2020 Moto Wishlist

Next season is a long, cold winter away, but I'm already daydreaming about what might be...



TomTom Rider 550 Moto-GPS:  I've always made do with my phone, but Google Maps is kinda crap when it comes to navigating on a bike.  Whenever you reach a way point it wants input, which isn't easy when you're flying through the air at 60mph with gloves on.  The TomTom not only is glove friendly, but the software is moto-specific, so no pointless inputs.  It even has a twisty-roads function!  $370CAN

A New Roof: I'm partial to Roof Helmets. To date I've owned a first generation Desmo and a Boxxer. The Boxxer is a simple thing and I miss the plush, quieter and more substantial Desmo I had before. Roof has actually come out with a new Desmo, the RO32, and I'm partial to the new flat dark blue lid they've just done. Roofs are hard to find in North America, but Chromeburner has the new lid on for about $500CAN.                          

Racing Kit!  A one piece racing suit for the other thing below.  Now that I'm with sports bike, perhaps I could take it out to track days.  To do that I'd need the proper racing kit.  To get the right spec helmet, boots, gloves and racing suit, I'm at about $2200.  Fortnine has the bits I'd need.

A long time ago I did a car performance driving school at Shannonville Race Track and really enjoyed it.  Taking the Fireblade out on track would be a brilliant way to get to know this athletic machine.  Riderschoice.ca has track days.  I just need to get the bike sorted and have the kit necessary to do the business.

Starting at about $170.

Of course, if you're doing track days and need to prep a bike for the track, you need to drain coolant and all sorts of other stuff.  What you really need is a way to get it there.  The new Transit Connect is super fuel efficient for a van and would carry my stuff and people when needed.  About $37k.

Van's got a tow hitch, so trailer, obviously...  $1600 at Canadian tire for this one.  Maybe trailers don't matter, but I'd like to colour match this one to the van.  With that and a fitted cover, it could take one or two bikes to wherever the snow ends in the winter and trackdays in the summer.




BIKE WISHLIST:

A next level off-roader.  I've done a few rounds of off-road training and dig the experience.  I'd like to race enduro and need something dependable and big enough to carry me.  There was a Suzuki DR650 I looked at in the summer for a very reasonable $4000.  It was five years old but basically brand new due to some back luck by its owner.  I wish I could go back in time, get that bike, sort it out for enduro racing and then do it!

Track-day bike:  I've already got this one underway with the Fireblade project.  Sorting out the CBR900rr in the garage and then making it track-day ready would be brilliant.  The real block to entry is the cost of racing kit and the ability to transport the bike to the track.  I think I'm some finishing up and detail work away from putting the Honda back on the road in the spring.




Top Speed Machine:  I've always been partial to the Suzuki Hayabusa, and it would let me do a bucket list thing (200mph on a motorcycle) with only a few modifications.  To stretch the bucket list wish, I'd take it out to speed week in Bonneville and do 200mph on the salt.  If I wanted a leg up on this, someone has a modified turbo Hayabusa in Windsor.

A 2-up Touring specialist:  The Tiger will do 2-up work, but it isn't ideal for it.  A bike that's a 2-up specialist would be the ideal tool for the job.  Out of all the big cruiser/touring bikes out there, I think the Goldwing is the best.  I've ridden a friend's.  It's surprisingly athletic, even with 2 people on it.  Touring bikes don't come cheap - the 'Wing is a $30k thing.

Anime Dream Machine:  The Kawasaki Z1000 has long been a favourite and its Sugomi designed look is pure anime awesomeness.  I've got to admit that the Fireblade project sitting in my garage scratches many of the same itches though.  There's an orange Z1000 in Quebec going for about $10k.  I think the Fireblade might have scratched this itch...

Last Light of the Sun

Tuesday, November 26:  I got outside after work and noted that the weather didn't hurt.  Could this be a chance for a final ride before the icy grip of old man winter chokes the life out of my riding season?

On our way home I saw a determined rider on a Harley with scarves tied around his face and that tipped it.  It took me about 10 minutes to thermal up (this opportunity was still only a 5°C one) and wheel the Tiger out from under its blanket.

The 16 year old Triumph started at the touch of the button, though the battery didn't sound happy after sitting in freezing temperatures for a month.  As the bike warmed up I made sure no skin was showing and off I went.

I just did a 30km run down to the Westmontrose Covered Bridge and then back to Elora, but the chance to fly again before the winter closes in was priceless.  There is nothing better than an unexpected ride when you think you're months away from being out in the wind again.

A brief stop at the church in Westmontrose for some thematically relevent early November sunset shots in the graveyard before riding back upstream.  I pulled into the gas station in Elora and was surprised to see four other bikers filling up before the long cold resumes.

The Tiger is now parked up with a full tank of gas, ready to slumber once again under its blanket until the distant spring approaches...

'98 Fireblade Winter Project: Wiring & Petcocks

With the carbs sorted I'm chasing down anything else that could have caused the fuel leak into the engine on the Fireblade.  Yesterday I had the petcock out of the gas tank again and tested it over a catch basin.  Fuel flows fine when it's on, but it continues to drip when it's supposed to be closed, so a new petcock is in order.  Fortunately they seem to be a regularly replaced maintenance item because you can buy them on Amazon for not much money.

The neutral light wasn't working, so I got some LED replacements - they're super bright.  The wiring to the neutral sensor was stripped down by the drive sprocket, so I cleaned it up, reattached it and taped it up.  Voila, working neutral light again.

There were also a set of wires coming out of the drive sprocket housing that look like they go to a speed sensor which were resting on the exhaust pipe and had melted.  These too got sorted and re-wrapped.  I'm also going to fasten that loom so that it can't touch the exhaust again.

There are still lots of little details to sort, but the Honda is coming together nicely.  I'll aim to have it safetied in the spring and then run it for a few months and see if having a second bike in the garage is worth hanging on to, or it might just be sold on to fund the next project.  In the meantime, I'm looking forward to running my first true sport bike.

CBR900rr Aerospace Motorcycling

With the carbs sorted and the oil changed, the Fireblade sounds like the machine it is (ie: fantastic!).  On the to-do list now is chasing down some wiring issues and shaking down the rest of the bike because a monkey was working on it before and I don't trust his choices.

In working in and around the Fireblade, it's the little differences that add up to a bike 50+ kilos lighter than the Tiger and over 100 (!) kilos lighter than the Concours (while making 33% more horsepower than either).  At 195kg, the Fireblade is even 10 kilos lighter than my first bike, a svelte 2007 Ninja 650r.




The 'Blade makes lightness pretty much everywhere.  I'm particularly fond of the speedholes all over it.

When it isn't holey, it's reduced material wherever possible.  Even the rim spokes are thinned out:

Where Honda had to use material, it's the lightest they could manage...

Compared to the Kawasaki Heavy Industries bikes I've owned, this CBR900rr is a built for purpose thing that feels more like working on an aeroplane than it does a motorbike.

... and it sure is pretty.

Fireblade Fountains

I finally got the carbs sorted on the Fireblade project (sense of achievement!) and when I fired it up they felt very responsive... but then a giant geyser of oily water spewed out of the valve cover exhaust pipe and hit the ceiling (!).  Never seen that before.

Rather than repeat the fountain, I put a pipe on it, ran it into a container and videoed the weirdness...

(it's a 360 video, you can move the mouse to look around - like at the oily water dripping off the ceiling)

So the fountain happened both times I ran it, and the stuff that came out looked like watery oil rather than oil with some water in it.  Next step:  drain the oil...

... which looks like water.  That's not good, and it's something I've never seen before.  Why on earth would anyone ever put water or coolant in an engine like that?

I've done head gaskets on cars before and I'm pretty familiar with the consequences of oil mixing with coolant.  It usually goes both ways (oil gets in the coolant, coolant gets in the oil, but the coolant looks brand new and the level is good.  When running there is no bubbling in the coolant overflow (usually a running engine will force gas and oil back into the coolant reservoir if there is a blown head gasket).  As amazing as this sounds, I think the idiot who owned this before me filled the engine with coolant instead of oil, but I really can't understand why.  It's either gross incompetence or he sold me a bike with a known blown engine, which is a pretty shitty thing to do.  Incompetent or nasty, not a great set of choices there.

Next up is actually putting oil in the engine and running it again.  I've got some used stuff out of the Tiger which is the right weight.  If it works, then the guy who owned this thing before me might be the dumbest human in history.  Once I've run the old synthetic out of the Tiger and confirmed everything works, I'll drain it and put some new stuff in.

My first sports bike has been a bit more baffling than the XS1100 (air cooled, nothing weird there other than the ownership) and the Concours sports tourer which had been through hell, but was owned by a guy who knew what he was doing.

The muppet who owned this bike before me will have me going top to bottom on it before I get it out on the road - I can't trust anything that was done to it.

Follow up:  the engine was full of gasoline because the petcock that portions fuel out of the gas tank had failed, causing the gasoline to run into the carbs, fill up the bowls and then dribble down the intake manifold into the cylinders, where it ran down into the engine.  This is evidently not uncommon on motorcycles because of the way they carry their fuel above the engine.  A new petcock, a carb rebuild and a couple of engine flushes and the 'Blade rides again.  Point to remember: check for leaking petcocks on older bikes!