboard backing in perfect shape ready to apply.  Since I was going for a blue and orange colour scheme and I could colour customize the Ninja stickers, I did.
  




I went for black Kawasaki logo writing for the lower fairing and 650r stickers for the front.  I picked up a Triumph sticker for the toolbox and the Japanese kanji for shinobi (Ninja).  Instead of on the toolbox the kanji ended up on the bike on the 'interesting' side (the side with the shock).  The metallic silver sticker looks great on the flat black leading into the exhaust port on the fairing.

The stickers went on well and seem to have bonded perfectly.  The site says you can clearcoat over them, so I'll do that as a final step and it'll be done.  I recommend The Sportbike Sticker Shop - you get your order quickly, it's very competitively priced and the stickers are quality pieces that look great when you get them on, just don't be surprised if you get what looks like a letter from a relative only to find it full of awesome stickers.



With any luck we'll have some heavy rain and then a 10+°C day and I'll be off on the kingfisher coloured Ninja.



What thirty bucks gets you from The Sportsbike Sticker Shop

Thursday 20 March 2014

Touring Ninja redux

I've been doing some research on a topbox for the Ninja again.  Having a permanent carrying option would allow me to make the bike more usable on long trips by giving me lockable storage on the bike.  It would also give my son a more comfortable and secure pillion with a backrest.  If I could take him with me on some extended day trips we'd be able to make some miles this summer.

I'd initially thought of getting a bigger bike for two upping with my son, but the cost of insurance on larger cc bikes for new riders and the doubling up of insurance when you own two bikes (though you can only ride one at a time) has put that on hold.  In the meantime, perhaps some storage on the Ninja would make it a bit more useful as a tourer.

Givi is pretty detailed in how to apply its luggage to my particular Ninja.  I went to them first to figure out what the hell the difference between monolock and monokey luggage is.  Basically, Givi monokey is the heavy duty kit and monolock is the light duty system.  Monokey can be switched between top and pannier duty as well as being built heavier and tougher.  Monolock is topcase only and meant for smaller bikes doing lighter duty.  Think monokey for a big touring bike with lots of luggage and monolock for sports bikes, smaller bikes and scooters.




Givi suggestions for a Ninja 650r '05-'08:
http://www.giviluggage.co/givi-product-focus/bike-overview-kawasaki-er6-nf-05-08/





What I need for the Ninja Topbox:


Not bad for turning the Ninja into a two up tourer and long distance traveller.  I see some Givi luggage coming from A Viscous Cycle in the near future.

Sunday 16 February 2014

Rich Man Poor Man

I think three bikes would comfortably fit in the garage with room to work.  I'm hoping I can find an insurance deal that lets me run more than one bike without insurance doubling each time.  

If I were to go with three, these would be my poor man/middle class man/rich man choices:



Three of a kind: the low budget option



Keep the current '07 Kawasaki Ninja 650r. I've already cleaned it up and it's got tons of life left in it.  It's the obvious choice for a sport/track day bike.  I've still got a lot to learn from it as far as sport riding goes.






This '86 Kawasaki Concours caught my eye last summer.  It's up for sale again on Kijiji.  For only two and a half grand I'd have a capable touring bike that would comfortably carry two up over long distances.  It has a lot of miles on it, but it looks like it has been meticulously maintained. If I could swing it, I'd get it.






I just stumbled across this '02 KLR650 on Kijiji.  The price isn't listed, but with any luck I could pick it up for about what the Concours above cost.  It's fuggly, but if it would be a simple matter to strip it and repaint it.

I should be able to pick up both bikes for under five grand.  They all happen to be Kawasakis, three of a kind.


Total cost:  ~$5000

Shopping for favourites: the reasonable budget choices




I'd probably still hang on to the Ninja in this scenario, but I like the look of naked street bikes more than the fully faired sport bikes.  if I were to go for an athletic street bike I'd consider the FZ-09 from Yamaha.  It's surprisingly affordable, super light, and looks great in Orange.  
~$10767





The touring option would get three wheel funky at this level.  I'd go for a Royal Enfield Classic 500 with a sidecar.  As a way to share riding with my son, it's a fun way to putter around.  We'd have to get some vintage style helmets with googles.  ~$12000








The dual sport choice would be a new Kawasaki KLR650, specifically this very KLR.

~$8700



Total: ~$31500 (taxes included)

       or $20733 if I keep the Ninja



Big spender: the cost no-option choices

I keep hearing about how utterly awesome the Triumph Street Triple is, so if money weren't an option this would be my naked/sport choice, the top-of-the-line R version.
~$13800
If nothing else the Triumph Configurator is fun to play with.



The Explorer below is an excellent two up bike, so it could do the job, but if cost is no problem I'd consider a Soviet style Ural sidecar outfit.  The Ural Gear-Up is an on-demand 2-wheel drive no-nonsense rig with classic military styling.  It could also handle off road duties when needed.

~$16553




For the dual sport option I'd be looking to Triumph again.  Either the Triumph Tiger 800XC or the big Triumph Tiger Explorer XC.  Since the big bike actually gets the same mileage as the little one, I think I'd go with the distance machine.  It's big, but I'd train off road and ease into using it that way.  I'm a big guy, I'll manage it.

~$22000

Total $52353 (taxes included)


You gotta love motorbikes, even the rich-man option that gets you three distinct imports costs less than a Volvo SUV.