Empty Algonquin Park

I managed a couple of days out on the bike around my birthday this year. Thanks to being freed from the shackles of the school year, I was able to do it outside of the May long weekend when the roads would be utterly mad with with ravening hordes driving the largest SUVs they could find and hauling every possible motorized toy to their second homes in the near north.

It ended up being just over 800kms over two days. 500kms on day one from home and up through and around Algonquin Park, then 320kms home on day two.  The Map.

The ride down Highway 9 to the 400 north was packed solid with transport trucks, to the point where I missed the turn north on Highway 27 because I was literally surrounded by the bloody things.

Finally on the 400 north (which was moving well on the Thursday morning before the long weekend), I let the Kawasaki fly and we shot up the road, finally clear of the convoy. I had three things going for me when I crested a hill right into the eyes of a waiting OPP cruiser.

#1: I was making time in the middle lane rather than the fast lane and was following another car

#2: The bike is awfully difficult to get a reading from thanks to not a lot of metal to bounce radar off of

#3: You can always count on some citiot blasting up the fast lane in a mega-sized German SUV

The cruiser lit the lights and pulled out only to collect said SUV out of the fast lane. He wasn't going much faster than I was but he can enjoy that ticket.

The 400 was (incredibly) fully functional and I was around Barrie in no time and moving up Highway 11 at pace. I pulled into Webbers because they have a nice new Starbucks where I got a coffee and stretched. In under two hours I'd covered the 172kms that got me clear of the gravity of the Greater Toronto Area and into the near north.

After a warm up (it was 5°C when I left just past 9am), I was back on the Kawasaki and heading north again. Gravenhurst was (incredibly) efficient and I slipped past what is often a backup without delay. By 11:30 I was grabbing a quick lunch and filling up in Huntsville and then it was Highway 60 into Algonquin Provincial Park.

I stopped at the West Gate to have a chat with the wardens and get my pass as I intended to stop at the Visitor Centre. After a nice chat with the young ladies at the desk I got my pass, set up the 360 camera and then got in motion ASAP because it's blackfly season and boy do they come out of the woodwork when you stop!

Into the park there was very little traffic. The only one I had to make space for was the massive German SUV thundering through one of the most beautiful places in the province at well over 120kms/hr (it's an 80 zone). If you play your cards like that, you're not likely to see anything!

Once clear of the traffic by the gate things got really quiet. An occasional car would pass the other way but there was nothing on the road in front of behind me as I went deeper into nature. It was midday so I wasn't likely to see any big animals (and I didn't), but birds were plentiful with birds of prey over the road and many others in the bush.

It was a glorious ride alone through the park - a place that comes as close to a church for me as anything can be. The bike was the perfect vehicle. I was moving fast enough to stay ahead of the blood sucking insects, but slowly enough to smell the lakes and woods and feel the thermoclines as a dipped into and out of valleys.

The visitor's centre is worth a stop if you're travelling through the park. The lookout off the back is a great view (and high enough up to be relatively bug free!). I would have stayed for a coffee and a snack but the restaurant was closed. It was a good opportunity to clean the bugs off my visor though.

By now it had hit the high of 12°C for the day and though it was sunny it was cool, especially when in motion on the bike. If I stopped I got sweaty and then the flies would come, so best to keep things moving. Out the east gate and then the plan was to ride south around the bottom of the park.

The Concours had been fantastic on the highways and had handled everything I asked of it. The only place I think the Tiger could have done a better job was on Peterson Road, which is your typical poorly maintained Ontario backroad with ruts and potholes that'll knock your teeth out. The sporty suspension on the Kawasaki didn't enjoy that bit of road. The Tiger's longer suspenders would have done the trick, but otherwise the Concours was the right bike for this ride, especially on the highways.

I finally pulled into Wilberforce about 444kms into the ride for a stretch and a drink (and to clean the bugs off the visor again). 

After a quick pit stop I was on my way again. The 118 is one of my favourite roads in the province and I twisted and turned my way down it towards Canarvon and Minden where I was spending the night. Only a long delay in Haliburton for road works slowed the ride down. At least I know the fans are working on the C14. They cycled three times while we sat there wondering what the f*** was going on. It turned out a water pipe had burst across the road holding things up.

I pulled into the Red Umbrella Inn just outside of Minden at about 5pm. After getting cleaned up I rode into town for some of the best Thai I've had at Suwan's Thai Cuisine and picked up a couple of local craft brews from Boshkung Brewing Social (Minden really has everything you need) before filling up and heading back to the inn for a quiet night by the lake.

The next morning I was up early and over to the Mill Pond for breakfast. Great eggs and bacon and then it was an empty ride down the 118 to Bracebridge, Port Carling and finally Bala for a coffee before the last stretch through Wahta Mohawk Territory before popping out at the 400 and getting into the rapid flow south.

I dodged and weaved around Creemore, stopping once to change into lighter gear because the temperature had shot up with the humidity and made it home before the thunderstorms started. A nice way to spend a couple of days on the road. I only wish I'd had more time.

Closer Adirondack Ride Plan

 A shortened Southern Ontario to the Allegany/Adirondacks mountains in New York State. It's about 300kms to get there, then looping back to a central base means I can ride light without luggage during the stay there. 

Day 1: Home to Adirondack base, 291kms: https://goo.gl/maps/MFo4hLEq69jSg8gC6

Day 2: Watkins Glen Loop 393kms: https://goo.gl/maps/rR8yYs3hv1xmzxL27

Day 3: Allegany Loop, 666, 395kms: https://goo.gl/maps/5DzBsp5p7n8orJTB8 

Day 4: South Loop, 381kms: https://goo.gl/maps/vG7NofL8iugeQo2A8

Day 5: Back home: 293kms: https://goo.gl/maps/xkhNJk7pBeA7zJnR8

That's 1753kms over five days. The nice thing about the loops is they are just an outline. If I don't feel like a high mileage day on any of them, I can cut corners and shorten the loop.

Fall would be the best time to go - end of September/beginning of October seem to offer the best chance of seeing the trees change colour.

Links

Adirondacks: https://visitadirondacks.com/fall

Upstate New York:  https://2wheels.haymondlaw.com/best-motorcycle-rides-upstate-new-york/

https://visitadirondacks.com/recreation/motorcycling

Allegany Motorcycle Trip Map: https://visitanf.com/wp-content/pdf/MRT_Sheets_2017_v2_f.pdf

Riding Versus Flying to BC for Work...

I've got a work thing in Vancouver next month which got me thinking about incorporating a ride to the west coast and back. Turns out flying is much cheaper (even with car rental) than riding...

Cost of flying/ ($200 return) + renting a car for the week (inc. gas + taxes = $1100): ~$1300 total.

Total mileage riding out and back: ~8800kms. at 0.58 cents/kms = ~$5100 (not counting hotels enroute). Flying is way cheaper! I'd save on having to rent a car while out there, but the costs of moving myself there (as opposed to being luggage on a plane) are significant.

If I took the week off before the week I needed to be in Vancouver, could I ride out there in that time? It's about 4400kms to get there. Saturday to the following Sunday is nine days on the road, which works out to under 500kms/day. Intense but certainly doable.

4400kms out at 500kms/day = 9 days (8 nights of hotel). Going cross-Canada on the way out: https://goo.gl/maps/zBYBMzkMqsxDrMx67 = 4436kms. 9 days on the road at 500kms per day = 4500kms.

After the week on the ground in Vancouver, I'd take 2 weeks off to come back through the States, hitting key points like Yellowstone National Park. The way back through the US, even with the detour down to Yellowstone, is 4462kms: https://goo.gl/maps/RHEUUiSrxCCj6V7g7

It would probably be wise to factor in a tire change at some point on this 10k odyssey. I imagine they're cheaper and easier to find in the States, so I'd throw on some new shoes and get an oil change and service once south of the border.

Riding out would chew up 3 weeks of vacation but would offer a chance to cross most of the continent on two wheels. In a perfect world I could find work related stops on the way out across Canada and get that week covered (mileage and hotels), then use 2 weeks of holiday for the return through the US.

Motels in Canada on the way out look to be between $120-150 a night (x 8 nights = $1200 in not fancy housing). If I stayed out of cities (where hotel pricing seems to have lost its mind), I could come in under budget if I was aiming at $150/night (taxes in) on average. Hotel prices in the States look similar.

Budget (assuming I covered all costs)

Hotel stays going out (8 nights @ $150/night avg taxes in) = $1200

Hotel stays coming back (12 nights @ $150/night avg taxes in) = $1800

Gas/day = $60* (= 2 tankfulls and ~700kms range/day on the C14) x 20 days on the road = $1200

Tires & Service: Bellevue Kawasaki in Seattle on the way back $1000

Travel eating: breakfast**: $10, Lunch: $20, Dinner: $30 = $60/day avg. x  20 days = $1200

Estimated total cost for a 3 week cross continent 2-wheeled odyssey: $6400

*  Well over what I'd need/day mileage wise and will be cheaper in the US
** If I'm staying a breakfast included hotel then I can save there

That budget isn't being overly stingy and I should be able to come in ahead on it. It might also be possible to shave days off if I get into a groove (say, on the Praries) and do a couple of big mileage highway days. If I got good at a last minute booking app like HotelTonight I could probably save a bit on the hotel stays too. Another alternative might be to stay at the same chain all the way across and save that way.

We did it by car preCOVID and it was an epic trip. Riding would make it even better!

Lots of 8s

 

I've been on the road for work for the past couple of weeks (Newfoundland is spectacular!) The weather from there followed us back and we haven't seen the sun for many days, until this weekend! It finally broke and I've gotten some riding in.

I was hoping to get the old Tiger to 100k this year in its 20th year on the road. On the way to that I managed to hit eighty-eight thousand, eight hundred and eighty-eight kilometres! Very satisfying, and the bike looked great doing it:

I pushed my luck the next day and took Connie out for a couple of hours to Hockley Valley and back...

Weather's been good this week too, maybe we're finally into spring time! I had the C14 out again for a ride over to the Forks of the Credit after work today... time to make some miles!

Past Another Cold, Dark Winter

 I'm getting back out with regularity now that the worst of the winter is past. Both of the regular road bikes are fit and took to the road effortlessly. I had a bit of a breakthrough with the Concours14 last year and we're understanding each other a bit more. It's a big old bus but it's remarkably agile for how big it is and we've come to a kind of mutual kinesthesis, but I still took the Tiger out first because it's like putting on an old shoe....

... and we picked up right where we stopped. The goal is still to get to 100k this year in the bike's 20th year on the road, and I think we're good to get there.

I took the Tiger out again for some exercise in the gaps between snow and ice at the end of March....

But when I took both bikes out between the ice storms of April (isn't Canada magical?)...

I enjoyed the Connie so much that in another break in this never ending winter last week the C14 got pulled out in front of the Tiger (which enjoys pride of place in the garage).

I took the bigger road home and passing cars was like being on an arrow loosed from a bow; what a monster that bike is! ...And yet so versatile with piles of luggage space, no chain maintenance and (now that I've got the tires and shocks worked out), exceptional handling for its size. All of that and the adjustable windshield makes it feel a bit like flying an F14 Tomcat.

The Bonneville project is still not getting the time it deserves, but I'm in a new phase of work and I'm enjoying pouring my time and energy into that. In the meantime, both road-ready bikes are facing a promising riding season.

Rings and Carburetors: Swimming Upstream on this Vintage Motorcycle Restoration Project

The never ending winter drones on up here, so I'm putting my back into getting the '71 Triumph Bonneville project closer to a state of mobility.

I have a new 750cc head and pistons on hand, so I gave the piston rings a go. Installing them is pretty straightforward and the first set went in no problem, but as I was compressing the second set into the cylinder sleeve it didn't feel right, so I backed everything out and the bottom ring came out in pieces. I can only think it was already compromised in the package.

I sent Britcycle an email and they looked through the warehouse to see if they had any extras laying around, but I was out of luck, so it's a $100 failure (new rings, taxes, shipping). Ouch. This got me looking at costs for this vintage project. The last one I did was the Fireblade. Those are my favourite kinds of restorations. Parts are easy to find and relatively inexpensive, the bike is rideable fairly quickly and, after riding it for a season, I can turn it over for at least what I put into it (or with a small profit as was the case with the Fireblade).

New cylinder heads and cylinders... and broken ring.

 

I think I'm still right way up on the Bonneville simply because these older bikes seem to work under their own economy. I was looking up prices of what I've got on eBay this evening and the frickin owners manual that Bryan threw in at the last minute is $50US! A used top end is $500US (and Bryan gave me 2 of the things!). I imagine I could double my money just parting it all out, though dealing with people doing that would be a giant pain in the ass - at least it has been with the newer bike crowd, maybe the vintage types are less adversarial.

I had a couple of choices when I was considering going old school, and I think I picked the hardest possible one to bring back to life. The technical side of it doesn't bother me, but with costs increasing all around I'm bothered more about the high prices and difficulty finding and shipping parts than I am with what I've got to do to bring it back. That old BSA would have probably been a better choice for my first vintage resto, but it (and alas, Bryan) are long gone.

I've got what I've got, and I've got a lot of it, and I'm crafty. I'll see what I can do about replacing fasteners and the other bits and pieces I'm missing without it breaking the bank, those these strange old British pre-metric fasteners are a story unto themselves. The goal right now is to rebuild the bike to an operational state and then maybe ride it for a bit before putting it up for sale. I still need a seat and exhausts and I'll need other odds and ends like control cables. If I can get it back to a state of play, I think I can cover costs and move it along, then I'm thinking I'll go back to my favourite hunting grounds: forgotten bikes from the 80s, 90s and 00s that I can turn over for next to nothing while giving me a chance to ride something different for a little while.

When the ring crumbled on me I changed gears and rebuilt the Amal carbs. That went well, but I'm missing two of the bolts to put the second carb back together - they weren't on it when I wiped the mud and rust away. It's these little setbacks that stall things, and it's not like I can grab a couple of replacements out of my big tray of bolts (most of which are metric).

 

How simple can you make a carburettor? These old Amals are pretty close to first principles. The combination of archaeology and simple mechanics is very appealing when everything else I ride carries a computer and my day job is all about them - it's nice to be fully analog!

I'd broken down the carbs in the fall and left them packaged in a segmented toolbox. Putting them back together was problem free and the kits I got from Britcycle replaced all the gaskets and rubber grommets in them. The old rubber bits were really showing their age.

Guess which one is the 50 year old ring (I;m assuming they're original)?

Just need some bolts (at $3.50US a pop)

If money and time were no object I'd dig deeper into this vintage resto thing - I dig the mechanical simplicity and I enjoy seeing how mechanical evolution happens over time. As a hobby in retirement, it has great appeal, but I'm some years away from that much free time on my hands.

I'll see this one through and then refocus on the SPQR-WRO (small profit, quick return - with riding opportunities) side of it where the costs and time commitments aren't quite so demanding.