Showing posts sorted by relevance for query connie. Sort by date Show all posts
Showing posts sorted by relevance for query connie. Sort by date Show all posts

Thursday 31 March 2016

Evolution of Motorcycle Ownership and a Triumphant Return

Back in August of 2014 I wanted to take a more active role in my motorcycle maintenance.  At that point I'd been riding for just over a year on my first bike, a very dependable 2007 Kawasaki Ninja 650r.  I learned a lot on that bike, but it was a turn-key experience, the bike needed very little in the way of maintenance.   

The Ninja went from flat black to metallic blue and orange.  It was the last bike I rode that people commented on (I'd often get a thumbs up or have someone stop and chat in a parking lot about how nice the bike looked, which was satisfying as I'd been instrumental in restoring it from angry-young-man flat black).  The Ninja was, without a doubt, a good introduction to motorcycling, and was the king of the roost for my first two seasons.


As a first bike, the Ninja led the way both on the road and at the top of the blog.

I wanted my next bike to be one that ran because of my mechanical skills rather than one that didn't need them.  I found a 1994 Kawasaki Concours sitting in some long grass about twenty minutes away.  I quickly discovered that sense of satisfaction I was looking for.  The Concours was an eager patient who rewarded a winter of mechanical work with a rock solid five thousand miles of riding the next summer.

The Concours has offered some memorable rides, especially looping Georgian Bay and riding on the Indianapolis Motor Speedway.  For a bike that looked like it was being permanently parked with only 25k on it, suddenly it was back in the game, going places other bikes only dream of.

That busy season of long rides took its toll on the Concours though.  It isn't a spring chicken and after having spent the better part of two years parked before I got to it many of the soft parts on the bike were getting brittle.  I parked the Concours early and began winter maintenance knowing that the bearings and brakes both needed attention only to miss out on a late season warm spell at the end of November and into December.  I took that one on the nose figuring that's what happens when you ride an old bike as your daily rider.


The header on this blog for the past eighteen months, but running a twenty-two year old bike as your daily rider
makes for frustrations.  Time to be less sentimental and more rational in how I manage my stable.

That summer we were touring on the Concours I picked up a KLX250 to experience off road riding, but doubling insurance costs for a bike that I only managed to get out on a handful of times didn't feel very efficient.  That I struggled to keep up with traffic on it didn't support the way I like to ride.  Motorcycles are open and unprotected, but they are also agile and powerful enough to get out of a tight squeeze - except when they aren't.  The Concours was always there and the preferred ride, owning the road when I was on it.  When I went out with my co-rider he also loved the big red Connie, not so much the rock hard, under-powered KLX (he only ever rode on it once for less than five minutes).

Over the winter I put some money into the Concours, doing up the rims and getting new tires.  With the rims off I also did the bearings and brakes.  As everything came back together again, suddenly the carburetors weren't cooperating.  They're since being rebuilt and the bike should be back together again this weekend, but instead of always being there, suddenly the Concours wasn't.  As winter receded I could hear other bikes growling down the road, but I was grounded (again), even though I was paying insurance on two machines and longing to get back out on the road after an always too long Canadian winter.

The KLX was the first to go.  I'd never really bonded with it and, even though I always figured I'd run this blog with my most recent bike in the graphic at the top, the KLX never made it there; it never felt like the main focus of my motorcycling.  In the same week my son's never-ridden PW-80 got sold, and suddenly I had some money aside.


Ready to go with a new header, but it never took.

As days of potential riding keep ticking by and the carburetor work drags on, the Concours started to feel like an expensive anchor rather than the wings of freedom.  I had a long talk with my wife about it.  She asked why I don't unload it and get something dependable.  Keep the old XS1100 for that sense of mechanical satisfaction, but have a bike that's ready to ride.  I think sentiment was paralyzing me.  Hearing a rational point of view with some perspective really helped.
Many moons ago,
a pre-digital Triumph

With cash in an envelope I began looking around.  Before Easter we weathered an ice storm, but only two days later it was suddenly in the teens Celsius and bikes could be heard thundering down the road.  Meanwhile I was waiting for yet more parts for the Concours.  Online I was looking at sensible all purpose bikes that would fit a big guy.  Vstroms and Versys (Versi?) came and went, but they felt like a generic (they are quite common) compromise, I wasn't excited about buying one.

Since I started riding I've been on Triumph Canada's email list even though I've never come close to owning one (out of my league price-wise, no one else I know had one, no local dealer... pick your reason).  As a misguided teenager I purchased an utterly useless Triumph Spitfire, and in spite of that misery I've always had a soft spot for the brand (your adolescent brain makes your teenage experiences sparkle with emotion even when you're older, that's why we all still listen to the music from our teens).


A Tiger?  On Kijiji?  Must have
escaped from a zoo!
While trawling around on Kijiji looking at hordes of generic, look-a-like adventure bikes I came across an actual Tiger.  It was (as are all Triumphs I've mooned over) too expensive for me, but that Lucifer Orange (!) paint haunted me.

Another rare warm afternoon wafted by with the sounds of motorcycles on the road so I thought, what the hell, and emailed the owner.  He'd been sitting on the bike for the better part of two months with no calls.  He was going down to the Triumph dealer on Thursday to trade it in on a new Street Triple and knew he was going to get caned by them on the trade in price.  He emailed me back and said if I had three quarters of what he'd been asking, he'd rather sell it to me than give the dealer the satisfaction.  Suddenly this fantastic looking machine was plausible.


The garage is 100% more functional than it was last week,
100% more glamorous too!
A trip up to Ontario's West Coast and I got to meet a nice young man who was a recent UK immigrant and a nuclear operator at the Bruce Plant.  The bike was as advertised (well looked after, second owner, some minor cosmetic imperfections), and suddenly I owned a freaking 2003 Triumph Tiger 955i!

Most used bikes offer up some surprises when you first get them, and they usually aren't nice surprises.  The Ninja arrived with wonky handlebars the previous owner told me nothing about.  The XS1100 arrived with no valid ownership, something the previous owner failed to mention during the sale.  So far the Tiger has had nice surprises.  It arrived with a Triumph branded tank bag specific to the bike.  Oh, by the way, the previous owner said, the first owner put a Powercommander on it, and then he handed me the USB cable and software for it.  It had also been safetied in October, less than two hundred kilometres ago (paperwork included), so while I didn't buy it safetied, it shouldn't be difficult to do.  The bike has fifty thousand kilometres on it, but I then discovered that the first owner did two extended trips to Calgary and back (10k+ kms each time) - so even though it's got some miles on it, many of them are from long trips that produce minimal engine wear.  After giving it a clean the bike has no wonky bits under the seats or anywhere else.  I cannot wait to get riding it.



So, here I am at the beginning of a new era with my first European bike.  I've finally picked up a Triumph from the other side of the family tree (the bike and automobile manufacturing components of Triumph split in 1936), and I've got a bike I'm emotionally engaged with.  It might even be love!  Like the BMW I rented in Victoria, the controls seem to fit my hands and feet without feeling cramped and the riding position is wonderfully neutral.  When I'm in the saddle my feet are flat on the ground - just. Best of all, I don't look like a circus bear on a tricycle on it.


With the Concours officially decommissioned and awaiting (what are hopefully) the last parts it needs before being road worthy again, it's time to update the blog header:



What's next?  The Concours will be sold with only a modicum of sentiment, the Tiger will be safetied and on the road (it cost $90 a year more than the Concours to insure), and I'll enjoy having an operational, trustworthy machine made in the same place I was with lots of life left in it.  The fact that it was getting me thumbs up and one guy stopping to say what a nice bike it was when it was on the trailer on the way home doesn't hurt either.  Riding a tiger has a certain magic to it.

When I want to turn a wrench I'll work on the XS, getting it rolling again for the first time in years.  I'll get the ownership sorted on it (affidavits are required!) and eventually sell it without losing a penny, and then I'll go looking for my next project bike.  Maybe a scrambler Versys, maybe an old Interceptor, maybe something I haven't thought of yet.


Time for some unbridled Tiger enthusiasm!


Tyger Tyger, burning bright, 
In the forests of the night; 
What immortal hand or eye, 
Could frame thy fearful symmetry?

In what distant deeps or skies. 
Burnt the fire of thine eyes?
On what wings dare he aspire?
What the hand, dare seize the fire?

And what shoulder, & what art,
Could twist the sinews of thy heart?
And when thy heart began to beat,
What dread hand? & what dread feet?

What the hammer? what the chain, 
In what furnace was thy brain?
What the anvil? what dread grasp, 
Dare its deadly terrors clasp! 

When the stars threw down their spears 
And water'd heaven with their tears: 
Did he smile his work to see?
Did he who made the Lamb make thee?

Tyger Tyger burning bright, 
In the forests of the night: 
What immortal hand or eye,
Dare frame thy fearful symmetry?





Thursday 13 May 2021

Concours Arts & Crafts

It's arts and crafts weekend with the new bike (and a bit of light maintenance changing the gear oil in the final drive.  Here is the list of things to do in the get-it-back-on-the-road plan for the Kawasaki Concours 14:

Solve the top-box situation

I've never had a fancy, colour matched top box before.  The one that came with the Connie is a Givi-based device and I have another Givi box that would slot right in there, but I want the fancy back.

How to get the fancy back?  The stock one broke off when the former owner tipped over a in a parking lot and snapped it off.  It broke one of the bars that hooks into the base and cracked the other.

To solve the breaks and restore the bike to normal removable top-box function I'd need to replace the broken tab.  The former owner threw a couple of bolts through the bottom into the frame mount, but this leaves two bolts poking out if the top box is removed and means the top box is basically permanently attached to the bike, which isn't ideal if you're heading into a hotel for the night when on the road.


The solution was to take  some steel frame and bolt it to the bottom of the top-box while poking it through the hole so it would act as the broken off tab.  The Dremel helped me clean up the holes and the steel frame fit snugly through the break.  I bolted it to the bottom of the case with low profile stove-style heads so they won't interfere with the base and then used Gorilla construction glue to seal it all.  Once it's dry I'll sand it down and paint it flat black and then it should be back to regular service.

I'm very happy with the final results.  I used the Dremel to round the metal tab I made so it matches the stock one and the box slides on and off like stock.  The Gorilla construction glue sealed very strong and securely.  Painting it all flat black makes it all but invisible, not that anyone would see it on the bike anyway.


Solve the paint scratches from the drop

The ColorRite package arrived this week with the suggested touch-up paints for this particular Neptune Candy Blue version of the C14.  It's a beautiful paint job and so the touch-up requires a base coat, the Neptune Candy Blue and then a clear coat on top.

I also picked up some 'Flat Super Black' that should cover the ding on the bottom body panel.

With some steady hands I should be able to minimize the scratches and then buff it into the regular paint work.  It won't be perfect but I think I can cover the worst of it to the point where it's not immediately noticeable.

None of the damage cracked any of the plastic body panels which is incredible considering the weight of the bike.  A bit of touch up and it'll be barely noticeable, especially as it is only at the bottom of the side panels.  All the higher up/more obvious panels look brand new.


If I end up hanging onto this one for a long time I'll eventually get the panels repainted but this was never meant to be an on--a-pedestal bike so I wasn't so worried about some scratches on the body work.

UPDATE

I dremelled down the rough edges from the bike's slow speed drop by the previous owner.  I then ran some fine grit sandpaper over it to flat it.  It isn't perfect but it's much better than it was.  The base coat from ColorRite is designed to darken the naturally light colours plastic so when the Candy Neptune Blue goes on over top it's not also trying to cover up white plastic.
I didn't go for the spay cans from ColorRite because the cost of shipping them was staggeringly expensive (pressurized containers make shippers nervous).  If I'd have ordered the spray bombs the cost of shipping would have been more than the paint itself.  Rather than dropping a couple of hundred dollars on a patchy fix I think I'm going to get these to the point where they aren't obviously damaged and then at some point in the future pull the panels, clean them up and send them out for a professional paint job.

Painting is one of those things that works best with the right kit, and in my tiny garage the opportunity to set up a paint booth simply doesn't exist.  While doing these touch-ups, spring is in full bloom outside and in a matter of minutes everything was covered in pollen.  Things like that make painting very difficult.

In retrospect I should have just cleaned up the damage and painted it flat black for now.  The pens ordered from ColorRite are great for filling in a scratch but damage of this scale isn't what they're designed for.

On the upside, the damage is much less noticeable now.  The other paint I ordered was the 'super flat black' that goes on the lower panels.  After cleaning up that lower panel I discovered a couple of cracks from the drop.  I've sealed them with Goop Automotive Adhesive, which I've used before.  This stuff dries black, is incredibly strong and bonds to everything.  Any time I've done fairing repairs this adhesive hasn't just repaired the break but made the fairing stronger in the process, I highly recommend it.

I wish the paint pens had worked better but I'm not surprised that they didn't, it isn't what they're designed for.  With the body worked neatened up I'm more focused on getting the mechanical repairs (the damned clutch!) sorted and getting the bike on the road with all the maintenance .  Making it pretty can come over next winter.





Monday 10 May 2021

Kawasaki Concours 14 Project Updates: Easy Fob Battery Swaps and clutch gaskets


The battery in the fob for the C14 Concours is an easy DIY thing to do.  Pop open the fob (there is a hole at the front that you can slip a flat headed screwdriver into and then pop it apart.


It takes a 2025 lithium battery which you can find anywhere, I found this one hanging up in a Shoppers Drug Mart.  Pop out the battery, pop the new one in the slot (make sure the negative side is up), and snap it all back together again.  It took all of two minutes.  No reason to send that job to the dealership.



Meanwhile, having finally gotten the clutch bled and working properly, it promptly started leaking.  I think it wasn't before because it had run almost dry (the rubber cover in the fluid reservoir was sucked right down).

I've ordered a replacement gasket from my local dealer.  It was $14 including taxes and I should be able to pick it up in a couple of days in a curbside pickup.  There are benefits to having the dealer for this bike only fifteen minutes down the road.

You can see the drip lower right in that photo.  It should be any easy install but then I get to bleed the damned system again.  I'm hoping that the process I worked out last time produces quicker results this time.



You can see the rubber gasket on the back of the clutch cover in this photo.  It's three bolts and the whole thing should slide off.  The fluid was so contaminated last time that maybe this is a good thing - a chance to clean it all up inside and out.

I'm hoping to have the clutch sorted by the weekend and then sort out the safety and plates next week (assuming that's possible in COVID-riddled Ontario).

I'm looking forward to getting the Connie in motion again, it's been stationary too long.  Bikes are like sharks, if they don't keep moving they die.  Once this barely broken in (only 31k kms) Concours is in motion again I imagine it'll stay in motion for a long time.


Monday 7 March 2022

First Ride of the 2022 Season: Scratching That Itch

Imagine having an itch you can't scratch for 112 days.  Riding a motorcycle in Canada is an ongoing act of stoicism.

It was a long one this Canadian winter.  I'm usually able to get out for a cheeky February ride, but not this year in Ontario. Winter started later but when it came it clamped down on us like an angry professional wrestler and didn't offer any breaks from Polar Vortexes and snow.  My last ride was mid-November, it's now March.

T'was -22°C on Friday and tonight we've got freezing rain and snow into tomorrow, but it was a balmy 6 today so off I went.

The C14 started on the first touch and was bullet proof on a 30km ride up and down the Grand River:


The bisons were out at Black Powder.

It was mennonite o'clock as I shook the cobwebs out of the Connie.




The Tiger took a bit more convincing but that wasn't its fault, I'd had the whole fuel injection system out for a cleaning and it needed to get represussurized.  Once it had fuel it took off like a rocket!



Leaning into a corner, finally!

The zipper replacement on the jacket is working like a charm!

The roads were thick with sand and salt so after a cleanup everyone is back under a blanket waiting for the next break.  I'd be a year rounder if I still lived in Norfolk (UK).



On the upside, the 750cc cylinder head for the 71 Bonnie project came in so I've got other things to do!

On bike photos were taken with a Ricoh Theta camera attached to the windshield and auto-shooting every 8 seconds.  If you're curious, here's a bit on how to make awesome on-bike 360 photos.  Here's another published on Adventure Bike Rider Magazine in the UK:  How to capture 360-degree photos while riding your motorbike.

Looking forward to leaning into more corners in less than another 112 days!

Saturday 13 June 2015

Around the Bay: Part 4, the kit

900 kms in a day and a half led me to some consideration of the kit involved in this trip:

THE BIKE

First up would be the bike, in this case a Connie I picked up in a field late last summer for eight hundred bucks.

After a winter of repairs, it safetied in April and I've since put on almost two thousand miles with nary a complaint.  It starts at the touch of a button and feels much more substantial than the 650 Ninja I had before.  It also continues to surprise me with its athleticism.


As a long distance bike its comfortable seat and upright riding position (greatly aided by risers on the handle bars installed by the previous owner) make long rides very doable.  It'll manage about 40mpg in regular use and gets up into the mid-forties on the highway at a brisk pace, giving you well over 200 miles to a tank.

I miss the lightness of the Ninja (the Conours weighs over two hundred pounds more than the Ninja did), especially when I do something stupid like ride the Concours into deep sand, but it handles two up riding with ease and still wants to play on winding roads.  As a compromise it's a great piece of engineering that still has soul.  

RIDING GEAR

The Helmet

I picked up a Bell Revolver Evo Warp (!) helmet during the winter.  I tried it on my first trip of the year and it was AGONIZINGLY PAINFUL!  Since then I've had at the inside of it, removing the snap buttons from the padding around the temples.  Without the hard buttons pressing through the padding into the sides of my head like a torture device this helmet has suddenly become very wearable for long trips.  It managed the Georgian Bay run with no pain, though it is heavy and noisy wind-wise.  It looks a treat though.

The perfect helmet? Full face when
you need it, open when you don't.
I'm still looking for the perfect lid.  I enjoy the view and lack of claustrophobia in an open faced helmet, and the better ones seem to offer good wind protection too.  Weather-wise, a full face lid is usually quieter and keeps you warmer when needed.  What would be ideal is a helmet that converts from one to the other.

Jo Sinnott wears just such a helmet in Wild Camping, but those Roof Helmets are impossible to find on this side of the world.

The Jacket

I picked up a Teknic Motorcycle jacket at the North American Motorcycle Show in January from Two Wheel Motorsport.  My first jacket was a discount deal, the first thing that looked like it would do the job.

This Teknic jacket is next level in every way.  It breaths well in warm weather and keeps me remarkably warm when it isn't.  It was able to handle the twenty degree swing in temperatures on this trip with ease.  It's a bit disco, but I like it, and with my initials on it, I couldn't say no.

Too bad Teknic seems to have gone under.

The Gloves

I brought a long a pair of colder weather gloves but never used them.  Between the Concours' wind protection and the multiple talents of the gloves I brought, I never used them.

These leather mits from Leatherup.ca have far exceded any expectations.  They breath well, are warm in the cold and feel both sturdy and protective.  Other than some tired velcro on the wrists that still work, these gloves have been flawless.  I need a red pair to go with the new colour scheme.

The Boots

Another second generation purchase, these Alpinestars MX-1 boots were a second season buy to replace the discount boots I purchased to attend riding school.  Like the gloves, they manage a wide range of temperatures, especially on the well equipped Concours.

Unlike the cheap boots, I sometimes forget to change out of these when I get to work, they're that comfortable.  They did the whole Georgian Bay trip flawlessly.  The only time I'd worry about them is in rain, which I didn't face - they are vented.

The Pants

I brought along a pair of motorbike-specific jeans, but never used them (I intend to pack much lighter next time around).  The Macna pants I got last year but got too fat to fit into fit much better now, and I never took them off.

They look a bit spacey, but I like that.  They breath like shorts and still manage to provide excellent wind protection and remarkable warmth behind the Concours' fairing.  Best pants ever?  Maybe!  The armoured jeans stayed in the panier all weekend wasting space.  These Macna pants are one of the few pieces of kit I can offer no improvements on, they are ace!

The Luggage

The Concours comes equipped with a pair of panniers from the factory which I used for tools and tech on one side and rain gear and clothes on the other.  I generally never had to go into either.

When I first got the bike I got a Givi Blade B47 tail box.  In general use it stays on the back and is used to hold helmets and bits and pieces when I commute to work.  Like my previous Givi it has performed flawlessly.

New for this trip I picked up an Oxford X30 magnetic tank bag for less than half price thanks to Royal Distributing's tent sale in the spring.  What a fine piece of luggage this bag is!  On the ferry to Manitoulin I consolidated the book and camera bags I brought along into it and put them away in the panniers never to appear again (I plan to pack much more lightly next time around).

The Oxford worked as a backpack, camera bag and laptop case.  Fully expanded it carried all of those things and more with room to spare.  It was also nice to lay on when bombing down the highway when I wanted to get a couple of minutes out of the wind.  I'd highly recommend it.

***

Good kit can make all the difference, and what I had for this trip did the job so well I didn't need any of the backup I'd brought along.  After you've done a few trips I imagine you refine the kit until you've narrowed it down to just what you need and nothing more.

I'm still looking for the helmet I fall in love with.  I must have an oddly shaped head, but I live in hope.  I'm going to have to commit to a top tier helmet, but not until I'm sure it fits, and it can do everything I need it to.