Sunday 2 June 2019

Lobo Loco Water Is Life Summer Rally

We just spent a delightful dam day riding north and west from where we live looking for water themed locations for this year's Lobo Loco all-season Water is Life rally.

If you find that your riding is a bit aimless, or you're always showing up at the same places over and over, a long distance rally is a great way to break those habitual rides.  You get a theme and some specific targets, but you also get some special monthly targets in this rally.  It runs from May to October, so you have lots of time to get points.  You can set up rides with intention and ride as hard as you like.  Some people go and go if they're all about the points (and have a lot of free time).  I'm more about the exploration and photography opportunities, even more so If I've got a pillion along, but you can do it however you like.  My son and I have done this a few times now, and my buddy Jeff and I have had some epic rides, but this time it was all about my wife and I getting points and spending some quality time together.

For May the water specific theme was dams, so we went looking for the damned things in our area.  It's amazing what you can find when you ride with a purpose.  Only fifteen minutes from home we were stumbling across secret Mennonite fishing holes at the Woolwich Dam, and twenty minutes later chatting with dreadlocked sports bike riders on the Conestogo Dam causeway.  We bumped into a number of riders on the trip and always suggest they look up the rally as a way of extending their riding destinations.

Further north we stopped just past Harriston (after getting a photo of their water tower), and got lunch at The Red Caboose.  If you've never had an Ontario chip truck lunch, this would be a great place to start.  Everything is grown in the fields around you (including the beef).  It's what you'd expect to pay for a burger and fries, but this'll be the first time you've ever had something this fresh.  Some fancy burger joint in Toronto will but sriracha on it and charge you five times as much for something that tastes half as good.  The fries actually taste like potatoes.  We would never have stopped there had we not launched ourselves on this exploratory rally adventure.

With our stomachs full of goodness, we continued north.  After a water tower hit-and-run in Clifford we eventually found ourselves in the place where government cuts made the water kill people: Walkerton, Ontario.  We got to the Walkerton Heritage Water Garden only to discover it wasn't running - a local walking by told us they weren't turning it on due to new cut backs.  Thousands got ill and e Coli in the water killed seven, and now a similar government has cancelled the memorial to what their predecessors did - I imagine they're thinking this is best not remembered.  The irony runs thick, unlike the water in the monument.  The local said the politicians all spent more time making sure they weren't liable than they did actually trying to solve the problem.  Walkerton is now a vibrant community that has bounced back from this tragedy, but the damage runs deep, and more cuts are coming.

We left the park in a sombre mood and headed through the lovely town before striking out east on Highway 4.  Another water tower hit and run in Hanover and we were on our way to Durham and the ride south to home.

I'm sure I've passed through Durham before, but have no memory of it.  It's a pretty little town in rolling Niagara Escarpment country.  Alanna eagle-eyed the Garafraxa Cafe on the main street and we pulled in for a caffeine boost to get us home strong.  Things looked promising with an Italian coffee machine that looked like a Vespa scooter and a proprietor who knew what he was doing with it.  It ended up being one of the best Americanos I've ever had.

We pushed south to Holstein Dam while picking up water towers in MoFo and Arthur.  Our last stop was the Shand Dam that created Belwood Lake just down the road from our home in Elora.  To maximize points you want to get your bike in the photo and have signage and the dam itself in one of the two photos.  I find the Ricoh Theta 360 camera handy for doing this because it grabs everything at once, but many others just use their smart phone camera and get a lot more points than I do.  Naming conventions on your photos are important too - you lose points handing things in the wrong way.  Having Alanna along really helps with this as she actually reads the instructions.

By this point we'd been on the road for well over six hours and were ready to go put our feet up, fortunately our circuitous route took us in a big loop back home:

All told we think we cracked a thousand points on this ride, and discovered all sorts of strange little spots we'd have otherwise missed.  The Water is life Grand Tour full summer rally is running from May to October, so you've still got tons of time to sign up and give it a go.  If it grabs you, Lobo Loco is also running more intensive weekend and one day rallies throughout the season.

***

Lobo Loco Rallies on Facebook:  https://www.facebook.com/LoboLocoRallies/
Like the page and see what's going on - there is a vibrant community of riders involved with this.
 
Lobo Loco Homepage:   https://wolfe35.wixsite.com/lobolocorallies
Includes the intensive weekend events as well as this season's grand tour.  You can sign up on there through RideMaster - the same group that handles Iron Butt Rallies (if you want to get really serious).


NOTES:

Some dammed stops on this year's Grand Tour Rally:

Stop One:  Woolwich Dam & Reservoir 
https://theta360.com/s/o3txOAqc332jOD4u4RDytX4Hg
43°37'21.3"N 80°33'51.9"W
Getting signage with the name on it counts for points!

We went a bit overboard with this one.  It was our first stop, it was a lovely dam surrounded by Mennonites fishing and we wanted to make sure we got the required things in the photos (and they are many!)...

You will need to have the following in order to collect points:
A) A photo of the dam itself
B) A photo of signage indicating the name of the dam, or a photo indicating the name of the town the dam is in

- We will accept a “Welcome To”, City Limits, or Town Hall sign.
C) The GPS coordinates, approximate street address, or nearest cross street to the dam
Your motorcycle MUST be in at least one of the 2 photos.

You will receive the highest points ONLY for whichever you achieve for each individual dam:
99 points - motorcycle with the dam (which I think we got with the bottom one with me standing with the bike in front of the gate)
66 points - motorcycle with the dam signage

33 points - motorcycle with the town signage

... but I think I like the one with us leaning over the dam more.  Sometimes the photographer gets in the way of the rally requirements.
#loboloco Water is Life Rally 2019 Summer Woolwich Dam #theta360 - Spherical Image - RICOH THETA


We found a squirter at the Woolwich dam!

Stop 3:  Conestogo Dam
43°40'32.4"N 80°42'56.0"W
#loboloco Water is Life Rally 2019 Conestogo Dam #motorcycle #rally #theta360 - Spherical Image - RICOH THETA



Gotta get that signage in for maximum points.
Stop 8:  Holstein Dam
44°03'36.0"N 80°45'29.4"W
 ... that was a buggy one.  Dam in photo, check, rally flag, check, bike in photo, check!

Sunday 19 May 2019

A Nice Way to Turn 50...

Thanks to the Ontario Government ignoring the Canadian Charter of Rights and Freedoms and illegally forcing a contract on us, I had my 50th birthday off.  I had an entire year of saved up sick days stripped away, but hey, I got a day off for it.  So much for Charter rights.

I figured the Forks of the Credit would be silly over the long weekend, so I thought I'd head over there on the Friday afternoon.  Still lots of people about, but I got to have a couple of clean runs up and down the twisty bits where I wasn't on the bumper of a duffer in a cage.  I'm not leaving rubber doing this, and I'm usually within 10km/hr of the limit, but cars through this twisty, technical road are a bit of a disaster.  It was nice to get a couple of runs without worrying about the processing capacity of the driver in front of me.

Photos are taken with a Ricoh Theta V on a custom built mount attached to the wing mirror.  Screen captured in the Ricoh software and modified in Adobe Lightroom:


The switchbacks at The Forks...









The little guy on the side of the road said, 'woah!!!" so loud I could here him on the bike.  :)




Always look where you want to go - sometimes that's over your shoulder!






In the moment on one of the frew curves between me at the Niagara Escarpment.  If I lived in California I would be a regular canyon carver on the weekends.








Beautiful weather, minimal traffic and a frisky Tiger.  It was a good 50th birthday ride.

Sunday 5 May 2019

The Corbin Experience

The big five-oh is coming up so I got myself a present.  I've always wanted a custom saddle and after seeing buddy Jeff's new Sargent seat, I started looking into what's available for the Tiger.  Sargent doesn't do anything for Tigers as old as mine, but Corbin does.  Their site lets you customize your seat with material and stitching.  The Tiger isn't a shy and retiring sort of motorbike, so I wasn't very conservative in my seat design.


Corbin lets you play with variations on their online customizing tool.  I started off with basic black but quickly moved on from there.  You can go full disco oligarch if you want, but I looked at the Tiger and worked out a design that pulls the colours already on the bike together on the seat.  I took the most shocking part of the Tiger, the Lucifer Orange paint, and did the stitching in orange.  Most of the mechanical bits are black, so I stayed with a black set but went with a gripper material rather than leather.  The side panels I matched in navy blue with the blue on the swing arm.  The goal was to design a seat that looks like it belongs on the bike, and I think it does that while not being dull.


It's a pretty thing.
The customization options offered by Corbin are exceptional.  Less so was communication.  I sent in the request online and got an email asking me to confirm the order.  When I questioned the $120US delivery fee added on, I got no reply.  The initial email also promised a follow up when the seat was going into production, but that didn't happen either.  What did happen was one day I got a bill for $94CAD on my front door when I got home from work.  After driving over to the post office I got told there was a bill for taxes on the shipment, so that puts getting my Corbin to me at two hundred and fifty-five bucks (I could fly back from San Francisco where Corbin's factory is for about the same price)... and I had to go pick it up.


The seat itself is very nice on top.  The underside looks a bit rough with loose bits and rough holes , but I guess no one will ever see it but me.  It's heavy duty leather so it'll take a while to break in and will look better and better as it does.

Comfort wise, it feels very different from the curved stock saddle.  The Corbin is much wider, making the ground further away.  I can flat foot the Tiger on the stock saddle even when it's in its highest position.  The Corbin doesn't adjust for height, but its width makes it feel much taller.  The width was such a concern that I tried standing on the pegs to see if the seat interfered with my legs.  I can feel the seat (not so with the curved and narrower stock seat), but it's not pushing my knees away, so I can still stand on the pegs if necessary.


The seat's back is so steep that it feels like a small backrest, which does wonders for support and comfort.  My son is too big now to pillion with me (we exceed the bike's carrying capacity), but if my wife ever comes for a ride, I think she'll have a better view from a higher back seat.

The seat feels firm, but Corbin mention that as it breaks in it will conform to your butt specifically and soften.  The width of it handles weight so well that I really don't notice the hardness, and it's supposed to fade away over time anyway.  They suggest a 2000 mile break in period, which seems like a long one, but it is what it is.


It isn't cheap, but the lifetime warranty takes care of any quality worries, and it seems a well put together thing, once I got it to attach to the bike.
Installation wasn't as easy as I'd have hoped.  The Corbin is a single seat unit replacing a separate rider and passenger stock seat set.  The stock rider seat has a couple of hoops on the frame that locate the front and a pin locking mechanism in the rear.  The passenger seat has hooks on the front another pin locking mechanism at the back.  The all-in-one Corbin seat doesn't use the middle pin at all and wouldn't locate and lock in the rear pin.  Putting it on and off the big over and over trying to figure out why it wouldn't lock ended up scratching the triangular side panels under the seat a bit, which was annoying.

I ended up removing the fuse box and taking out the middle locking pin as I was afraid it was preventing the seat from sitting down on the frame properly, but it ended up being the front metal bars that hook on the frame loops.  They weren't bent down enough to allow the seat to sit flat.  After a bit of bending, I was finally able to get the seat to click into place.

I'm sitting higher on this new, firm Corbin seat, but it's supposed to soften over time, so I think the height will ease a bit too.  The 'gripper' fabric feels quality and tough and isn't particularly grippy.  I'm able to move around on it quite easily and I'm hoping it breathes a bit better than leather would.  Hot seat in the summer is one of the things I'm hoping this solves.

I'd be happier with Corbin communicating (at all) and I'd have been a lot happier with the stratospheric shipping charge if it took care of border costs too.  Paying the equivalent of airfare from San Francisco seems a bit excessive, especially when I get to deliver it to myself anyway.  If you're ever on holiday in northern California, pre-order your seat and then pick it up from the factory near San Jose and save yourself a pile of cash.

Overall?  I'm happy with the seat.  The upside is a quality seat that you can make uniquely yours for what I consider a reasonable amount of money for a bespoke item like this.  When people are dropping twice this on slip on exhausts and helmets, the Corbin starts to look like good farkling value.  It certainly makes a statement and as one of the key connection pieces between rider and motorbike, it's a customization option that does a lot to make a bike feel special.

I just got back from a 232km romp across the Niagara Escarpment.  Never once did I have to stop due to numb bum.  That's never happened before.



Thursday 25 April 2019

Winding River Road on an Easter Monday Morning

Riding River Road on Easter Monday morning.  The day promised to warm up, but it was cool in the valley.  With little traffic and miles of winding road, the Tiger was frisky and I was ready to explore some corners.

With the ThetaV 4k video camera wrapped around the rear view mirror, I proceeded down the hill on Prince of Wales Road to River Road before heading east.  The Theta seems to kick off when it hits two gigs of video.  4k video is heavy and you reach two gigs after only five minutes, so here is five minutes of riding down into the valley before it chokes on itself. 


I couldn't stop at the Terra Nova Public House (closed for the holiday), but on the way back I went back to my happier medium of still photography and set the ThetaV at its one photo every four seconds rate to catch some corners, which I then chased down on my way back through the valley to Horning's Mills.  Later in the year it'll be quite busy, but on this early spring holiday, there were only a smattering of other vehicles and the corners were open and empty...

Riding through the desolation of winter before spring green is back.



Neutral throttle in, winding it on through the apex and out the other side. The Tiger is a settled, athletic thing for such a big bike.


Some Photoshopping to give it a painted look.  That scalloped sky followed me all the way home.



I ride an hour out of my way just to find that magical sign.

Terra Nova might have been closed, but Brewed Awakenings in Grand Valley was open with hot coffee and a date square ready to go.

Saturday 13 April 2019

Gold Winging It

My buddy Jeff is heading off to the West Coast and a golden retirement shortly, so he's cleaning up and vacating Ontario (good time to be doing it).  One of his motorcycle herd is a GL1800 Goldwing.  He offered Max and I a ride last weekend to see if it worked for us since Max is now a full sized adult and your typical motorcycle is overloaded with two big guys on it.  A few years ago I rode Jeff's daughter's Honda Firestorm, by far the sportiest bike I've ever ridden.  This time around we were way up the other end of the spectrum with the 'Wing.


That seat looks mighty appealing to a kid who has been forced to ride motorcycle saddles since he was eight.  Not only is it recliner comfortable, it's also heated!  The rest of the bike is equally enormous and astonishingly appointed.  With fourteen year old, adult sized Max on the back, we had no points of physical contact, which is strange because we're usually back to chest on the Tiger, which is a big bike in its own right.

We rode out of Jeff's place on a dirt farm road in South Western Ontario, in April, so it was really wet and soft... on an eight hundred pound gorilla, uh, bike, with 430ish pounds of us on it.  The 'Wing handles our size without a problem, but the whole thing rolling down the road is massive, so massive in fact that you just ride through puddles and mud and ignore variations in the road that I'd be skirting around on a typical bike.  The Tiger is a sure footed thing, but it felt a bit skittish on the muddy driveway, not so the 'Wing.

Once out on the road the first thing that hits you is no wind, at all.  I ended up flipping open my helmet even though it was a cool day because of the zero wind blast.  No wind noise, no buffeting, it didn't really feel like riding a bike.  All the elemental cues that I get from riding were gone.  I'm looking out through a screen instead of over one and the fairings cover you head to toe.

The dash looks back at you with a staggering array of buttons. My car doesn't have half that many. The tachometer looks like the one out of my old Civic, and red lines lower. It took me ten minutes of riding to work out where the heated grips and seats were. The grips themselves are meaty, way thicker than any I've used before; my hands didn't quite wrap around them.

On pavement you twist the throttle and get whooshed down the road without drama.  The 'Wing is motorbike quick and smooth, but I wouldn't call it inspiring.  Jeff set a quick pace on his Yamaha Super Ténéré and I had no trouble keeping the twelve hundred pounds of us in sight of him.  I was tentative in the first couple of corners, but once I realized how nimble the 'Wing felt, I just dropped it into corners and trusted the tires to handle us.  I often feel weightless when I'm riding, but as well as the Goldwing handles its size, I was always conscious of it.  In fairness, it also had over four hundred pounds of human on it as well.


The brakes haul it down from speed quickly and it picks up with piles of torque and very little need to change gears, which were smooth and direct when I did use them.  By the end of the ride I was up and
down in the gears without a second thought, so that's a thumbs up from my foot.  The first time I realized I didn't need to cancel the turn signals after a corner was a nice surprise, but habit had me turning them off anyway.  The GPS in the middle of the dash is nice too, but wasn't very bright.

We did a short, half an hour ride around the area, looking for some of the few twists and turns available to us in the agri-desert that is rural Southern Ontario.  Jeff is moving out to Vancouver Island where the riding season is virtually year 'round and the roads are never dull, but the 'Wing isn't making the trip.  The Super Ten and his customized BMW Cafe Racer are going in the container though.

After parking it back up I can say I get the Goldwing.  I understand why it's as popular as it is and what function is serves.  As a device to transport my son and I in comfort it does that, but I find myself back where I was in 2014 pondering the CanAm Spyder.  There comes a point where a motorcycle is trying so hard to be something else that it isn't really a motorcycle any more.  The Goldwing, with its faceful of buttons and speakers and radios and weatherproofed rider cocoon,  removes me from what I think riding is all about.

I'm a number of years into riding now and I've been on all sorts of bikes in all sorts of strange places.  That experience has refined my aesthetic sense of motorcycling.  For me it's all about getting to that feeling of flying.  It's a visceral experience with wind, noise and a sense of lightness.  When you bend into a corner that feeling is amplified.  You can probably see where this is going.  The 'Wing will lean into a corner, but it feels stately and remote when it does it.  Everything feels far away, and ends up begging the question: why suffer the indignities of motorcycling when the bike is trying so hard to be something else?


I can get a lightly used one of these for the same price as a Goldwing.
Given a choice, I'd go for the mini-Mazda Ferrari in a second.
It might sound perverse, but the other side of motorcycling for me is embracing the physical difficulty of the activity.  I don't consider motorcycling a hobby, I consider it a sport and want to attack it with the same physicality.  This philosophy doesn't only contrast with the Goldwing.  Any bike that does all it can to not delivery that immediacy of riding experience misses the mark for me.  Whether it be a Harley tourer or a BMW K1600, any big, heavy cruiser with windshields and fairings and every gizmo imaginable makes me wonder why in terms of motorcycling.  If you want to bring that much stuff with you, go in a car.  In many cases the car is cheaper and more efficient, and contrary to biker prejudice they aren't all cages.

I love to ride, but I'm still smitten with bikes that feel like bikes and focus me on the aesthetics of riding.  When a lightly used Mazda MX-5 RF costs the same as a new Goldwing and looks like a piece of rolling art rather than a compromise, that's where my eye wanders.  Motorcyclists call car drivers cagers trapped in their boxes, but a massive bike that does all it can to not feel like a motorcycle is more of a fetishy gilded cage than any number of cars designed to be entertaining drives.

So, the Goldwing is not for me.  When I get to the point that I can't handle the elemental feeling of riding (a moment I hope I never see), I'll be looking for a Lotus, not a mega-bike.  My son is only a couple of years away from starting the never-ending and sickeningly expensive licensing and insurance process in Ontario.  I'm hoping that he has developed a taste for riding and will one day join me on a ride on his own machine, then we can both revel in the visceral feel of flying down the road together.

Jeff will have no trouble selling his Goldwing on.  He has meticulously maintained it and there is a strong market for 'Wings since there are so many older bikers who are looking for that kind of ride.  I, for one, will miss him when he's gone.  As a motorcycling mentor, he has been a great friend and teacher.  I hope I can get out to see him on the West Coast and ride those magical roads in the future.  In the meantime, I'm feeling more and more like Ontario is getting too tight for me, yet here I stay.