Motorcycle Destinations: Mostly Ironheads In Elora, ON.

There was a time when every motorcyclist was also an amateur mechanic.  Getting your hands dirty was the only way to keep early motorcycles running.  We're over a century into the evolution of the motorized bike now and, as in all places, digitization has taken over.  Modern mechanics are now called technicians and have to be as adept at communicating with the computers on a modern motorcycle as the old school types were at diagnosing a mechanical fault with their senses.  Both are complicated, but in quite different ways.  There are obvious advantages to modern bikes in terms of efficiency, ease of use and dependability, but motorcycling is inherently a compromise in convenience, and many of the iconoclasts who escape the clutches of automotive transport to ride in the wind question the replacement of human skill with automated assistance.

Back in the day the motorcyclist themselves performed many of the tasks that a modern day technician does, so what was left to the old school mechanic?  What you'd typically find in a pre-war motorcycle repair shop looked more akin to a machinist's bench than the antiseptic, electronically focused diagnostics bay of a modern day garage.  That ability to manufacturer your own parts and diagnose problems without computer support, using only your senses and your hands might seem simplistic and archaic, but it was nothing of the sort.  There is a secret art to working with pre-electronic, analogue motorcycles that trips up many modern technicians who, while adept in leveraging digital tools to diagnose digital machines and replace parts, struggle to diagnose and repair mechanical faults.

***

If you're into restoring older machinery, this vanishing skill set is hard to come by, but I'm fortunate to live near one of these rare, independent, locally owned shops.  Lloyd Gadd is the owner and operator of Mostly Ironheads in Elora, Ontario.  With decades of experience in mechanics, he approaches motorcycle repair old school.  His shop is part machinists, part mechanics and part historical ode to The Motor Company.  Lloyd focuses on older Harley Davidsons, but as the name of the shop implies, it's not an exclusive focus.  Lloyd is also a qualified mechanic who can do everything from MoT safeties to changing a tire.

I was in there most recently getting last winter's Fireblade project safetied, and in the process Lloyd's prompt service got me looking at a better way to do motorcycle tires that will save me a significant amount of money.  While I was over there I also did a round of photography to give you a sense of what goes on in this old school shop.

Multiple engine rebuilds of air cooled Harley twins were ongoing in this small but dense workspace.

Unlike like most modern shops that simply refuse to work on long term mechanical or machinist driven repairs in favour of high turnover/quick to repair parts replacement, Mostly Ironheads will actually machine parts and rebuild a motor from the ground up.

It's a whole other level of mechanical commitment when you are prepared to turn your own parts out.

Lloyd has a number of customer projects on the go, and also makes a point of collecting older and vintage parts.  If you're fan of Harley Davidson you should make a point of riding up to Elora and checking out what's on hand - in many cases you'll see parts that are so rare that you may never have seen them before, even if you're into classic hogs.

Lloyd told me the story of a 1950s Harley racing motor he'd come across.  Only one of the two heads is accurate, but he's on the lookout for a replacement - though seven decades old serviceable racing parts don't survive well, as you can imagine.  When he has this rare piece of motorcycling history back together it'll be one of the few remaining complete Panhead racing motors in existence.  You might think that's a one off, but not in this shop.  Even if you're not into HD, this place is an ode to moto-mechanical history and worth a stop.  Air cooled bikes have an aeronautical aesthetic to them that modern bikes often miss.

The machining needed to sort this head out is impressive.  It had worn down below spec so is now being built back up and reground to specifications.  When you can machine your own parts, you're as much an engineer as you are a mechanic.

 Being a restorer, Lloyd is always on the lookout for parts, and the shop is an ongoing work in progress, with parts coming in and getting sorted and stored until needed.  Previous customers, online and estate sales and various other connections like the Harley Owners Group mean Mostly Ironheads are able to draw in older parts, often found in boxes of 'stuff' that get dropped off.

Lloyd mentioned a customer who dropped off a box of stuff while clearing out space at home.  In the process of going through it they discovered an unopened complete carburetor assembly still in the original factory packaging from the mid-sixties!  There is a joy in bringing a piece of history like this back to life, and the joy is alive and well at Mostly Ironheads.  If you're in Southern Ontario, it's an easy ride up north of Guelph to the shop.

This is that racing motor - one of the heads is incorrect, but the rest is intact and very rare!

 These are the cam lobes for that racing head compared to a typical one.  Not only is the racing cam lobe lighter with hollowed shaft, but it's also heavier duty in terms of strength.  Here and here are good primers on cam profiles if you're curious.  Whereas the right side regular cam is designed for long term use and efficiency, the more radical racing came on the left is designed to stay open longer, rev high and produce more power, though it wouldn't idle well, get good mileage or run smoothly.  But when you're aiming for all out speed, you'll put up with that just so you can wind it up and go.  You're unlikely to see mechanical history like this anywhere else in Ontario.

In addition to the restoration work going on, you'll also find an eclectic mix of older, finished air cooled Harleys ranging from customized choppers to more standard rides.  If you're into older, air cooled machinery, this will really float your boat.

Lloyd's area of interest extends from post war bikes all the way up to the last of the air cooled, carburettor fed bikes.  If you're into graphic design, you'll see everything from post war art deco to sixties and seventies disco and eighties futurism in the logos and bike designs.

There are some core elements to Harleys (like v-twin engines), that evolve slowly, but design wise they're much more in tune with their times than you might have assumed.

1971 Triumph Bonneville Restoration: Front Fork Rebuild

It's all snow and wind outside so I spent a good six hours in the garage this weekend rebuilding the front forks and the triple tree on the '71 Bonneville winter project.

The forks on the bike had been 'choppered' with massive fork tubes and spacers in them.  The bike came with new stock fork tubes so after a cleanup both front forks got rebuilt with stock fork tubes.  I'll put the chopper ones up for sale and see if it'll make a dent in the new parts order I got in.

The internals on the forks were in good shape (it has always been stored inside).  After a cleanup they went back together again nicely.  The picture on the right gives you an idea of just how long those fork tubes were (almost as long as the whole shock!).

The right side front fork went right back in no problem, but  the left side one won't fit in the lower triple tree mount (it has a bolt that squeezes it on but the circular clamp is too tight.  I've tried heating it up and wedging a screwdriver in the gap to respread it enough to accept a fork.  I shouldn't complain, this is the only thing that's being difficult on this fifty year old machine so far.

The lower fork unit as it came out of the giant chopper tubes.

The same piece cleaned up.

Parts diagram from the '71 Triumph's parts manual.

Meanwhile, the first parts order came in from British Cycle Parts.  They were great helping me clarify what I needed to get started.  The order was about $450 including shipping and got here quickly (within a week), one box from their Canadian warehouse and the other from their U.S. one.  I haven't started installing anything yet, but I now have what I need to rebuild the Amal carbs, sort out the electrical system and take apart the motor to prep it to run for the first time.

Motor gasket set!

Electronic ignition system and coils!

Amal carburetor rebuild kits!

Rubber bits!  This time 'round I got a new kickstart rubber & the gear shift rubber.

That's a stock style new rubber to replace whatever the f*** was on it.

The monkey who was choppering the bike put massive footpegs on the rear peg position,
but that doesn't make any sense on a chopper (they're usually feet up and forward).
These are the stock footrests.

Stock foot rests (and hardware)!

The plan is to rebuild the carbs, get the motor sorted, install the upgraded ignition system (which I suspect will also involve creating a new electrical loom) and then see if I can get it all to run.  Once I've got it a step closer to running I'll be back in touch with BritCycle to get the other bits and pieces I need to get it rideable.  The plan is still to get it to a place of getting a safety and putting it on the road next season.

I'm not a big fan of lost causes and I wrench to ride, so the point is to get the Bonneville back into service. After watching a lot of Henry Cole on TV, I like the idea of a 'rat bike', which also means I can focus on the mechanics rather than how it looks.  If I can get the mechanics sorted to the point where I can ride it, I'll do a season with it rough but rideable and then consider my options.  I got the bike and spares for $1500 and I've just put another $450 into it.  I think I can get it roadworthy for under $4000 and a non-running barn find bike of similar era was going for a grand more than that a few weeks ago online, so no matter what the Bonnie project won't ever drip red.

In a perfect world I'll get it sorted and some one will offer me more than I've put into it (cost, not time, I'm happy to put time in keeping bikes on the road).  Whether that's once it's roadworthy or once it's been cleaned up too, I'm easy.  Meanwhile the Bonneville is doing what I wanted it to:  giving me an opportunity to go deep on a motorcycle restoration and learn a lot in the process.

The motor's getting cleaned up and recommissioned.

Once the (now stock) forks are back in I'll wheel it out for a deep clean on the motor
and then start with the electrics before rebuilding the carbs.  With any luck the old Bonnie
will be to the point of starting by the new year.

Somewhere in between all this deep surgery, the Concours needs new brake pads and the Tiger has some new sprockets and a chain to install.  To be honest, these minor maintenance jobs are something to look forward to after the deep diving into the restoration project.

Last winter was a deep maintenance round on the Tiger, but even that pales in comparison to the scale and scope of the Bonneville restoration.  Practical Sportsbikes and Classic Bike are both magazines focused on hands-on motorcycle mechanics and both have talked about the dreaded project stallout that can happen when it all gets too much.  I'm taking the advice of both mags and breaking this up into chunks and then solving things subsystem by subsystem.  The small wins help me feel like like the project is progressing and prevent the dreaded project-stallout from being overwhelmed by the whole thing.

On the upside, the fact that we got 15cm of snow over the weekend isn't really on my mind as I'm keeping track of many things-to-do in the garage.

One Tight, Not Too Tight

Now that the CBR900RR Fireblade project is sorted and on the road, I'm finding myself doing what the original intent was in getting it:  learning from a different type of motorcycle.  Unlike the heavy industry Kawasaki Concours, or the SUV of motorcycling Triumph Tiger, the 'Blade was built to a different design brief. The other bikes were over engineered heavy to last, but the the Honda is a feather.

That philosophy is at odds with the heavy handed git who owned it before me and managed to maintain it into such a state of disrepair that it kept it off the road for years.

From the rear brake cylinder that was assembled backwards and over tightened, to the over tight wheels and the slipping clutch I've just adjusted to actually be at spec rather than over-tightened, I'm finding the Honda was a victim of a heavy hand and unsympathetic mechanical inclination.

When I was a teen my dad was talking me through a head gasket repair on one of my first cars.  We weren't minted, so the only way I was driving was if I could keep an old car on the road; mechanical training was an implicit part of vehicle ownership for me growing up.  As we were tightening the head back on he made a point of talking me through the bolt pattern - always tightening opposite bolts so it would seat evenly, and then said something that I've never forgotten as we started tightening down the head:  "always one tight, not too tight."  I guess the guy who abused this lovely piece of Honda engineering into years in a garage never got such good advice.

Mechanical sympathy is an important part of maintaining any machine, but especially a motorcycle, where if you are cack-handed you can end up seriously hurting yourself when it breaks.  In that way, motorcycle mechanics are a lot like aircraft mechanics, it's a do it right or it can go very wrong kind of situation.

Part of that sympathy is taking the time to understand what the engineers who designed the machine want you to do in terms of looking after it.  In the case of the CBR900RR, Honda would like you to leave 10-20mm of play at the end of the clutch lever - this one was set so you could strum it like a guitar string.  This play is to ensure that the clutch fully disengages when you let go of it.  An over tightened clutch cable means it's always set to be slightly pulling and engaging the clutch.  Making it too tight isn't just a failure of the hands, it's a failure in thinking that wounds the machine.  In this case, the over-tightened clutch cable explains why the 'Blade was slipping RPMs when I opened it up.  A sympathetically tuned motorbike will give you a purity of interaction that allows you to more fully understand the machine.  This is one of the reasons why I value technical fluency so much, it puts your ability to operate technology into focus in a way that the technically ignorant will never realize.

***

Meanwhile, in the land of Tim where he's trying to keep a 17 year old European and a 23 year old Japanese bike rolling during the perilously short Canadian riding season, the Tiger's stalling when hot continues.  I've ordered a replacement air idle control valve from Inglis Cycles, who have once again exceeded expectations during a pandemic by sourcing the part from Triumph in the UK and getting it to me in about a week.

One of the nice things about the Tiger is that it's fuel injected, so all that carburetor management is taken care of, but the evil end of computerized fuel injection is that after seventy six thousand kilometres it's finally gone wrong, and an electronic system like that can go wrong in a lot of different ways. 

I'd never gotten into the Tuneboy Software that came with the Tiger (the original owner installed it along with a Power Commander), because if it ain't broke, don't fix it.  But now that it's broke, I got going on it the other evening.  Getting into the bike via a computer was pretty cool.  The software is Y2K retro-hip and the connection was straightforward.  The 20+ pages of instructions weren't really needed (I'm handy with computers).  Windows 10 automatically recognizes what you're plugging in (back in the day, WinXP would have needed drivers installed), and the software is responsive and quick to connect.  It occasionally drops connection, but unplugging it and plugging it in again resolved that each time.


The compact disk (told ya, Y2K hip!) had all of the stock maps for my year of Triumph Tiger 955i engine on it, so I saved what was on there in case it was some kind of cool specialty map the previous owner had worked out (dude worked at a nuclear power plant, so don't underestimate his tech skillz), and then I flashed it with the stock numbers, which took about 20 seconds and returned a confirmed result.  There is a slight lag, but otherwise this is easy to use stuff.

I then played with the diagnostics tool for a bit, hoping for some data that will help me isolate the hot idle stalling fault.  The software says there are no errors (promising that this is that mechanical failure then), and the only thing that looks out of place is a strange return on the engine temperature.  It seems to read accurately and then show -40, even when the fan is coming on, but if the fan is coming on and the temperature gauge on the dash is reading normally, I suspect this is something to do with how the software syncs with the on board computer rather than an actual fault, but I'm going to keep it in mind.

The problem with an idle fault on a fuel injected bike is that the engine management system is taking in data from a number of sensors and using it to balance engine activity, like idling, based on that information.  I've got the mechanical component that regulates idle on the bike incoming, and I hope that resolves the issue, but what I fear is that it's something else, and with these complex electronics systems could mean that anything from a dozen different sensors or relays to a loose or broken wire.  With any luck, it's that idle air control valve and I'm back on the Tiger... and the Honda, just not at the same time.

Pulling the Carbs

The Concours' carburetor has become cursed by demons.  These carbs tend to not come back from sitting very well, though last year they didn't have this problem.  When I put them away they were running well, but no longer.

Yesterday I pulled the tank again and went over the vacuum tubes in detail - no breaks, no problems.  After putting it all back together again I took it out and had the same hesitation on throttle and back firing.  The bike feels seriously down on power too.

I was hoping to send the carbs down to Shoodaben Engineering in Florida for a spa session with Steve.  His prices are more than fair, but after having an economist (whatever the hell that is) as a Prime Minister for eight years, Canada's dollar is in the toilet and my $500US carb repair would cost north of $800 with shipping, customs and the exchange rate.  I paid $800Cdn for the bike in the first place.

So I'm rebuilding carbs!

In spite the many terrifying stories of carb removal on a Concours, I found the process pretty straight forward (thanks to Steve's video).  Warm up the rubber on the airbox to carb, they get nice and soft, and you wiggle the whole thing free.  With the carb on the bench, parts are ordered ($200Cdn for 4 kits - 1 for each carb) and I'm beginning to break it down to rebuild each.

Rainy Day Carburators

A cold, rainy Saturday had me break down the carburetor on the Yamaha XS1100.  A Triumph Spitfire and Mercury LN7 owned as a teen made me pretty handy with carburetors.  In addition to multiple rebuilds I also got handy at jury rigging manual chokes thanks to the utterly crap Ford Escort carb set up.

The beautiful Mikuni unit on the Yamaha looks like a piece of industrial art in comparison to the pedestrian Triumph and Ford carbs, unfortunately it's seized.  After breaking down the top end I soaked it and freed up the seized throttle body.

The next to-do with the Yamaha is to clean up the gas tank and then reassemble the fuel system.  The engine isn't seized and spins easily, so I think I'll have an easy time firing it up for the first time in years (knock on wood).

Here are some pics of Mikuni's Yamaha masterpiece:

The throttle cable wasn't playing nice even after taking apart the handle bar - so into the carb I go...

The Yamaha XS1100 engine block with the carbs off - it got the Warhol treatment....

Like everything else so far, the internals look to be in good shape on the old (35 year old!) Yamaha

Cleaning up the fasteners using the caps from each carb to keep things organized.

XS1100 is in for surgery

Not many riding days left as the weather turns up here in Canada