Tragic Emptiness, New Possibilities

...and then there was one.

The Ninja was gone in six days, sold the first weekend I had it up for sale.  If you're looking to move your bike, prep it for spring and wait for the temperatures to promise spring, you'll have a quick sale.

I was asking $3900, but figured it would need some work done to safety, so I had a $500 cushion in there.  It went for $3200 as is, no extra cost on my part.  I'm happy with that, I bought it for $3500 safetied two years ago and put four thousand miles on it.

I've spent the last couple of days putting time into the Concours, getting it ready for launch...

I need to put some miles on this bike so I can begin believing that I can trust it.  I took it around the block today to warm up the final drive before changing out the fluid - that's the last fluid change on the bike, everything is new and synthetic now.

Around the block to warm up the final drive oil, and now it's changed with synthetic.  First time in that new jacket and
helmet too.  Both feel like quality compared to the bargain basement stuff I started with.

I'm still wandering around online looking at a very different second bike.  The KLX250 is on my short list now after seeing that one with a big bore kit.  We did our bike course on Yamaha 250s and I loved how light and flickable they were.  Having a small enduro would be the night and day difference I'd be looking for in having two bikes, not to mention it'd be very cheap to run.  If I had five grand laying about, I'd chuck it at a new one.

I suspect the Concours will need more TLC than the Ninja did, but if it turns out to be pretty bullet proof, a second bike with character could be this interesting '70s Yamaha.  I'd be able to get my scrambler vibe on with that!

650cc Air Cooled Triumph Bonneville Exhaust and Seat Options

More 1971 Triumph Bonneville restoration project research (all prices courtesy of BritCycle):

High pipes:

721-T74X exhaust pipes - $304.51/pair.
711-709669/9670 mufflers - $486.00/pair.
2x 742-158 clamps - $16.61 ea.
70-9673 “H” connector - $72.28.
2x 742-112 clamps - $16.61 ea.

TOTAL:  $930

Plus associated bracketry and hardware, etc if needed. The one item we’ll have difficulty sourcing will be the ‘chip basket’ heatshield; our manufacturer of those long since retired.

Looking like Steve McQueen on a scrambler styled Bonneville costs extra!  Britcycle said they might have some scratched and dented options on sale, but those aren't regular stock (obviously).

Stock(ish) exhaust system:

721-T79 exhaust pipes - $289.02/pair.

712-102 Dunstall decibel replica mufflers - $330.32/pair.
70-9888 balance tube - $29.09.
2x 742-138 clamps - $16.61 ea.

TOTAL:  $683

What I'd really like to do is form my own pipes, but I don't have the space, equipment or time to do that.  For this project I think I'll use it as a learning process and get this particular Bonneville cleaned up and mechanically sorted and leave the radical customizations to a future time when I'm loaded, have lots of free time and a much bigger workshop with a full range of tooling in it.

I think stock is the way I'll go on exhausts...

As far as seats go, BritCycle has just the sort of thing I'm looking for: 

  

Custom Seat, 71on T120, Clip Type

Part Number 513-05

The only thing that might knock it out of contention is if, price and fit-wise, Corbin's customizable seat is in the ballpark.  It says they might fit a '71 but they're mainly for '72 Triumph twins and up.

Quality (made in England) newly manufactured seats specific to the oil in frame 650 twins run at about $500US ($612CAD) - I'm not sure what Britcycle's go for.  The customizable (and probably higher quality) Corbin is $618US ($788CAD).  There are cheaper options manufactured in India & China to less exacting standards to consider too.  I'll be keeping that all in mind as I juggle seat options and make a decision.

Carbon KLX

Never a fan of the sticker covered MX look, I don't care for
big, white, fridge-like panels designed to take numbers.

I can't seem to own a bike without re-imagining it.  The Ninja went from flat black to blue and orange.  The Concours is continuing a transformation into gold and crimson.  Now it's the KLX's turn.

The white plastics on the KLX look cheap, appliance-like and nasty.  To rectify that I started looking for carbon pieces but they tend to be focused on sports bikes and I couldn't find any KLX sets.  

I then looked for replacement plastics I could experiment with, but they aren't cheap.  My next stop was sticker sets, which tend to be even more juvenile than the original graphics set-up (though the black metal one looked alright).  Why is everyone fixated on death imagery (skulls, bones, flaming effigies, etc.) on motorcycles?

A short term fix is to just focus on the offending pieces
(the headlight surround, fork protectors and rear side panels).
Amazing how five panels makes the bike look so different.

Longer term I'd like to learn how to form carbon fibre panels, but short term I've found a number of cheaper fixes to my aesthetics problem.

Canadian Tire sells the Dupli-Colour carbon fibre kit for about forty bucks.  It comes with two colours and a patterning cloth.  I should be able to sort out the natty white panels (two front fork guards, the headlight surround and the rear side panels) with that kit.  It's a cheap, short term fix.

I was reading about a vinyl wrap project Performance Bike UK was doing last night.  They did the whole bike in vinyl, but you can pick up carbon fibre look vinyl for next to nothing.  Maybe I should try that instead of the paint.  After some looking up on Amazon.ca I found some carbon fiber look vinyl wrap that will let me try out what PB did with their Suzuki on a smaller scale.  I also found some mirrors on hand that are much less derpy than the stock KLX mirror, and the

$45 for shipping on a $27 part?  Really Amazon?

price seemed reasonable until I got to checkout - this Amazon 'retailer' is charging $45 in shipping for a $27 part.  They can't be selling too many of those.  Fortunately I found a similar mirror with reasonable shipping costs and ended up getting a body colour mirror, 4 rolls of carbon look vinyl and a vinyl applicator for the same price as that over inflated shipping price, taxes and delivery included.  Amazon is no longer Amazon, it's a whole bunch of sometimes shady online sellers.  It's more like ebay than Amazon of old.

With more cash on hand I'd like to swap out knobblies for something more road focused and dualsport/scramblery.  Having the knobblies around for intentionally deep off-roading will be good, but I think I'd use the bike a lot more if I could get places without the tires slapping the pavement like wet squid suckers.

Canada's Motorcycle has Shinko 705s in the right sizes for under one hundred bucks each.  Two hundred and fifty bucks in and my carbon fibre KLX will be a step closer to the more road friendly scrambler I've been dreaming of.







Further research unearthed some pretty cool options.  This twin light headlamp seems pretty Airwolf cool.

Acerbis does a variety of front ends for enduro/dual sport bikes, like this Cyclops one.  

How to Pick a Project Bike

I'm still wallowing in the sense of satisfaction from taking an old, field-found Concours and putting it back on the road again.  With a road-ready bike in the garage I'm looking for another project bike.  I'm not short on choices, a quick look online revealed a wide variety of 'project' bikes; apparently a lot of people start them and don't finish them.  You can pick up failed projects that run the gamut from boxes of bits to a machine that just needs a bit of TLC.  I'd think you have to feel like a real burk if you bought a bike, dismantled it and then walked away from the mess you made, but people do it.  I'm left wondering if some people start projects just to waste time rather than aiming for a finished product.

Knowing which bike to pick is a big part of selecting a workable project.  The Concours was owned by an older fellow who knew what he was doing and fully intended to ride the bike again.  It wasn't stored properly or used, but the attention paid to it was knowledgeable, making it a good choice for a project.  I was able to hear it running and even rode it home, so I knew what I was getting into.  

The Connie is also a popular bike with a huge online community.  The ZG1000 Concours I have was in production from 1994 up until 2006 and '86 to '93 in a previous, similar generation.  A lengthy production run means lots of parts out there.  I had no trouble finding both new and used parts for it and getting advice was as easy as logging into the Concours Owners Group or referring to the easily found shop manual.

As a starting project the Concours was a good choice.  For my second project I'm looking for a bit more of a challenge.  Just north of me a 1989 Suzuki DR600 Djebel came up for sale, menacingly suggested as a project bike.

The DR600 evolved into the DR650 in 1990.  DR650s are still in production today, but the DR600 was quite a different machine.  After doing some digging on the interwebs I discovered that finding parts for it might be a real problem (one Suzuki dealer said there was no such bike).  There is no shop manual available from any of the usual publishers and the only thing I could find that was close was a photocopied PDF of a 1985 model from a guy in Australia.  The bike was available in continental Europe and Canada, but not the UK or the US, so I'm looking at a long out of production bike that was never sold in the largest market in the world.  This didn't stop me from going up to look at it though.

The DR600 is a huge trailee machine.  The young owner had the ownership, but it was still in the previous owner's name in spite of the bike being in his possession for a couple of years; the project had obviously gone stale.  The amount of rust on fasteners suggested that the bike had been left in the weather for at least some of the time.  It won't run, rust in the tank and fuel system was the diagnosis.  Aftermarket tanks are pretty easy to find for off road bikes (and look very Mondo Enduro), but there are none specifically for the DR600.  A DR650 tank might fit... might.

A non-running machine means you're missing a chance to get a sense of the internal workings.  You're probably walking into a complete engine rebuild if the bike has had rust force fed through it during two years of failed diagnostics.  An unplugged speedo cable and loose, corroded wires also raise questions around the accuracy of the mileage as well as the potential for annoying electrical issues.

I'm looking for a challenge, but the Djebel (an Arabic mountain!) is one I'm too cautious to climb.  If I'm a decade in and have wrenched a lot of bikes, I might have taken a swing at it, but not when the asking price is similar to a ten years newer, running KLR650.  I still had to fight my mechanical sympathy which was tugging at me to take the bike home and make it whole again.

So, I'm still looking for another project bike.  An '81 Honda CB400 came up nearby for half the price of the Suzuki.  Also not running, but a much more popular machine that isn't a problem for parts availability or service manuals.  Stored inside, it looks like a good candidate for my first rebuild.  It also looks like a good choice for a more complicated customization.  A CB400 Scrambler would be a sensible evolutionary step in bike builds for me.

Riding In the Desert On an Iron Horse with No Name... for reals this time

I've been through the desert on a lousy rental car with no name,
now I'll do it properly on two wheels!

I landed a free trip to Arizona a couple of years ago for an educational conference.  I'd never been to the desert before, it was a great trip but the cunning plan to rent a bike fell apart when I discovered they don't rent over the Easter weekend when I was flying in.

Ever since driving a lousy Nissan rental car through the Superstition Mountains, I've wanted to go back and do it properly on two wheels.  My time has come!

We're doing a family trip to Arizona over the Christmas break.  Opportunity never knocks twice, except when it does, like this time.

Eaglerider's selections look all of a kind,
a kind that doesn't really grab me.

Eaglerider has a huge selection of bikes, but AZ Ride has exceptional customer ratings.  I'll end up looking into both and seeing which grabs me.

AZ has the Indian Scout, which tickles a fancy (riding in the desert with an Indian Scout, c'mon!), along with the ZG1400 Concours, which I'm curious about for obvious reasons.  

Eaglerider has a lot of Harleys and a smattering of other very heavy offerings from other manufacturers.  In other locations they offer Triumphs but not in Phoenix.  Scraping floor boards doesn't make me think of spirited riding, it makes me think of a poorly designed motorcycle.  Lugging a massive hunk of iron that can't corner around the desert doesn't strike me as a good time.

Looking at what's on offer, and taking into account the customer ratings on Google, I think I'll be giving AZride a go.  They're both up the right end of Phoenix to get to easily, so location isn't a factor.  I'll be aiming at a Concours if my son wants to come with or the Scout if I'm solo, then it's off into the Superstition Mountains for a day... or is it?

309kms/192 miles, with that many bends should make for a good day of riding

The road to Roosevelt is something else.  I skipped it in the Nissan rental car, but on two wheels it might be reason enough to live in Phoenix.  It's about 80kms of serious switchbacks through breathtaking high desert, except it's a dirt road!  All my day dreaming about riding switchbacks of smooth Arizona tarmac aren't happening unless I go the long way around and stay on paved roads.

Once up on the plateau I'll make a point of stopping at the Tonto National Monument, which is a magical place.  The ride back down the other side offers a couple of nice stops, but also some tedium.  If that road to Roosevelt is as magical as it looks, I might just come back that way.

How do you say no to a road like that?  AZride has a BMW 800GS Adventure, but a ride like this would be the perfect time to try the new Triumph Tiger Explorer - alas, no one rents it.  I've been eyeing the 800XCx as well as the new Explorer, but no one rents 'em.  There is a Triumph dealer in Scottsdale.  Think I could convince them to let me have a 300km test ride along that crazy road?

*** 

In a more perfect world I'd rent bikes I'm curious about owning.  A short list would include:

The new Triumph Bonneville with the Scrambler package (favourite classic) - It'd also look awesome in the desert!

A Kawasaki Z1000 (favourite naked bike), though Kawi just came out with a Z800, which I'd also like to have a go on - but I'd be trapped on pavement.

The Kawasaki H2 (because it's bonkers) - but not so good on a dirt road in the high desert...

The Ariel Ace (because it's sooo pretty) - but I suspect it lacks off road chops.

I'm in a conundrum now.  I really want to ride out of Apache Junction on the Apache Trail, but the bikes I want to ride are all pavement specialists while the adventure bikes I'd want to rent aren't available to ride.

Meanwhile Triumph cruelly taunts me with their lovely new machines.

Damn it!

FOLLOW UP

Instead of turning left before Globe,
head on towards Show Low.  The
roads be magic there!

All is not lost.  If we're on pavement for the ride there is a nice triangle that'll make for a fine high-desert ride.  The road north out of Globe into the higher mountains looks like a corker too.  I don't think I'll be suffering too much if I can't ride the Apache Trail.  Either of those would be a blast on a big Connie.

Now to find a day when the weather is cooperating and see if I can make this happen.

Motorcycle Photography

Some recent photos that caught my eye from the digital motorcycle magazine and book realm.

Adventure Bike Rider is pretty ace with the off the beaten path photos.  BIKE magazine does the business as well.

One of ABR's more extreme trips: Germans riding in Oman

Riding in Borneo

 

Ducati Scrambler... vroom vroom!

How rim size matters... courtesy of  Total Control: High Performance Street Riding Techniques....
so far an accessible and in depth look at all aspects of motorcycle riding and vehicle dynamics

ABR does nice photography!

Kawasaki's 600cc supercharged maybe

Riding the Alps

BIKE magazine at the Bol D'Or, 2015

The new Ninja

Riding in Nepal

Yamaha's FZ-09: the universal bike?

Since having the dream of a stable of bikes mangled thanks to the cruel calculus of insurance companies, I've been thinking about putting my eggs all in one basket.  In looking over this year's offerings one really stands out for me as a bike I could develop a long term relationship with.

What I'm looking for is a bike that offers a standard riding position so it'll take to a variety of riding tasks.  I like the look of a naked bike and I'm a fan of efficiency, so light weight is a must.  So, an all-round naked bike that's light on the scales, fits a big guy well and is dependable so I can make some miles on it.

Fortunately Yamaha has come out with the FZ-09, and it checks a lot of boxes.  At a light-weight 414lbs and with a strong three cylinder engine, it's a step up in power from the Ninja without heading into litre-bike territory.  It's standard riding position offers much less lean and deeper pegs for my too-long legs.

While the 650R is a sport-tourer, it sill puts me into
much more of a crouched riding position.  I enjoy
the bike, but creak when I get off after a long ride. If
I'm carving up corners, it's a beast.  If I'm trying to
make some miles?  Not so much.

An almost 1 inch taller seat, barely any forward lean
(11° less than the Ninja), 4% less bent knees, and
14% less crouch.  An all purpose bike that
fits nicely?  I hope the FZ feels as good as it should.

That 414 lbs means the FZ-09 comes in 26lbs lighter than the Ninja, and it manages to do it while carrying one more cylinder and an additional 200ccs.  The FZ is even 16 lbs lighter than a KLR, which makes me wonder what a scrambler FZ might look like.  With some knobbly tires, wire wheels, longer suspension and guard, there aren't too many places it couldn't go.  RTW on an FZ?  Perhaps!

Is there such a thing as a universal bike, maybe the FZ is it...

And it even comes in orange!

There isn't much I wouldn't do for an athletic red-head...