Thursday 21 April 2016

Your Typical Sunday Ride Isn't My Typical Sunday Ride

a 260km amble around
theNiagara Escarpment
.
I cranked out some miles on the Tiger this weekend.  On Saturday it was a 160km round trip down to Ancaster for a conference, on Sunday I left with a buddy from work along with his wife and son on a big 260km loop out to the Niagara Escarpment and back.

Jeff was two up on his new-to-him Goldwing and he son was on his dad's Super Ténéré.  We left Fergus following the Grand River and immediately came upon two cruisers burbling down the road next to each other.  Any questions I had about passing etiquette on other bikers were quickly put aside when Jeff dropped a gear and blew by the two of them without a second glance.   They (politely) went into single file so that we could catch the fleeing Goldwing without crossing a solid line.

Chasing the Noisy River into
Creemore is always a nice ride.
Elora to Creemore happened in a snap and the Tiger was becoming more and more familiar with each mile traveled.  Chasing the Noisy River into Creemore was well timed on empty roads and the Tiger and I had no trouble keeping up with the more experienced riders around me.

We stopped for lunch in Creemore and then helped a Harley rider try and jump start his dead, brand new bike (his typical Sunday ride, but I like my dependable, thirteen year old Triumph).  He eventually found a local who offered to jump start the bike from a truck.  After working up a sweat pushing a Harley up and down Main Street for a several minutes in our modern, textile body armor (while being watched by groups of leather clad bikers who I'm sure felt great kinship with the old fella whose bike wouldn't start, but not so much that they wanted to help), we headed south toward River Road.


In addition to being a windy road in a
place that doesn't have many, River
Road also has the benefit of taking
longer than five minutes to complete.
The River Road was a twisty delight.  Riding a bike is a fine thing, but the moment I'm off the crown of the tire I feel like I'm earning bonus points.  At my first training course towards the end of day two they set up cones and we were allowed to weave through them at speed and then ride a decreasing radius circle.  I stopped at one point and said to the instructor, "I could do this all day!"  The lean of a bike is nothing short of fighter-pilot magical (even Top Gear digs it).

River Road was a rollercoaster ride until we once again arrived on the tailpipe of a cruiser.  On any straight this guy would gun it, making a pass impractical (200km/hr passes, while possible, aren't wise on twisty country roads).  We spent the last bit taking the corners at floor board friendly speeds.

The action cam was clipped to a front
fairing for the twisty bits.
In Shelbourne there was a big, new sign advertising the Veteran's Highway pointing south, so rather than go over to the overcrowded Highway 10 I thought we should try it.  The moment we were past the last factory two hundred yards down the road the "Veteran's Highway" turned to dirt.  The Tiger seemed frisky and excited to be on the loose stuff, feeling very sure footed for such a big bike.  Behind me the Super10 was also rolicking in the gravel, but the two-up Goldwing?  When we stopped Jeff referred to it as an adventure two-up mobility scooter.  We turned left toward the highway at the first paved intersection.

The wave on River Road
Back at Highway 10 I once again suggested we push onto unknown roads in northern Mono Hills.  This road also quickly turned to gravel, but this time loose, twitchy gravel.  I'm bad at picking roads.  We ended up turning around and heading back to 10 before burning south and enjoying some time in Mono Hills and Hockley Valley.

We wrapped up the ride with a quick blast down the Forks of the Credit, which had the road closed into Belfountain, before heading back to Elora in lengthening shadows.

I got home sun and wind burned and wonderfully exhausted.  Can't wait to do it again!

Dropping into Hockley Valley.


That 'Lucifer Orange' paint just pops!

Working the corners of the Forks

Jeff making a three point turn on a Goldwing 2-up look easy.

Forks of the Credit: the road into Belfountain was closed, so a bevy of sports bikes were parked on the road.

The artful exhaust pipes on the Tiger.

Stopping for a break in Hockley Valley before heading down to the Forks of the Credit


Sunday 17 April 2016

Affidavits & Broken Ownerships

The XS1100 is finally mine.  After buying it off a clueless millennial who had managed to lose all useful paperwork associated with the bike, I've been able to re-establish ownership.  Here's how you do it:

In order to reconnect continuity of ownership you need to get a signed affidavit from a legal notary.  Your local town government will have a notary on hand that can sign, stamp and date your declaration of ownership (they'll offer this as a service).  I stopped in at the Centre Wellington Town Offices in Elora and explained the situation (clueless kid was previous owner, etc).  I showed them the ownership history the MTO had printed out for me (all six pages of it!), and the letter of sale from the previous owner.  I also said I'd made repeated attempts to find the last legal owner (I suspect he's deceased).

The county clerk (who is a notary) signed, dated and stamped the affidavit I provided (that's it above), and I took it back to the MTO office the next day.  In just a couple of minutes I paid the taxes on the sale price and the bike was attached to my name and a new ownership was printed out.  They keep all the relevant paperwork, including the affidavit.

It's a bit of a pain in the neck to reestablish ownership, but it's not particularly expensive (twenty bucks to get it signed) and just takes a bit of leg work by the new owner.  I'd argue a hundred bucks off the price for your time and costs to get the bike sorted - more if the previous owner is a tool (which they probably are if they lost all their paperwork).

Riding The Tiger

When you want to start riding in April in Canada
you need to take precautions!
Today saw a 150km round trip down to Ancaster and back; the first ride of the season.  It was 2°C when I left at 7:15am this morning.  No frost, but a cold ride to start.

I stopped in Kirkwall, by the kirk, for a stretch and to remove the balaclava.  By the time I got down to Ancaster for an educational conference it was warming up nicely.

I was out of the conference about 2pm.  By that time the temperature was pretty much perfect for a ride.  I took the main road into Ancaster and then up Sulfur Springs and Mineral Springs Roads, doing a loop before heading back north.


A cold start.
The Tiger was fantastic, feeling more powerful than the Concours with a much more relaxed riding position.  At first the higher riding position felt a bit awkward, but I quickly discovered that the Metzeler tires and taut suspension, even though it's long, could handle any corners I threw at them.  Any cornering awkwardness had at least as much to do with me being rusty from a winter in boxes as it did with the bike's geometry.

There were dozens of other bikes out and about in the warm weather.  The Tiger got a lot of double takes.  I know it shouldn't matter but in a couple of days of riding I've already had more compliments than I did in a year of riding on the Concours.  Halfway home I was thinking I could leave for Ushuaia immediately on this fine machine.

Once home I checked over the fluids.  The Tiger barely used any gas, and the oil and coolant was right where I'd left them.  I've got an air filter on hand (the previous owner said, "air filter?" when I asked if it had been done recently), but I don't want to miss a ride while I'm doing it now that the weather's good.  I'm hoping a mid-week after work change will give me the time to get it done.  To do the air filter means pulling the gas tank - it's not as easy as it's been on previous bikes.

A short stop in Kirkwall got the balaclava off (t made the helmet uncomfortably tight)

The twisty road sign is in short supply in Southwestern Ontario -
Sulphur Springs Road & Mineral Springs Road are exceptions.


Riding a Tiger really is a magical experience!
We've already got a route planned out for a sunny, warm Sunday  in April:

Friday 15 April 2016

Triumph Tiger History

First gen Tiger from the late '30s
I've been finding out the history of Triumph Tigers from various places on the interwebs. The first Tigers were born just before World War 2 and were quickly put on hold when the war started. With rigid rear frames and girder front suspensions, these were 1930s bikes in every sense.

Tigers followed the steady evolution in motorbike technology throughout the Twentieth Century, and also followed some rather silly styling trends, like shrouding the mechanicals in 1950s aero inspired nonsense.


'69 Tiger made in the UK the same
year I was!  Nice high pipes!

Pam Anderson riding
a Tiger!
Things get interesting again in the 1960s, with late '60s Tigers, along with the British motorcycle industry in general reaching a zenith before being crushed by their own weight and a lithe, hungry wave of Japanese imports.


Through the long, dark tea time of the soul in the '70s and '80s (and while my parents and thousands of others fled the country) Triumph went down in flames along with much of British manufacturing.  In '83 John Bloor, a building contractor who was looking into the purchase of the derelict Triumph factory to build more homes ended up buying the brand.  After sitting on it for a while he rebooted it and built a new factory.  

It's one of the best examples of British manufacturing rising out of the ashes of old money and old ideas and embracing a more effective approach to manufacturing.  Without the conservative  establishments of aristocratic ownership and unionized labour Bloor was able to reignite British engineering and give it chance to shine again.  You might think that it isn't properly British if it isn't mired in limited social mobility and the kind of Kafka-esque bureaucracy that makes building something well next to impossible, but that was only a moment in Twentieth Century British history and doesn't speak to the engineering prowess of our little island.

After Triumph rebooted in the early '90s, the Tiger reappeared in '93 during the second wave of model introductions.  An early example of what came to be known as adventure bikes, the Tiger was a tall, long suspension, multi-purpose machine running a three cylinder engine.  

Having tapped into this trend while it was still only popular in continental Europe, Triumph's Tiger line has been a key part of their brand for the past twenty plus years.  If asked what bike I'd want to take around the world tomorrow, the Tiger Explorer is at the top of the list.

Tigers have been around, in one form or another, since before World War Two.  I'm looking forward to getting to know the one I found this month.


TigerLinks:
http://www.motorcyclenews.com/news/2013/march/mar1113-triumph-tifer-timeline/
http://www.classic-british-motorcycles.com/1969-triumph-tr6.html
https://en.wikipedia.org/wiki/Triumph_TR6_Trophy
http://www.triumphworld.co.uk/pages/triumph-enthusiasts/all-things-triumph/tiger-history.htm
http://www.rat-pack.com/TriumphHistory.php
http://www.gregwilliams.ca/?p=1693
http://www.ianchadwick.com/motorcycles/triumph/time03.html

















Monday 11 April 2016

Tiger Tales in a Never Ending Winter

It's been an icy, crappy spring, but it looks like the end is nigh!
Tiger tales on a wintery April Weekend.  Last year at this time  Max and I were out doing a 300km+ run to Blue Mountain in some fresh Ontario spring air.  It was cold, and even flurried in places, but it was doable on dry roads with winter well behind us.

After another round of freezing rain last night we were up to ten degrees today.  Over the next few days it looks like riding season will start officially.  The Tiger is at my local mechanic getting saftied.  I should be on the road and ready to go by 
Wednesday, the day everything starts to get better.  In the meantime, while waiting for the ice age to end, I've been playing with some digital imaging:


Tigertester by timking17 on Sketchfab - a 3d model of the Tiger

Soon enough I'll be able to stop looking at it and starting to ride it!


Variations on a garage photo:




3d printed Triumph logo
I backed the Tiger out while trying to get the carbs sorted on the Concours - 2 hours later is was a white out out here.











3d printed Triumph logo

Triumph logo 3d printed

Dremel 3d printer doing the business
I scanned the Tiger with a Structure Sensor and then printed the 3d model on the Dremel 3d printer - not just a model
of a bike, but an exact scale model of my bike!


Sunday 10 April 2016

on the Verge of the Future

Sunday morning with a 3d
printer - I get a kick out of
making things work.
One of the best parts of my job is that I get to lay my hands on leading edge technology in order to figure it out so I can teach it.  I've always been an early adopter, if no no else has it I'm interested - more so if everyone else is afraid of it.  When most people didn't know that TVs had alternate inputs I had a home computer with a printer.  When everyone was crying about how fuel injection meant no one could customize their vehicles any more I was hacking the on-board computer and using it for diagnostics and more horsepower.

Nowadays it's all about how digital tools are making micro/bespoke manufacturing more possible.  Where once you needed an engineer, some machinists and a couple of hundred thousand dollars to build complex components, now you need twenty grand and a willingness to pick up some very easy to manage software.  The entry into machining your own, custom components has become much easier.

Not only are digital tools handing back basic production to individuals, they are also allowing companies to explore levels of precision in manufacturing that seem almost science fictional:
We've had 3d printers in the classroom now for a couple of years, and we find them invaluable for prototyping and even developing 3d thinking (not something students take to naturally).

I suspect the wedding-cake style melting-plastic-through-an-extruder 3d printer is an evolutionary dead end (there is only so much you can do to speed up a printing process that works around cooling plastic).  Fortunately, the next step has already happened:
... I'd love to get my hands on one of those.

Another building tool I'd like to try is a digital laser cutter.  Like other manufacturing tools, digital laser cutters have been tumbling in price.  Coming out this year is a desktop laser cutter called the Glowforge that'll introduce laser cutting, etching and fabrication to many more people.  At only about $4000, this undercuts previous industrial units by tens of thousands of dollars.

With this kind of technology available to many more people, I get the sense that the garage of the future will allow us to build things that only get churned out by factories at the moment.  When I'm at the point that I can custom manufacture and laser etch bespoke motorcycle hard parts and print my own fairings, I'll feel like my garage can keep up with my imagination.

A good guess might be the garage scene from Big Hero 6:
We're on the verge of escaping from the mass-production Twentieth Century.  One day you'll be telling your grand kids that we had to buy shoes that weren't custom printed specifically for your feet, and they won't believe you.


Recent advances in processing power and
optics mean VR is finally (after decades of
promise) arriving at a consumer level.
Last week I discovered that I'm going to be able to set up an HTC Vive in the lab.  We're doing it so we can better craft the 3d models we're building in Unity and Blender, but immersive simulation could offer a lot of opportunities in the classroom beyond 3d modelling.  The emotional impact on a student walking across Vimy Ridge the day after, or walking through Cambodia's killing fields, or standing on the Moon and looking back at the Earth, get me revved up about making VR work in the classroom.

From a motorcycling perspective, an immersive simulation of the MotoGP circuit on Valentino's bike would offer fans a new level of appreciation for the sport.  Preparing for an overseas ride by tasting the trip virtually first offer opportunities for safety preparation that simply don't exist right now, especially if you're trying to wrap you head around new signs and riding on the wrong side of the road.

We're on the verge of the future, and I get another taste next week, I can't wait!


3D printing

motorcycle 3d printing: http://3dprintingindustry.com/2015/08/03/motorcycle-3d-printing-picking-speed/

https://3dprint.com/65937/3d-printed-motorcycle/

http://www.stratasys.com/resources/case-studies/automotive/klock-werks

https://all3dp.com/3d-printed-motorcycles-know/

https://grabcad.com/library/128705


Virtual Reality

https://youtu.be/-Sd3wXNjLtk

http://motorbikewriter.com/victory-motorcycle-virtual-reality/

http://www.lifebuzz.com/virtual-motorcycle/

http://mashable.com/2015/03/13/oculus-victory-motorcycles-sturgis/

http://www.cnet.com/roadshow/news/skully-opens-pre-orders-for-high-tech-helmet/

Sunday 3 April 2016

Motorcycle Carburetor Rebuild Part Eleventy-Seven (airbox boots)

The carburetor rebuild grinds on.  It took the better part of a week to get the airbox boots in, and when I opened the bag they came in I'd been charged for four but only got three.  I tried contacting Two Wheel Motorsports to ask if the fourth boot was sitting around there, but they didn't get back to me.  

The Concours uses two types of boots to connect the carbs to the airbox and one of the old ones still had pretty good flexibility in it, so I used the three new ones and the best of the old ones.

I tried for the better part of two hours to get the carbs mated to the airbox properly with the stiff, old airbox boots without success.  With my home-made hooked screwdriver (to slip the boots onto the intakes) it took about ten minutes of adjusting to get a good seal on all four carbs.  If you're doing an old carb rebuild, buy some new airbox boots, it'll save you a  lot of frustration and swearing.

The old airbox boots look rough, but the real issue is that the rubber has hardened over time and no amount of heat will soften them up.  The new boots were supple and easily went on the carb air intakes with minimal fuss and bother.
I pay for four and get three.  Fortunately one of the old ones was still pretty supple so I could reuse it.
Ten minutes and the carbs are back in place.  Get new airbox boots if you're rebuilding an old carb!