Riding The Tiger

When you want to start riding in April in Canada
you need to take precautions!

Today saw a 150km round trip down to Ancaster and back; the first ride of the season.  It was 2°C when I left at 7:15am this morning.  No frost, but a cold ride to start.

I stopped in Kirkwall, by the kirk, for a stretch and to remove the balaclava.  By the time I got down to Ancaster for an educational conference it was warming up nicely.

I was out of the conference about 2pm.  By that time the temperature was pretty much perfect for a ride.  I took the main road into Ancaster and then up Sulfur Springs and Mineral Springs Roads, doing a loop before heading back north.

A cold start.

The Tiger was fantastic, feeling more powerful than the Concours with a much more relaxed riding position.  At first the higher riding position felt a bit awkward, but I quickly discovered that the Metzeler tires and taut suspension, even though it's long, could handle any corners I threw at them.  Any cornering awkwardness had at least as much to do with me being rusty from a winter in boxes as it did with the bike's geometry.

There were dozens of other bikes out and about in the warm weather.  The Tiger got a lot of double takes.  I know it shouldn't matter but in a couple of days of riding I've already had more compliments than I did in a year of riding on the Concours.  Halfway home I was thinking I could leave for Ushuaia immediately on this fine machine.

Once home I checked over the fluids.  The Tiger barely used any gas, and the oil and coolant was right where I'd left them.  I've got an air filter on hand (the previous owner said, "air filter?" when I asked if it had been done recently), but I don't want to miss a ride while I'm doing it now that the weather's good.  I'm hoping a mid-week after work change will give me the time to get it done.  To do the air filter means pulling the gas tank - it's not as easy as it's been on previous bikes.

A short stop in Kirkwall got the balaclava off (t made the helmet uncomfortably tight)

The twisty road sign is in short supply in Southwestern Ontario -
Sulphur Springs Road & Mineral Springs Road are exceptions.

Riding a Tiger really is a magical experience!

We've already got a route planned out for a sunny, warm Sunday  in April:

Triumph Tiger History

First gen Tiger from the late '30s

I've been finding out the history of Triumph Tigers from various places on the interwebs. The first Tigers were born just before World War 2 and were quickly put on hold when the war started. With rigid rear frames and girder front suspensions, these were 1930s bikes in every sense.

Tigers followed the steady evolution in motorbike technology throughout the Twentieth Century, and also followed some rather silly styling trends, like shrouding the mechanicals in 1950s aero inspired nonsense.

'69 Tiger made in the UK the same
year I was!  Nice high pipes!

Pam Anderson riding
a Tiger!

Things get interesting again in the 1960s, with late '60s Tigers, along with the British motorcycle industry in general reaching a zenith before being crushed by their own weight and a lithe, hungry wave of Japanese imports.

Through the long, dark tea time of the soul in the '70s and '80s (and while my parents and thousands of others fled the country) Triumph went down in flames along with much of British manufacturing.  In '83 John Bloor, a building contractor who was looking into the purchase of the derelict Triumph factory to build more homes ended up buying the brand.  After sitting on it for a while he rebooted it and built a new factory.  

It's one of the best examples of British manufacturing rising out of the ashes of old money and old ideas and embracing a more effective approach to manufacturing.  Without the conservative  establishments of aristocratic ownership and unionized labour Bloor was able to reignite British engineering and give it chance to shine again.  You might think that it isn't properly British if it isn't mired in limited social mobility and the kind of Kafka-esque bureaucracy that makes building something well next to impossible, but that was only a moment in Twentieth Century British history and doesn't speak to the engineering prowess of our little island.

After Triumph rebooted in the early '90s, the Tiger reappeared in '93 during the second wave of model introductions.  An early example of what came to be known as adventure bikes, the Tiger was a tall, long suspension, multi-purpose machine running a three cylinder engine.  

Having tapped into this trend while it was still only popular in continental Europe, Triumph's Tiger line has been a key part of their brand for the past twenty plus years.  If asked what bike I'd want to take around the world tomorrow, the Tiger Explorer is at the top of the list.

Tigers have been around, in one form or another, since before World War Two.  I'm looking forward to getting to know the one I found this month.


TigerLinks:
http://www.motorcyclenews.com/news/2013/march/mar1113-triumph-tifer-timeline/
http://www.classic-british-motorcycles.com/1969-triumph-tr6.html
https://en.wikipedia.org/wiki/Triumph_TR6_Trophy
http://www.triumphworld.co.uk/pages/triumph-enthusiasts/all-things-triumph/tiger-history.htm
http://www.rat-pack.com/TriumphHistory.php
http://www.gregwilliams.ca/?p=1693
http://www.ianchadwick.com/motorcycles/triumph/time03.html

Tiger Tales in a Never Ending Winter

It's been an icy, crappy spring, but it looks like the end is nigh!

Tiger tales on a wintery April Weekend.  Last year at this time  Max and I were out doing a 300km+ run to Blue Mountain in some fresh Ontario spring air.  It was cold, and even flurried in places, but it was doable on dry roads with winter well behind us.

After another round of freezing rain last night we were up to ten degrees today.  Over the next few days it looks like riding season will start officially.  The Tiger is at my local mechanic getting saftied.  I should be on the road and ready to go by 
Wednesday, the day everything starts to get better.  In the meantime, while waiting for the ice age to end, I've been playing with some digital imaging:

Tigertester by timking17 on Sketchfab - a 3d model of the Tiger

Soon enough I'll be able to stop looking at it and starting to ride it!

Variations on a garage photo:

3d printed Triumph logo

I backed the Tiger out while trying to get the carbs sorted on the Concours - 2 hours later is was a white out out here.

3d printed Triumph logo

Triumph logo 3d printed

Dremel 3d printer doing the business

I scanned the Tiger with a Structure Sensor and then printed the 3d model on the Dremel 3d printer - not just a model
of a bike, but an exact scale model of my bike!

Parts on Order Makes me Stop & Consider

Over the Easter long weekend I've rebuilt four carbs and put them back together again.  Unfortunately they won't go back on nicely thanks to two decade old rubber boots, so they're on order.  It's nice to have a forced day off.

If you're ever rebuilding carbs on a ZG1000, and the airbox on it is more than ten years old, it's a good idea to get some airbox ducts (that connect the airbox to the carbs).  Supple, soft rubber is important when connecting these up.  I tried for a frustrating couple of hours to get them to join properly.  This is especially difficult when the inner boots are rock hard, even when warmed up.  Steve suggests new carb boots to cut down on swearing, he ain't kidding:

Sixty bucks and should be here by
Wednesday.

I contacted my local dealer and they can have boots here by Wednesday.  They're charging less than they are going for on ebay or online retailers.  Score one for my local.  Sixty bucks means less swearing and an easy install.  Wayne, the Yoda-like parts guy at Two Wheel, says you're lucky to get two decades out of a set as they harden over time and eventually split.

With the weather going sideways again, there won't be much of a chance to ride any time soon.  Hopefully this means I can get this odyssey finished and the bike back on the road by the time the weather clears again.

The airbox ducts/boots that need replacing - the old ones are not only beaten up, but they've gone hard.
Even putting heat on them doesn't soften them up.  Note the flat spots up by the airbox that show you which
way to turn the boots.

Heating up the airbox boots - but they're too old!

A big empty where the airbox and carbs usually go

This ordeal has me rethinking things.  My wife suggested I unload everything except the old XS1100 and buy a regular motorbike that is more dependable.  When I started riding I got a dependable bike that just needed some cosmetic work.  It was so dependable it was tedious.  Since then I've gone back in time and enjoyed the world of carburetion and two decade old rubber, perhaps a bit more than I wanted to.

I genuinely enjoy mechanics, but never when there is a time demand on it.  I've already missed three riding opportunities because of the stuttering Concours, and this irks me.  The idea of wiping the slate clean and moving forward appeals.  I started riding late and moving through a number of bikes seems like a way to catch up on my lack of experience.  Maybe it is time to put sentiment down and move on.  I didn't start riding to watch the few lovely days we have in a too-short riding season pass me by.

A Tiger?  In my garage?

The little Yamaha and the KLX are gone now, netting me about $3000.  As it happens, a 2003 Triumph Tiger is available just over an hour away for about that much.  Come the end of the week I might be able to say, "a tiger?  In my garage?  Must have escaped from a zoo!"

Local Bike Shops

Around the horn on local bike shops

I recently took a little road trip to local bike shops, two of which I hadn't been to yet.  So far I've been a diligent Royal Distributing
customer,  they are closest and offer a big selection.  It's pretty much serve yourself, and the kids working there don't seem to know too much about riding as opposed to selling stuff.  They also tend toward cheaper, mainstream gear.

To expand my options I thought I'd drop by A Vicious Cycle in New Dundee (great name) and Tri-City Cycle in Waterloo.

A Vicious Cycle had knowledgeable guys on the counter who were less focused on a quick sale than giving me good advice.  They knew what they were talking about and took the time to figure out what I needed (as opposed to what I'd seen online).  I think I might have found my new favorite bike shop.

Tri-City Cycle is a motorbike dealer, so the main building is all about selling bikes.  There is a small room in a building in the back that sells gear, but I found the selection quite limited and the vibe was quick sell, though the guy there did know of what he spoke.  Like Royal Distributing, Tri-City has a more mass market vibe; it was stuffed with product moving through.

My new favorite

A Vicious Cycle (which I never get tired of saying) was clean, well stocked but organized and, as mentioned, the sales support was excellent.  I'm going to go for the Macna summer pants they have on offer.  They seem to be of excellent quality and are by a European manufacturer that aren't the same same old brands pushed everywhere else.  Most importantly, the knowledgeable and patient sales guy took the time to show me a pair and how they work.

I'd never suggest going to a single retailer for all your gear.  At various times different retailers will have what you're looking for on sale or on hand, but when you find a place that you like, it's nice to know you have a first go-to that won't let you down.

Follow Up

I got the Macna summer pants and they are excellent.  I ordered online, A Vicious Cycle sent me updates so I knew where things were in the delivery cycle, and I received my pants a day before they said I would.  The pants themselves are very high quality and unique looking compared to the matt black look popular in North American gear.  Unlike the Joe Rocket pants I tried which are far too long in the leg, the Macna's fit me perfectly, off the rack.  Between the the quality of the online service and quality of the product, I'm very happy with A Vicious Cycle.

The Triumph Tiger 800: the bike I'll get hard luggage for

Thanks to their honest advice about how much I'd need to put into getting a hard luggage rack that works well with the Ninja, I've decided to go with a tail bag and save the carrying gear for a future bike more suited to the task.

In the meantime, I can't say enough about the quality of those Macna pants.  They breath like crazy, even on hot sunny days, and because they aren't black they reflect their share of heat as well.  If you're looking for a summer pant, these are excellent!